16 Coolest Dry Diamond Core Drills in 2020

 

3-Pack DPT 3-Inch Laser Welded Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt 3 Diameter x 11 Length

3-Pack DPT 3-Inch Laser Welded Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, 3″ Diameter x 11″ Length

3-Pack DPT 3-Inch Laser Welded Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, 3″ Diameter x 11″ Length - Length 11″ long to produce 10″ core. 5/8″-11 thread. Segment height 0400″. Laser wielded. 3 pack, the professional quality laser welded dry diamond core bits offers the best lifetime available on market.

 

3-Pack DPT 1-14-Inch Laser Welded Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt 1-14 Diameter x 11 Length

3-Pack DPT 1-1/4-Inch Laser Welded Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, 1-1/4″ Diameter x 11″ Length

3-Pack DPT 1-1/4-Inch Laser Welded Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, 1-1/4″ Diameter x 11″ Length - Laser wielded. Length 11″ long to produce 10″ core. Segment height 0400″. 5/8″-11 thread. 3 pack, the professional quality laser welded dry diamond core bits offers the best lifetime available on market.

 

Steel Dragon Tools 85D with 15in 2in 4in 45in 5in Dry Diamond Core Drill Bits

Steel Dragon Tools 85D with 1.5in. 2in. 4in. 4.5in. 5in. Dry Diamond Core Drill Bits

Steel Dragon Tools 85D with 1.5in. 2in. 4in. 4.5in. 5in. Dry Diamond Core Drill Bits - Motor 2,000 w, 115 v, 60 hz, 2,000 rpm. Drill bits 1-1/2 in x 6 in, 2 in x 6 in, 4 in x 6 in, 4-1/2 in x 6 in, and 5 in x 6 in. Carrying cases for core drill and bits are included. Drills up to 5-inch holes in concrete, asphalt, block, brick, and more. Includes 3-piece dry masonry core drill bits.

 

Professional Quality 2-12-Inch Laser Welded WetDry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt Professional Quality Fast Drilling 2-12 Diameter x 17 Length

Professional Quality 2-1/2-Inch Laser Welded Wet/Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Professional Quality, Fast Drilling, 2-1/2″ Diameter x 17″ Length

Professional Quality 2-1/2-Inch Laser Welded Wet/Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Professional Quality, Fast Drilling, 2-1/2″ Diameter x 17″ Length - The professional quality wet/ dry diamond core bits offers the best lifetime available on market, fast drilling for concrete and asphalt. Laser wielded. 1-1/4-7 thread. Segment height 0400″. Length 17″ long to produce 13-1/2″ core.

 

Professional Quality 3-Inch Laser Welded WetDry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt Professional Quality Fast Drilling 3 Diameter x 17 Length

Professional Quality 3-Inch Laser Welded Wet/Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Professional Quality, Fast Drilling, 3″ Diameter x 17″ Length

Professional Quality 3-Inch Laser Welded Wet/Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Professional Quality, Fast Drilling, 3″ Diameter x 17″ Length - The professional quality wet/ dry diamond core bits offers the best lifetime available on market, fast drilling for concrete and asphalt. Laser wielded. 1-1/4-7 thread. Segment height 0400″. Length 17″ long to produce 13-1/2″ core.

 

Dry Diamond Core Drill Drilling Bit for Stone Masonry Slabs 127mm x 150mm

Dry Diamond Core Drill Drilling Bit for Stone Masonry Slabs 127mm x 150mm

Dry Diamond Core Drill Drilling Bit for Stone Masonry Slabs 127mm x 150mm - For dry drilling through brick and block work the diamond tips will cut a smooth hole turbo segments make it faster cutting action and longer life expectancy slots in the barrel make for an easy dust extraction whilst drilling as well as this it also allows you to push the block work out that may get stuck in the centre of the drill diamond core for strength and durability will fit any standard core drill adaptor width is perfect for 5″ drain pipe amongst others this size specifications total width, 127mm / 5 inches total height, 150mm arbor size, 1/2″ bsp. Professional core drill for commercial or occasional use diamond core drill suitable for concrete, brick, paving slabs, asphalt limestone, clay bricks and aerated block suitable for plumbers, professional tradesman etc.

 

Professional Quality 7-Inch Laser Welded WetDry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt Professional Quality Fast Drilling 7 Diameter x 17 Length

Professional Quality 7-Inch Laser Welded Wet/Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Professional Quality, Fast Drilling, 7″ Diameter x 17″ Length

Professional Quality 7-Inch Laser Welded Wet/Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Professional Quality, Fast Drilling, 7″ Diameter x 17″ Length - Length 17″ long to produce 13-1/2″ core. 1-1/4-7 thread. Laser wielded. Segment height 0400″. The professional quality wet/ dry diamond core bits offers the best lifetime available on market, fast drilling for concrete and asphalt.

 

Dry Diamond Core Drill Drilling Bit for Stone Masonry Slabs 152mm x 150mm

Dry Diamond Core Drill Drilling Bit for Stone Masonry Slabs 152mm x 150mm

Dry Diamond Core Drill Drilling Bit for Stone Masonry Slabs 152mm x 150mm - Will fit braked knott couplings models kfg13 kfg20 kfg27 & kfg30. It is recomended that damaged gators are changed as soon as possible. Includes new nuts and cable tie. (Natural length, not stretched or shrunk) damaged, split or missing gators allow grit and debris into the draw bar slide tube causing excessive wear to the coupling. (Braked hitches normally have a plate showing the model number). 60mm and 65mm open ends. Suitable for eyelet couplings only, will not fit standard 50mm ball couplings. This listing is for a genuine replacement gator / bellows for knott hitches / couplings fitted with the eyelet hitch head. Approx 140mm total length.

