15 Best and Coolest Lath Screws

 

8 x 3 Phillips Modifed Truss K-Lath Screw Zinc Plated 100

8 x 3 Phillips Modifed Truss K-Lath Screw Zinc Plated (100)

8 x 3 Phillips Modifed Truss K-Lath Screw Zinc Plated (100) - Commonly called a “k-lath” screw. 8 x 1-1/4″ modified truss head for simpson strong-tie. 1,000 piece carton. 410 stainless steel self drilling screw great for drilling through light steel. Phillips head recess.

 

25lb 8x1-58 Lath Screws - Sharp point

25lb 8×1-5/8″ Lath Screws – Sharp point

25lb 8×1-5/8″ Lath Screws – Sharp point - Drives with a #2 phillips bit. Modified truss head provides extra bearing surface. Drives with a #2 square bit. Phillips square recess allows for more torque. Sharp point for attaching to wood. Drives with a psd2-2 bit included. Clear zinc finish.

 

8 x 2 K-Lath Self Drilling Screws - 1000 Pieces - Truss Head Phillips Drive 410 Stainless Steel Hardened 2 Drill Point -

#8 x 2″ K-Lath Self Drilling Screws – 1,000 Pieces – Truss Head, Phillips Drive, 410 Stainless Steel (Hardened), #2 Drill Point -

#8 x 2″ K-Lath Self Drilling Screws – 1,000 Pieces – Truss Head, Phillips Drive, 410 Stainless Steel (Hardened), #2 Drill Point - - For attaching metal lath to heavy gauge (14-16 gauge)steel studs. 1,000 pieces. #8 x 2″ stainless steel trim k-lath self drilling screws. Hardened 410 stainless steel, #2 drill point. Phillips drive, low profile truss head,.

 

8 x 1 58 Phillips Modifed Truss K-Lath Screw Black Oxide 100

8 x 1 5/8 Phillips Modifed Truss K-Lath Screw Black Oxide (100)

8 x 1 5/8 Phillips Modifed Truss K-Lath Screw Black Oxide (100) - Zinc plated. Widely used for wood-to-metal applications such as metal lath in stucco/other to 20-16 steel studs. Phillips modified truss head (k-lath) screws. Unspsc 31161500. Self drilling.

 

25lb 8x34 Lath Screws - Drill point

25lb 8×3/4″ Lath Screws – Drill point

25lb 8×3/4″ Lath Screws – Drill point - Drives with a #2 square bit. Drill point for attaching to metal. Modified truss head provides extra bearing surface. Clear zinc finish. Drives with a #2 phillips bit. Drives with a psd2-2 bit included. Phillips square recess allows for more torque.

 

The Hillman Group 82200 8-Inch x 916-Inch Modified Truss Lath Self Piercing Screw 100-Pack

The Hillman Group 82200 8-Inch x 9/16-Inch Modified Truss Lath Self Piercing Screw, 100-Pack

The Hillman Group 82200 8-Inch x 9/16-Inch Modified Truss Lath Self Piercing Screw, 100-Pack - There is no pre-drilling required, making these easy to use. Ideally, they are used for thin metal such as sheet metal and duct work. These self-piercing screws feature an undercut head design to help provide great holding power and stability.

 

8 x 916 Phillips Modifed Truss K-Lath Screw Black Oxide 100

8 x 9/16 Phillips Modifed Truss K-Lath Screw Black Oxide (100)

8 x 9/16 Phillips Modifed Truss K-Lath Screw Black Oxide (100) - . Intercorp strong-point® k-lath screws are designed to attach wire lath to wood or light gauge metal. Meets astm a510 for carbon steel manufacturing.

 

25lb 8x1-14 Lath Screws - Drill point

25lb 8×1-1/4″ Lath Screws – Drill point

25lb 8×1-1/4″ Lath Screws – Drill point - Clear zinc finish. Drill point for attaching to metal. Drives with a #2 square bit included. Drives with a #2 phillips bit. Phillips square recess allows for more torque. Drives with a psd2-2 bit included. Modified truss head provides extra bearing surface.

 

The Hillman Group 47281 8 x 1-Inch Lath Screw Needle Point

The Hillman Group 47281 8 x 1-Inch Lath Screw Needle Point

The Hillman Group 47281 8 x 1-Inch Lath Screw Needle Point - The product is manufactured in china. Easy and simple use kit. The product is 1″ x #8, zinc truss head self-piercing point lath screw. Self piercing screws penetrate metal and tap their own mating threads to eliminate the need for prepunched holes. Steel/zinc plated. Quantity per pack 1lb. Drill point requires no pilot hole.

 

8 x 1 Phillips Modifed Truss K-Lath Screw Black Oxide 100

8 x 1 Phillips Modifed Truss K-Lath Screw Black Oxide (100)

8 x 1 Phillips Modifed Truss K-Lath Screw Black Oxide (100) - Widely used for wood-to-metal applications such as metal lath in stucco/other to 20-16 steel studs. Zinc plated. Self drilling. Phillips modified truss head (k-lath) screws. Unspsc 31161500.

 

ITW Brands 21525 8-18 x 34 Teks Phillips Head Lath Screws 600 Pack

ITW Brands 21525 #8-18 x 3/4″ Teks Phillips Head Lath Screws (600 Pack)

ITW Brands 21525 #8-18 x 3/4″ Teks Phillips Head Lath Screws (600 Pack) - 600 pack, #8-18 x 3/4″, teks phillips head lath screws, for metal to wood or metal 26-22 gauge & other metal to metal applications without needing to pre-drill, feature engineered drill points & flutes that remove material efficiently & properly size the hole for threads. .

 

The Hillman Group 47284 8-Inch x 2-Inch Lath Screw

The Hillman Group 47284 8-Inch x 2-Inch Lath Screw

The Hillman Group 47284 8-Inch x 2-Inch Lath Screw - Can be used to attach metal lath to steel studs. Lath screws provide secure metal to metal fastening and strong holding power without the need to pre-drill. . Great for applications requiring a wide, low-profile head.

 

8 x 34 Phillips Modifed Truss K-Lath Screw Zinc Plated 100

8 x 3/4 Phillips Modifed Truss K-Lath Screw Zinc Plated (100)

8 x 3/4 Phillips Modifed Truss K-Lath Screw Zinc Plated (100) - For attaching metal lath to steel studs or corrugated siding panels to steel studs. 8 x 9/16″. The hillman group 47280 8 x 9/16-inch lath screw needle point. 1,000 piece carton. Phillips drive, modified truss head self driller.

 

25lb 8x1-14 Lath Screws - Sharp point

25lb 8×1-1/4″ Lath Screws – Sharp point

25lb 8×1-1/4″ Lath Screws – Sharp point - Clear zinc finish. Drives with a psd2-2 bit included. Drives with a #2 phillips bit. Modified truss head provides extra bearing surface. Phillips square recess allows for more torque. Sharp point for attaching to wood. Drives with a #2 square bit.

 

The Hillman Group 47280 8 x 916-Inch Lath Screw Needle Point

The Hillman Group 47280 8 x 9/16-Inch Lath Screw Needle Point

The Hillman Group 47280 8 x 9/16-Inch Lath Screw Needle Point - Easy and simple use kit. The product is lb 3/4×8 zn lath screw. Drill point requires no pilot hole. #2 phillips drive. The product is manufactured in china. Steel/zinc plated. Quantity per pack 1lb. Self piercing screws penetrate metal and tap their own mating threads to eliminate the need for prepunched holes.