17 Top Drill Lengths for 2020

 

Kodiak Cutting Tools KCT110603 USA Made Mechanics Length Drill Bits 2964 Diameter Pack of 6

Kodiak Cutting Tools KCT110603 USA Made Mechanics Length Drill Bits, 29/64″ Diameter (Pack of 6)

Kodiak Cutting Tools KCT110603 USA Made Mechanics Length Drill Bits, 29/64″ Diameter (Pack of 6) - 29/64 inch diameter drill, mechanics length, 6pcs mechanics length drill bits.

 

Irwin Tools 47011 Power Drill Power Pole Auger Bits 716 Shank 1116 Diameter 29 Total Length Single

Irwin Tools 47011 Power Drill Power Pole Auger Bits, 7/16″ Shank, 11/16″ Diameter, 29″ Total Length, Single

Irwin Tools 47011 Power Drill Power Pole Auger Bits, 7/16″ Shank, 11/16″ Diameter, 29″ Total Length, Single - Simply remove it to use round shank. All bits feature 7/16” adaptable hex shank. Power drill power pole auger bits. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips.

 

Chicago Latrobe 159 Series Black Oxide Short Length Drill Set in Metal Case Inch 29-piece 116 - 12 in 64 increments

Chicago Latrobe 159 Series Black Oxide, Short Length Drill Set in Metal Case, Inch, 29-piece, 1/16″ – 1/2″ in 64″ increments

Chicago Latrobe 159 Series Black Oxide, Short Length Drill Set in Metal Case, Inch, 29-piece, 1/16″ – 1/2″ in 64″ increments - Screw machine drill bit set, high speed steel, number of pieces 29, black oxide finish.

 

Cobra Carbide 35515 Micro Grain Solid Carbide Stub Length Drill Bit TiAlN Coated Round Shank Slow Spiral Flute 135 Degrees Split Point 630mm Size 64mm Length Pack of 1

Cobra Carbide 35515 Micro Grain Solid Carbide Stub Length Drill Bit, TiAlN Coated, Round Shank, Slow Spiral Flute, 135 Degrees Split Point, 6.30mm Size, 64mm Length (Pack of 1)

Cobra Carbide 35515 Micro Grain Solid Carbide Stub Length Drill Bit, TiAlN Coated, Round Shank, Slow Spiral Flute, 135 Degrees Split Point, 6.30mm Size, 64mm Length (Pack of 1) - Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (“dry machining”). Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Excellent results in hardening and gummy materials. Round shanks allow use with a wide variety of toolholding systems.

 

High Speed Steel M35 HSS Cobalt Jobber Length Twist Drill Bits General Purpose HSS Cobalt Drill Bit 135 DegSplit Point Drilling Steel Metal Iron 2764

High Speed Steel M35 HSS Cobalt Jobber Length Twist Drill Bits General Purpose HSS Cobalt Drill Bit 135 Deg.Split Point Drilling Steel, Metal, Iron…. (27/64)

High Speed Steel M35 HSS Cobalt Jobber Length Twist Drill Bits General Purpose HSS Cobalt Drill Bit 135 Deg.Split Point Drilling Steel, Metal, Iron…. (27/64) - M35 cobalt high speed steel for drilling steel, stainless steel, hard metal and iron. 135-degree split-point tip starts drilling immediately with less force and eliminates “walking” across the work surface. Diameter 27/64″ flute length 3-15/16″ overall length 5-3/8″ hss e hss co cobalt drill bits. 5pcs packed in a plastic bag for easy usage and store. Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel.

 

Titan TT70701 High Speed Steel Combination Drill Tap 4 - 40 0141 Shank Diameter 1-78 Overall Length 14 Drill Length 00910 Drill 38 Thread Length

Titan TT70701 High Speed Steel Combination Drill & Tap, 4″ – 40″, 0.141″ Shank Diameter, 1-7/8″ Overall Length 1/4″ Drill Length, 0.0910″ Drill”, 3/8″ Thread Length

Titan TT70701 High Speed Steel Combination Drill & Tap, 4″ – 40″, 0.141″ Shank Diameter, 1-7/8″ Overall Length 1/4″ Drill Length, 0.0910″ Drill”, 3/8″ Thread Length - Made in usa. High speed steel. Combined drill & tap.

 

Viking Drill and Tool 66490 SPT-29 Type 260-UB 135 Degree Split Point Mag Super Premium Screw Machine Length Drill Set

Viking Drill and Tool 66490 SPT-29 Type 260-UB 135 Degree Split Point Mag Super Premium Screw Machine Length Drill Set

Viking Drill and Tool 66490 SPT-29 Type 260-UB 135 Degree Split Point Mag Super Premium Screw Machine Length Drill Set - 29 pc set premium screw machine nas 907c 135-degree split point. Special hi-molybdenum tool steel. 135-degree split point for accurate centering and fast penetration. Nas 907c screw machine length. Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance.

