15 Top Torque Multipliers

 

Comie Heavy Duty Torque Multiplier Set Wrench Lug Nut Labor Saving Wrench Lugnuts Remover Truck Trailer RV Semi 4pcs Sockets wCase by Comie

Comie Heavy Duty Torque Multiplier Set Wrench Lug Nut Labor Saving Wrench Lugnuts Remover Truck Trailer RV Semi 4pcs Sockets w/Case by Comie

Comie Heavy Duty Torque Multiplier Set Wrench Lug Nut Labor Saving Wrench Lugnuts Remover Truck Trailer RV Semi 4pcs Sockets w/Case by Comie - Made from extra sturdy alloy steel to withstand daily wearfree four sockets suitable for air impact gun usage. 1 x tall long bar and 1 x rocking barmaximum safe output 4800 n/mtrans-speed ratio 158.

 

Tenive Heavy Duty Lug Nut Labor Saving Tool Torque Multiplier Socket Wrench Set with Case 4 sockets

Tenive Heavy Duty Lug Nut Labor Saving Tool Torque Multiplier Socket Wrench Set with Case, 4 sockets

Tenive Heavy Duty Lug Nut Labor Saving Tool Torque Multiplier Socket Wrench Set with Case, 4 sockets - Including four 1″ drive deep impact sockets (41mm, 38mm, 33mm, sq 21mm). Package with durable plastic case that easy for transport. Great tools for loosen and removes lug nuts from truck, trailer, rv,bus,tractor or other heavy-duty vehicle. Overall size154″l x38″wxx89″h. Max torque output 4800 nm and trans-speed ration 158.

 

Stanley Proto  J6212RD  34-Inch Drive Torque Multiplier Square Drive Replacement Kit

Stanley Proto J6212RD 3/4-Inch Drive Torque Multiplier Square Drive Replacement Kit

Stanley Proto J6212RD 3/4-Inch Drive Torque Multiplier Square Drive Replacement Kit - Torque multiplier square drive replacement kit 3/4-inch drive size use with j6212, j6212cert. . Stanley j6212rd proto 3/4-inch drive torque multiplier square drive replacement kit proto torque multipliers provide overload protection with replaceable output square drives that are designed to twist off at 3%-10% over maximum output capacity.

 

Torque Multiplier Heavy-Duty Lug Wrench Replaces 1 Air Impact - WARRANTY

Torque Multiplier Heavy-Duty Lug Wrench Replaces 1″ Air Impact – WARRANTY

Torque Multiplier Heavy-Duty Lug Wrench Replaces 1″ Air Impact – WARRANTY - After the nut is unscrewed use the long bar to disassemble quickly. Torque 3200nm 2. When the sleeve is put on the net to be disassembled or fastened pay attention to the direction of loosening an tightening. 6. Max. Labor saving wrench is a newly designed wheel wrench for easy loosen truck tires lug nut or car tires by using less labor to reach a sufficient output torque with out impact or compressor need. (First use the long bar to screw on quickly and then use labor saving wrench instead during tightening). 7. Roll the rocking bar so that the handle is against the side of another bolt tightly. 10. 8. Put the sleeve onto the square head of the handle end and the rocking bar on the other end. The wrench can be used to disassemble various kinds of truck tires the easy way. Gear ratio 158 3. 1. With 7pcs socket 24 , 27 , 30 , 32 , 33 , 36 , 38mm (socket length 75mml) 5. 9. These are all 1 inch drive sockets, but any 1 inch socket will fit the output shaft of the wrench. Square driver 1″ 4.

 

OEMTOOLS 25683 34 Drive Torque Multiplier by OEMTOOLS

OEMTOOLS 25683 3/4 Drive Torque Multiplier by OEMTOOLS

OEMTOOLS 25683 3/4 Drive Torque Multiplier by OEMTOOLS - /lbs. Input 3/4 in. /Lbs. (3,000 nm)ratio 31can be used with 3/4 in. Drive outputcomes in a sturdy blow mold case. Drive (f), max 730 ft. (1,000 nm)output 1 in. Drive wrenches x 1 in. Drive (m), max 2,200 ft.

 

Neiko 03716B Professional Grade Torque Multiplier by Neiko

Neiko 03716B Professional Grade Torque Multiplier by Neiko

Neiko 03716B Professional Grade Torque Multiplier by Neiko - Torque ratio 351. Wright tool perfecting performance. Input drive 3/4-inch square female output drive 1-inch square male. Neiko 03716b professional grade torque multiplier. Gear ratio 42671.

 

Proto J6232CERT Torque Multiplier Cert

Proto J6232CERT Torque Multiplier Cert +/

Proto J6232CERT Torque Multiplier Cert +/ - â€¢Maximum rated output 3,200 ft/lb (4,338 nm). •Gear system single stage planetary. S. I. (National institute of standards and technology). •Angle of turn protractor 5° increments. •Proto® certified program for customers requiring the paperwork that documents traceability to n. Features•maximum rated input 173 ft/lb (235 nm). •Standard torque accuracy is +/- 5% of reading. •Reaction system tubular reaction bar. T. •Anti-backlash device self-contained, 3 position. .

