19 Best Ceramic Tile Blades

 

Diamond 5 Blade for Ceramic Glass and Porcelain Tiles

Diamond 5″ Blade for Ceramic, Glass, and Porcelain Tiles

Diamond 5″ Blade for Ceramic, Glass, and Porcelain Tiles - Continuous rim diamond 5″ tile blade. Continuous rim diamond 5″ tile blade. Intended for all type of ceramic tiles, porcelain, stone marble and granite. Use dry or wet only. Diameter 5″ seg. Guaranteed to give fast cutting on ceramic tiles, quarry tiles, porcelain, stone marble and granite. Width 067″ seg. Supreme tile blade utilizes special grade diamond for very smooth cutting with minimum chipping and long life. Height 10mm arbor 7/8″-5/8″.

 

Rolson 24864 115Mm Ceramic Tile Blade

Rolson 24864 115Mm Ceramic Tile Blade

Rolson 24864 115Mm Ceramic Tile Blade - Dry cutting 22mm diameter center max 80m/s, 13000rpm. 7 thicknes x 5mm cutting depth (fits all makes of 4 1/2″ angle grinders) suitable for cutting ceramic tiles suitable for concrete, plain tiles and brick. 115mm x 1.

 

DEWALT DW4767L 8-Inch Ceramic Tile Blade

DEWALT DW4767L 8-Inch Ceramic Tile Blade

DEWALT DW4767L 8-Inch Ceramic Tile Blade - Xp2 and xp4 blades designed specifically for high power tile saws, allowing quick, free, low heat and straight cutting. Ideally used on thinner and softer masonry materials. Premium xp2 and xp4 cutting matrix means xp2 gives 2 x’s the life of standard blades, xp4 gives 4x’s the life of standard blades. Extended performance diamond matrix provides long life and enhanced material cutting. Xp2 and xp4 blades designed specifically for high power tile saws, allowing quick, free, low heat and straight cutting.

 

DEWALT - 7 in x 0060 in Wet Ceramic Tile Blade -

DEWALT – 7 in. x 0.060 in. Wet Ceramic Tile Blade -

DEWALT – 7 in. x 0.060 in. Wet Ceramic Tile Blade - - Premium series for dry/wet cutting. It can also be made of natural stone, ceramic or glass. Tiles can be made of porcelain.

 

Diamond 4 Blade for Ceramic Glass and Porcelain Tiles

Diamond 4″ Blade for Ceramic, Glass, and Porcelain Tiles

Diamond 4″ Blade for Ceramic, Glass, and Porcelain Tiles - Intended for all type of ceramic tiles, porcelain, stone marble and granite. Continuous rim diamond 4″ tile blade. Height 10mm arbor 7/8″-5/8″. Diameter 4″ seg. Continuous rim diamond 4″ tile blade. Supreme tile blade utilizes special grade diamond for very smooth cutting with minimum chipping and long life. Use dry or wet only. Width 067″ seg. Guaranteed to give fast cutting on ceramic tiles, quarry tiles, porcelain, stone marble and granite.

 

DEWALT DW4761 10-Inch Wet Cutting Continuous Rim Saw Blade with 58-Inch Arbor for Ceramic or Tile

DEWALT DW4761 10-Inch Wet Cutting Continuous Rim Saw Blade with 5/8-Inch Arbor for Ceramic or Tile

DEWALT DW4761 10-Inch Wet Cutting Continuous Rim Saw Blade with 5/8-Inch Arbor for Ceramic or Tile - Xp2 and xp4 blades designed specifically for high power tile saws, allowing quick, free, low heat, and straight cutting. Xp2 and xp3 blades with laser cut expansion slots eliminate blade warping due to heat build-up. Continuous rim design provides chip free cutting in all types of tile. Premium xp2 and xp4 cutting matrix means xp2 gives 2 x-feets the life of standard blades, xp4 gives 4x-feets the life of standard blades. Extended performance diamond matrix provides long life and enhanced material cutting.