 

Tire Repair Drill ReamerKISENG 3mm Drill Bit 60mm Length High Carbide Cutting Tool

Tire Repair Drill Reamer,KISENG 3mm Drill Bit 60mm Length High Carbide Cutting Tool

Tire Repair Drill Reamer,KISENG 3mm Drill Bit 60mm Length High Carbide Cutting Tool - Long lasting high carbide content bit. 1/8″ or 3mm tire repair carbide cutter. Choose the proper carbide cutter and plug stem based on puncture injury size. To remove excess rubber and smooth jagged steel wire in repair areas use with low speed tool. 1/8″ shank has flat side to prevent slippery● 1/8″ or 3mm diameter, 60 mm long.

 

10 Pcs Pack 332 Inch M35 HSS Cobalt Drill Bit Jobber Length Drill Bits Twist Drill Bits 135 Deg Split Point Drilling Steel Meteal Iron

10 Pcs Pack 3/32″ Inch M35 HSS Cobalt Drill Bit Jobber Length Drill Bits Twist Drill Bits 135 Deg. Split Point Drilling Steel, Meteal, Iron.

10 Pcs Pack 3/32″ Inch M35 HSS Cobalt Drill Bit Jobber Length Drill Bits Twist Drill Bits 135 Deg. Split Point Drilling Steel, Meteal, Iron. - 3/32 inch hss cobalt co5% fully ground jobber length twist drills general purpose. Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel. 10pcs packed in a plastic bag for easy usage and store. M35 cobalt high speed steel for drilling steel, stainless steel, hard metal and iron. 135-degree split-point tip starts drilling immediately with less force and eliminates “walking” across the work surface.

 

Micro 100 DCM-005 Straight Flute Double End Combined Drill and Countersink 60° Included Angle Metric Dimensions Solid Carbide Tool 050 mm Drill Diameter 08 mm Drill Length 315 mm Shank Diameter 35 mm Overall Length

Micro 100 DCM-005 Straight Flute Double End Combined Drill and Countersink 60° Included Angle, Metric Dimensions, Solid Carbide Tool, 0.50 mm Drill Diameter, 0.8 mm Drill Length, 3.15 mm Shank Diameter, 35 mm Overall Length

Micro 100 DCM-005 Straight Flute Double End Combined Drill and Countersink 60° Included Angle, Metric Dimensions, Solid Carbide Tool, 0.50 mm Drill Diameter, 0.8 mm Drill Length, 3.15 mm Shank Diameter, 35 mm Overall Length - Each tool’s cutting edge or tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. These tools feature such benefits as accurate centering and spotting. Manufactured with close tolerances to ensure ultimate precision and performance. Tools can be utilized for both roughing and finishing. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Minimizes drill wandering. Designed and engineered for most machining applications that require both pilot drilling and spotting. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. The micro 100 dcm-005 metric, uncoated solid carbide straight flute, double ended, combined drill and 60° included angle countersink.

 

Drill America 21 High Speed Steel Split Point Stub Length Drill Bit Pack of 12 DWDST Series

Drill America #21 High Speed Steel Split Point Stub Length Drill Bit (Pack of 12), DWDST Series

Drill America #21 High Speed Steel Split Point Stub Length Drill Bit (Pack of 12), DWDST Series - Ideal for portable or machine drilling. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Titan TT70723 High Speed Steel Combination Drill Tap 38 - 16 0381 Shank Diameter 3-38 Overall Length 1316 Drill Length 03225 Drill 1-116 Thread Length

Titan TT70723 High Speed Steel Combination Drill & Tap, 3/8″ – 16″, 0.381″ Shank Diameter, 3-3/8″ Overall Length 13/16″ Drill Length, 0.3225″ Drill”, 1-1/16″ Thread Length

Titan TT70723 High Speed Steel Combination Drill & Tap, 3/8″ – 16″, 0.381″ Shank Diameter, 3-3/8″ Overall Length 13/16″ Drill Length, 0.3225″ Drill”, 1-1/16″ Thread Length - Made in usa. High speed steel. Combined drill & tap.

 

Champion Cutting Tool Brute Platinum 29 Piece 116-12 x 64ths  HSS Mechanics Length Twister-XL28 Drill Bit Set-135 Degree Split Point Water Resistant Index-MADE IN USA

Champion Cutting Tool Brute Platinum 29 Piece 1/16-1/2″ x 64ths HSS Mechanics Length Twister-XL28 Drill Bit Set-135 Degree Split Point, Water Resistant Index-MADE IN USA

Champion Cutting Tool Brute Platinum 29 Piece 1/16-1/2″ x 64ths HSS Mechanics Length Twister-XL28 Drill Bit Set-135 Degree Split Point, Water Resistant Index-MADE IN USA - Reduced overall length provides added strength and rigidity flatted shanks for fast chucking in keyless power tools. Better than cobalt-xl28 is able to flex when cobalt drills chip or snap. Ultimate workhorse for drilling steel, stainless steel, titanium alloys and other hard to drill materials. Drill 3x longer (than competitors drills), drill 2x faster (than cobalt), drill accurate (135 deg split point, tapered web geometry). Premium high speed steel and nomo surface treatment for longer tool life, fast penetration, and flexibility self centering 135 degree split point prevents drill from walking.