 

Torque Multiplier Set Wrench Lug Nut Lugnuts Remover Labor Saving RV Semi Socket

Torque Multiplier Set Wrench Lug Nut Lugnuts Remover Labor Saving RV Semi Socket

Torque Multiplier Set Wrench Lug Nut Lugnuts Remover Labor Saving RV Semi Socket - The wrench can be used to disassemble various kinds of truck tires the easy way. This labor saving wrench is a very sturdy tool, and it’s designed as a wheel wrench for easy loosen truck tires lug nut or car tires by using less labor to reach a sufficient output torque with out impact or compressor need. Sturdy and durable kit tool heavy duty construction. Perfect for cars, trucks, buses, and other heavy duty vehicles deep impact sockets included high impact storage case.

 

Stanley Proto J6212CERT Torque Multiplier 1200-Feet Pound

Stanley Proto J6212CERT Torque Multiplier, 1200-Feet Pound

Stanley Proto J6212CERT Torque Multiplier, 1200-Feet Pound - I. Standard torque accuracy is +/- 5% of reading. Certification documents traceable to n. T. Maximum rated output 1200 ft-lbs (1626 nm). Reaction system tubular reaction bar. Gear system single stage planetary. (National institute of standards and technology). Stanley j6212cert proto torque multiplier 1200 ft-lbs maximum rated input 200 ft-lbs (271 nm). Angle of turn protractor 5° increments. S.

 

Torque Multiplier Wrench  Lug Nut Remover 12 Drive Socket 17 19 21 Tire Change

Torque Multiplier Wrench | Lug Nut Remover 1/2 Drive Socket 17 19 21 Tire Change

Torque Multiplier Wrench | Lug Nut Remover 1/2 Drive Socket 17 19 21 Tire Change - Product details heat treated alloy steel construction with the big trans-ratio, it will allow more output torque while using less force torque output 800 nm trans-speed ratio 116 1/2″ square drive 3 sockets in each set 17mm, 19mm, 21mm.

 

TORQUE MULTIPLIER LABOR SAVING LUG NUT WRENCH

TORQUE MULTIPLIER LABOR SAVING LUG NUT WRENCH

TORQUE MULTIPLIER LABOR SAVING LUG NUT WRENCH - Maximum torque output 5000 nm (3687 ftlbs). Trans speed ratio 158. Suitable for trucks, buses, rvs and other heavy duty vehicles. Includes 2pc 1″ drive 30 & 32 mm deep impact sockets. Cast iron housing and handle.

 

Klutch Torque Multiplier

Klutch Torque Multiplier

Klutch Torque Multiplier - Pieces (qty. ) 3/4, material type steel. ) To high torque (max. It utilizes a 31 ratio planetary gear set to convert low torque (max. -Drive 2-way quick release ratchet. /Lbs. ) For heavy-duty tightening or loosening operations. -Lbs. Includes a 3/4in. ) 2, tool length (in. -Drive ratchet to dramatically increase torque output. Use this klutch torque multiplier along with the included 3/4in. -lbs. 2,200 ft. 730 ft. ) 730-2,200, drive (in. ) 19 7/10, storage type plastic case, torque range (ft.

 

Neiko 03716B Professional Grade Torque Multiplier

Neiko 03716B Professional Grade Torque Multiplier

Neiko 03716B Professional Grade Torque Multiplier - Output 1″ drive maximum 2,000 ft-lb. Input 3/4″ drive maximum 650 ft-lb (900nm). Neiko pro brand. Pro quality construction. Multipliers 3 times.

 

Stanley Proto  J6222RD  1-Inch Drive Torque Multiplier Square Drive Replacement Kit

Stanley Proto J6222RD 1-Inch Drive Torque Multiplier Square Drive Replacement Kit

Stanley Proto J6222RD 1-Inch Drive Torque Multiplier Square Drive Replacement Kit - Torque multiplier square drive replacement kit 1-inch drive size use with j6222, j6222cert, j6234. Stanley j6222rd proto 1-inch drive torque multiplier square drive replacement kit proto torque multipliers provide overload protection with replaceable output square drives that are designed to twist off at 3%-10% over maximum output capacity. .

 

Beta 5643R 1 Drive Torque Multiplier 3000 NM Torque Range 251 Ratio

Beta 564/3R 1″ Drive Torque Multiplier, 3000 NM Torque Range, 25:1 Ratio

Beta 564/3R 1″ Drive Torque Multiplier, 3000 NM Torque Range, 25:1 Ratio - Beta code number 005640003 with anti wind up system with 251 ratio. Due to the high multiplication factor, they are provided with anti-wind up ratchet systems in both directions (built in the input side). To prevent the accumulated forces from being released back to the operator at each tightening sweep, and to allow progressive release once the operation is completed. These multipliers are lighter and less bulky than model 565. Measures 108mm diameter by 155mm length by 188mm height.