17 Best and Coolest Drill Mills

 

Melin Tool AMG-DP1 Carbide Drill Mill Uncoated Bright Finish 30 Deg Point Angle 2 Flutes 15 Overall Length 0125 Cutting Diameter 0125 Shank Diameter

Melin Tool AMG-DP1 Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter

Melin Tool AMG-DP1 Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Available in 90 degree points. Can be used for drilling, slotting, chamfering, and profile milling. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

Drill America MMO116-4FSE Solid Carbide End Mill Polished Finish 4 Flute Square End 14 Cutting Length 116 Cutting Diameter 1-12 Length 18 Shank Pack of 1

Drill America MMO1/16-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 1/4″ Cutting Length, 1/16″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1)

Drill America MMO1/16-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 1/4″ Cutting Length, 1/16″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1) - 4 flute single end. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Available in polished finish. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems.

 

Titan TC34912 Solid Carbide Drill Mills 4 Flute 60 degree Point 30 degree Angle Helix AlTiN Coated 316 Size 316 Shank Diameter 2 Overall Length 58 Length of Cut

Titan TC34912 Solid Carbide Drill Mills, 4 Flute, 60 degree Point, 30 degree Angle Helix, AlTiN Coated, 3/16″ Size, 3/16″ Shank Diameter, 2″ Overall Length, 5/8″ Length of Cut

Titan TC34912 Solid Carbide Drill Mills, 4 Flute, 60 degree Point, 30 degree Angle Helix, AlTiN Coated, 3/16″ Size, 3/16″ Shank Diameter, 2″ Overall Length, 5/8″ Length of Cut - Drill mills enjoy great popularity in job shop environments because of their versatility in performing a wide range of applications including drilling, chamfering, countersinking, spotting and profile milling. .

 

RedLine Tools RDM20104 - Drill Mill 60 Degree 15000 Length 0625 Diameter 1875 Flute Length 2 Flute AlTiN Coated Carbide End Mill

RedLine Tools RDM20104 – Drill Mill 60 Degree, 1.5000″ Length, .0625″ Diameter, .1875″ Flute Length, 2 Flute, AlTiN Coated, Carbide End Mill

RedLine Tools RDM20104 – Drill Mill 60 Degree, 1.5000″ Length, .0625″ Diameter, .1875″ Flute Length, 2 Flute, AlTiN Coated, Carbide End Mill - Number of flutes 2. Diameter 0625″. Substrate/coating carbide / altin coated. Made in the usa. Flute length 1875″.

 

Kodiak Cutting Tools KODIAK241957 USA Made Solid Carbide Drill Mill 4 Flutes 90 Degree AlTiN Coated 14 Diameter 14 Shank 34 Length of Cut 2-12 Overall Length

Kodiak Cutting Tools KODIAK241957 USA Made Solid Carbide Drill Mill, 4 Flutes, 90 Degree, AlTiN Coated, 1/4″ Diameter, 1/4″ Shank, 3/4″ Length of Cut, 2-1/2″ Overall Length

Kodiak Cutting Tools KODIAK241957 USA Made Solid Carbide Drill Mill, 4 Flutes, 90 Degree, AlTiN Coated, 1/4″ Diameter, 1/4″ Shank, 3/4″ Length of Cut, 2-1/2″ Overall Length - . 1/4 inch diameter solid carbide drill mill 1/4″ shank 3/4″ length of cut 2-1/2″ overall length 4 flute carbide, drill mill.