 

MaxTool 60 Piece Jobber Length Drill Bit Set High Speed Steel HSS M2 Number Wire Gauge 1 to 60 Golden Surface Fully Ground JBS02G10R60

MaxTool 60 Piece Jobber Length Drill Bit Set; High Speed Steel HSS M2; Number Wire Gauge 1 to 60; Golden Surface; Fully Ground; JBS02G10R60

MaxTool 60 Piece Jobber Length Drill Bit Set; High Speed Steel HSS M2; Number Wire Gauge 1 to 60; Golden Surface; Fully Ground; JBS02G10R60 - 135-degree split point prevents “walking”, reduce logging, and penetrates hard material without a pilot hole. Sizes range wire gauge sizes 1# (0228 inch) to 60# (0040 inch). Quality high speed steel m2 provides all drills long tool life. Golden surface finish resists corrosion and increases the hardness of the drill bits. Precision fully ground ensures chips moving smoothly, ultimate accuracy and performace.

 

10 Pcs Pack 1164 Inch M35 HSS Cobalt Drill Bit Jobber Length Drill Bits Twist Drill Bits 135 Deg Split Point Drilling Steel Meteal Iron

10 Pcs Pack 11/64″ Inch M35 HSS Cobalt Drill Bit Jobber Length Drill Bits Twist Drill Bits 135 Deg. Split Point Drilling Steel, Meteal, Iron.

10 Pcs Pack 11/64″ Inch M35 HSS Cobalt Drill Bit Jobber Length Drill Bits Twist Drill Bits 135 Deg. Split Point Drilling Steel, Meteal, Iron. - ●10pcs packed in a plastic bag for easy usage and store. ●Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel. ●135-degree split-point tip starts drilling immediately with less force and eliminates “walking” across the work surface. ● diameter 11/64″ flute length 2-1/8″ overall length 3-1/4″ hss e hss co cobalt drill bits. ●M35 cobalt high speed steel for drilling steel, stainless steel, hard metal and iron.

 

Micro 100 QDC-3X Quick Change Combined Drill Countersink Solid Carbide Tool AlTiN Coated 0109 277 mm Drill Diameter 0109 277 mm Drill Length 1379 348 mm Projection 02500 64 mm Shank Diameter 2-12 64 mm Overall Length

Micro 100 QDC-3X Quick Change Combined Drill & Countersink, Solid Carbide Tool, AlTiN Coated, 0.109″ (2.77 mm) Drill Diameter, 0.109″ (2.77 mm) Drill Length, 1.379″ (34.8 mm) Projection, 0.2500″ (6.4 mm) Shank Diameter, 2-1/2″ (64 mm) Overall Length

Micro 100 QDC-3X Quick Change Combined Drill & Countersink, Solid Carbide Tool, AlTiN Coated, 0.109″ (2.77 mm) Drill Diameter, 0.109″ (2.77 mm) Drill Length, 1.379″ (34.8 mm) Projection, 0.2500″ (6.4 mm) Shank Diameter, 2-1/2″ (64 mm) Overall Length - The micro-quik tooling system provides maximum centerline repeatability within plus or minus 0. Altin coatings are high performance and versatile. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. The micro 100 qdc-3x altin, aluminum titanium nitride coated, solid carbide, combined drill and countersink tool for utilization in the micro-quik change tooling system. Designed and engineered for most machining applications that require both drilling and countersinking. Excellent for dry machining applications. Altin coatings are best suited for alloy steels, stainless steels, tool steels, nickel alloys and titanium. This type of coating also promotes tool life and allows for faster feeds and speeds. Tools can be utilized for both roughing and finishing. Applicable with oxidation temperatures up to 800° c or 1450° f. 0005″ from tool to tool. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Has a higher breakdown temperature while maintaining high surface hardness at elevated temperatures. Their substrate is in class of its own resulting from exclusive treating processes that allow increased speed and feed rates. Manufactured with close tolerances to ensure ultimate precision and performance. When all of this systems components are used together, this unique system reduces machine setup, downtime, tooling costs, and tooling inventories all while boosting productivity.

 

MaxTool 26 Pieces Twist Drill Bit Set Jobber Length High Speed Steel M2 135 Deg Split Point Fully Ground Letter A to Z JBS02H10R026

MaxTool 26 Pieces Twist Drill Bit Set; Jobber Length High Speed Steel M2 135 Deg Split Point Fully Ground Letter A to Z; JBS02H10R026

MaxTool 26 Pieces Twist Drill Bit Set; Jobber Length High Speed Steel M2 135 Deg Split Point Fully Ground Letter A to Z; JBS02H10R026 - Black and golden surface finish resists corrosion and increases the hardness of the drill bits. 135-degree split point prevents “walking”, reduce logging, and penetrates hard material without a pilot hole. Precision fully ground ensures chips moving smoothly, ultimate accuracy and performace. Sizes range letter a (0234 inch ) to z (0413 inch). Quality high speed steel m2 provides all drills long tool life.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.