 

DBM IMPORTS 1 x 140 Dry Diamond Core Drill Bit for Soft Brick Masonry 10mm Rim

DBM IMPORTS 1” x .140” Dry Diamond Core Drill Bit for Soft Brick Masonry 10mm Rim

DBM IMPORTS 1” x .140” Dry Diamond Core Drill Bit for Soft Brick Masonry 10mm Rim - 1” x 140” dry diamond core drill bit for soft brick masonry 10mm rim. Unit dim l x w x h (in) 1 x 1 x 10-1/2 estimated. Threaded nuts 5/8″-11 tube length 10″ rim 10mm. Quantity 1 unit weight 11 ounce. Designed to use in dry designed for drilling on soft brick, concrete block, lightweight block, masonry and other similar materials.

 

1-38 Dry Diamond Core Drill Bit - Granite Marble Hole Saws

1-3/8″ Dry Diamond Core Drill Bit – Granite Marble Hole Saws

1-3/8″ Dry Diamond Core Drill Bit – Granite Marble Hole Saws - 1-3/8″ tube length to hold up under extreme heat and cutting pressure. Core bit intended for drilling on granite, marble and similar materials. Specially formulated supreme quality segments provide smooth and clean cutting in granite, marble and similar materials. For dry cutting. Full range of sizes for virtually any job. This dry core bit also has impregnated with silicon carbide electroplated on the outside of tube ideal for beveling and eliminates pinching and heat build up.

 

Professional Quality 6-Inch Laser Welded WetDry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt Professional Quality Fast Drilling 6 Diameter x 17 Length

Professional Quality 6-Inch Laser Welded Wet/Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Professional Quality, Fast Drilling, 6″ Diameter x 17″ Length

Professional Quality 6-Inch Laser Welded Wet/Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Professional Quality, Fast Drilling, 6″ Diameter x 17″ Length - Length 17″ long to produce 13-1/2″ core. Segment height 0400″. Laser wielded. 1-1/4-7 thread. The professional quality wet/ dry diamond core bits offers the best lifetime available on market, fast drilling for concrete and asphalt.

 

2-12-Inch Laser Welded Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt 2-12 Diameter x 11 Length

2-1/2-Inch Laser Welded Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, 2-1/2″ Diameter x 11″ Length

2-1/2-Inch Laser Welded Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, 2-1/2″ Diameter x 11″ Length - 5/8″-11 thread. The professional quality laser welded dry diamond core bits offers the best lifetime available on market. Laser wielded. Segment height 0400″. Length 11″ long to produce 10″ core.

 

3-12-Inch Laser Welded Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt 3-12 Diameter x 11 Length

3-1/2-Inch Laser Welded Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, 3-1/2″ Diameter x 11″ Length

3-1/2-Inch Laser Welded Dry Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, 3-1/2″ Diameter x 11″ Length - 5/8″-11 thread. The professional quality laser welded dry diamond core bits offers the best lifetime available on market. Length 11″ long to produce 10″ core. Laser wielded. Segment height 0400″.

 

2Pcs Box 1-38 Dry Diamond Core Drill Bit 58-11 Thread for Granite 35mm Masonry Coring

2Pcs/ Box 1-3/8” Dry Diamond Core Drill Bit 5/8′-11 Thread for Granite 35mm Masonry Coring

2Pcs/ Box 1-3/8” Dry Diamond Core Drill Bit 5/8′-11 Thread for Granite 35mm Masonry Coring - Use wet or dry drilling for stone, wet using will greatly prolong the segment life. Diameter is 1-3/8”,5/8”-11 thread install on polishers or grinders. It is designed for dry drill core to granite on the job site. Vacuum brazed side protection offers clean cut & steel core protection. High frenquency/laser welded available.

 

PROLINEMAX 2-1 Dry Diamond Core Drill Bit for Soft Brick Concrete Block 58-11 Threads

PROLINEMAX 2-1/” Dry Diamond Core Drill Bit for Soft Brick Concrete Block 5/8″-11 Threads

PROLINEMAX 2-1/” Dry Diamond Core Drill Bit for Soft Brick Concrete Block 5/8″-11 Threads - Thread size 5/8″, 11 threaded nuts overall dimension 2-1/2”l x 2-1/2”w x 10-1/2”h estimate only. Intended for drilling a variety of soft brick, concrete block, lightweight block, masonry, and other similar materials dry use. Tube length 10″ quantity 1. 2-1/2” x 140” dry diamond core drill bit. 10mm rim weight 2 lbs estimate only.

 

Armeg CDD038 38 mm Dry Diamond Core Drill by Armeg

Armeg CDD038 38 mm Dry Diamond Core Drill by Armeg

Armeg CDD038 38 mm Dry Diamond Core Drill by Armeg - Ideal for waste pipes, water feed pipes, cable entry / exit, flue passage, extractor fans, exhausts and dust extractor ducting. Dry diamond core drills can be used in general concrete, soft bricks, lightweight blocks, natural stone and limestone. Designed for deep core drilling, with the ability to core through a standard brick in one action.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.