 

Drill America MMO12-2FSE-BN Solid Carbide End Mill Polished Finish 2 Flute Ball End 1 Cutting Length 12 Cutting Diameter 3 Length 12 Shank Pack of 1

Drill America MMO1/2-2FSE-BN Solid Carbide End Mill, Polished Finish, 2 Flute, Ball End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length, 1/2″ Shank (Pack of 1)

Drill America MMO1/2-2FSE-BN Solid Carbide End Mill, Polished Finish, 2 Flute, Ball End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length, 1/2″ Shank (Pack of 1) - Round shanks allow use with a wide variety of toolholding systems. 2 flute single end ball. Available in polished finish. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Drill America MMO732-4FSE Solid Carbide End Mill Polished Finish 4 Flute Square End 58 Cutting Length 732 Cutting Diameter 2-12 Length 14 Shank Pack of 1

Drill America MMO7/32-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 5/8″ Cutting Length, 7/32″ Cutting Diameter, 2-1/2″ Length, 1/4″ Shank (Pack of 1)

Drill America MMO7/32-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 5/8″ Cutting Length, 7/32″ Cutting Diameter, 2-1/2″ Length, 1/4″ Shank (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Available in polished finish. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. 4 flute single end. Round shanks allow use with a wide variety of toolholding systems.

 

Melin Tool CCMG-DP Carbide Drill Mill Uncoated Bright Finish 30 Deg Point Angle 4 Flutes 35 Overall Length 0625 Cutting Diameter 0625 Shank Diameter

Melin Tool CCMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 4 Flutes, 3.5″ Overall Length, 0.625″ Cutting Diameter, 0.625″ Shank Diameter

Melin Tool CCMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 4 Flutes, 3.5″ Overall Length, 0.625″ Cutting Diameter, 0.625″ Shank Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Available in 90 degree points. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Can be used for drilling, slotting, chamfering, and profile milling. Round shanks allow use with a wide variety of toolholding systems.

 

Drill America MMO12-4FSE-BN Solid Carbide End Mill Polished Finish 4 Flute Ball End 1 Cutting Length 12 Cutting Diameter 3 Length 12 Shank Pack of 1

Drill America MMO1/2-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length, 1/2″ Shank (Pack of 1)

Drill America MMO1/2-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length, 1/2″ Shank (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Available in polished finish. 4 flute single end ball. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

RedLine Tools RDM40316 - Drill Mill 90 Degree 25000 Length 2500 Diameter 7500 Flute Length 4 Flute Uncoated Carbide End Mill

RedLine Tools RDM40316 – Drill Mill 90 Degree, 2.5000″ Length, .2500″ Diameter, .7500″ Flute Length, 4 Flute, Uncoated, Carbide End Mill

RedLine Tools RDM40316 – Drill Mill 90 Degree, 2.5000″ Length, .2500″ Diameter, .7500″ Flute Length, 4 Flute, Uncoated, Carbide End Mill - Made in the usa. Flute length 7500″. Diameter 2500″. Number of flutes 4. Substrate/coating carbide / uncoated.

 

Melin Tool AMG-DP1 Carbide Drill Mill AlTiN Monolayer Finish 30 Deg Point Angle 2 Flutes 25 Overall Length 025 Cutting Diameter 025 Shank Diameter

Melin Tool AMG-DP1 Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 2.5″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter

Melin Tool AMG-DP1 Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 2.5″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter - Aluminum titanium nitride is similar to tialn but with a higher aluminum content for improved hardness and smoothness. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Can be used for drilling, slotting, chamfering, and profile milling. Round shanks allow use with a wide variety of toolholding systems. Available in 90 degree points.

 

Grizzly G0704 Drill Mill with Stand

Grizzly G0704 Drill Mill with Stand

Grizzly G0704 Drill Mill with Stand - This great little machine sports some of the same features found on much larger mill/drills dovetail column, variable speed 1 hp motor, r-8 spindle with digital read out, tapered gibs with double locks, large 7-1/16″ x 26-5/8″ table and it comes with its own stand this is an excellent value and great for just starting out or even as a dedicated, single-purpose machine in the shop features • dovetail column • safety shut off switch • spindle speed dro • fine feed head control • 2-speed gearbox • clear guard on spindle • rubber chip guards on ways • zero setting dials • dials read inches • forward/reverse switch • stand with chip tray and cabinet measures 16″ l x 16″ w x 31″ h specifications • motor 1 hp, 110v, 12a, single-phase • spindle taper r-8 • spindle travel 2″ • t-slots 3 @ 2-1/2″ centers, 7/16″ wide • head travel 11″ • head tilt 90° l/r • max. Distance spindle to table 13″ • swing 15″ • table travel (longitudinal) 18-7/8″ • table travel (cross) 6-7/8″ • table size 7-1/16″ x 26-5/8″ • spindle speed 50-2250 rpm • approximate shipping weight 362 lbs.

 

Micro 100 DM-250-490 4 Flute 90° Included Point Angle Drill Mill 14 Cutter Diameter 14 Shank Diameter 34 Flute Length 25 Overall Length Solid Carbide Tool

Micro 100 DM-250-490 4 Flute 90° Included Point Angle Drill Mill, 1/4″ Cutter Diameter, 1/4″ Shank Diameter, 3/4″ Flute Length, 2.5″ Overall Length, Solid Carbide Tool

Micro 100 DM-250-490 4 Flute 90° Included Point Angle Drill Mill, 1/4″ Cutter Diameter, 1/4″ Shank Diameter, 3/4″ Flute Length, 2.5″ Overall Length, Solid Carbide Tool - For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Depending on the application, the drill mill can also be utilized as a chamfering tool as well. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Tools can be utilized for both roughing and finishing. Designed and engineered to perform both drilling and milling applications when applicable. The micro 100 dm-250-490 uncoated , 4 flute, solid carbide, 90° included point angle, drill mill. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. Manufactured with close tolerances to ensure ultimate precision and performance. Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes.

 

Magafor 8090 Carbide Drill Mill Uncoated Bright Finish 90 Deg Point Angle 2 Flutes 2-38 Overall Length 025 Cutting Diameter 516 Shank Diameter

Magafor 8090 Carbide Drill Mill, Uncoated (Bright) Finish, 90 Deg Point Angle, 2 Flutes, 2-3/8″ Overall Length, 0.25″ Cutting Diameter, 5/16″ Shank Diameter

Magafor 8090 Carbide Drill Mill, Uncoated (Bright) Finish, 90 Deg Point Angle, 2 Flutes, 2-3/8″ Overall Length, 0.25″ Cutting Diameter, 5/16″ Shank Diameter - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. This multi use bits can be used for spotting, grooving, engraving, profiling, interpolation, drilling and chamfering. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Grizzly G0619 MillDrill 6 x 21-Inch

Grizzly G0619 Mill/Drill, 6 x 21-Inch

Grizzly G0619 Mill/Drill, 6 x 21-Inch - With this machine you. Upgrade to this mill/drill and have all of the great features shown on g0463 and add a tilting head, a multifunction digital scale on the quill, a quick reversing tapping feature, push button speed control and digital speed display.

 

SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and Drill

SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and Drill

SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and Drill - The z-axis handwheel with the fully geared lift system easily lifts and lowers the headstock up to 14-3/4-inch. These features combined with the outstanding x and y table travel of 5-3/4 x 15-1/2-inch make the m1110 mill/drill one of the most popular units available. Enjoy the precision ground dovetail column that allows for fast and easy tool changes without having to re-register the spindle centerline. A 3/4 hp reversible variable-speed universal motor drives an all-steel geared hi/lo range gearbox which drives the 60mm diameter quill and r-8 spindle. Made in an iso 9001 factory. The precision ground cast iron milling table with coolant troughs and drain will accept an aftermarket coolant system and power feed.

 

Yosoo 5x HSS CNC Straight 14 Shank 4 Flute Endmill Milling Cutter 316 Drill Bit

Yosoo 5x HSS CNC Straight 1/4” Shank 4 Flute Endmill Milling Cutter 3/16” Drill Bit

Yosoo 5x HSS CNC Straight 1/4” Shank 4 Flute Endmill Milling Cutter 3/16” Drill Bit - 100% brand new and high quality. 4 flute end mill cutter. New condition with no chips or usage, unflawed. Flutes solid carbide coated end mills. Suit for hardness of metal for above 30 degrees.