 

GilaTools 10 Premium-plus Smooth Cut Ceramic Porcelain Granite Marble Tile Cutting Diamond Saw Blade

GilaTools 10″ Premium-plus Smooth Cut Ceramic Porcelain Granite Marble Tile Cutting Diamond Saw Blade

GilaTools 10″ Premium-plus Smooth Cut Ceramic Porcelain Granite Marble Tile Cutting Diamond Saw Blade - Diameter 10 inch. Cutting method wet only. Engineered from high quality military grade hardened steel to provide 100x longer use than other conventional diamond blades. Arbor/bore size 5/8 inch. Segment height 10mm the concentrated bonded diamond matrix makes this blade the most preferred in the industry for accurate and smooth precision cuts.

 

Mercer Industries 670412 Diamond Blade for Ceramic Tile 45-Inch

Mercer Industries 670412 Diamond Blade for Ceramic Tile, 4.5-Inch

Mercer Industries 670412 Diamond Blade for Ceramic Tile, 4.5-Inch - No wobble while using blade. 4-1/2-inchx060x7/8-inch, 5/8-inch. Lasts 100x longer than an abrasive blade. High diamond concentration. Special bond construction. Hot pressed technology. Steel core with proprietary diamond bond. Tensioned and balanced. Tensioned and balanced, no wobble when using blade. High diamond concentration, allows the blade to last longer and increase efficiency.

 

Diamond 7 Blade for Ceramic Glass and Porcelain Tiles

Diamond 7″ Blade for Ceramic, Glass, and Porcelain Tiles

Diamond 7″ Blade for Ceramic, Glass, and Porcelain Tiles - Guaranteed to give fast cutting on ceramic tiles, quarry tiles, porcelain, stone marble and granite. Continuous rim diamond 7″ tile blade. Diameter 7″ seg. Intended for all type of ceramic tiles, porcelain, stone marble and granite. Use dry or wet only. Width 067″ seg. Height 10mm arbor 7/8″-5/8″. Supreme tile blade utilizes special grade diamond for very smooth cutting with minimum chipping and long life. Continuous rim diamond 7″ tile blade.

 

Diamond 9 Blade for Ceramic Glass and Porcelain Tiles

Diamond 9″ Blade for Ceramic, Glass, and Porcelain Tiles

Diamond 9″ Blade for Ceramic, Glass, and Porcelain Tiles - Intended for all type of ceramic tiles, porcelain, stone marble and granite. Diameter 9″ seg. Use dry or wet only. Height 10mm arbor 7/8″-5/8″. Supreme tile blade utilizes special grade diamond for very smooth cutting with minimum chipping and long life. Guaranteed to give fast cutting on ceramic tiles, quarry tiles, porcelain, stone marble and granite. Width 070″ seg. Continuous rim diamond 9″ tile blade. Continuous rim diamond 9″ tile blade.

 

Diamond 4-12 Blade for Ceramic Glass and Porcelain Tiles

Diamond 4-1/2″ Blade for Ceramic, Glass, and Porcelain Tiles

Diamond 4-1/2″ Blade for Ceramic, Glass, and Porcelain Tiles - Height 10mm arbor 7/8″-5/8″. Continuous rim diamond 4-1/2″ tile blade. Diameter 4-1/2″ seg. Width 067″ seg. Continuous rim diamond 4-1/2″ tile blade. Intended for all type of ceramic tiles, porcelain, stone marble and granite. Use dry or wet only. Supreme tile blade utilizes special grade diamond for very smooth cutting with minimum chipping and long life. Guaranteed to give fast cutting on ceramic tiles, quarry tiles, porcelain, stone marble and granite.

 

Ceramic Tile Blades 50 Teeth Per Inch 3-14

Ceramic Tile Blades, 50 Teeth Per Inch 3-1/4″

Ceramic Tile Blades, 50 Teeth Per Inch 3-1/4″ - Thickness 03″specialty blades should be cooled with water and use only with gfc1 protected outlets or adapters. T-shank blades suitable for jig saws from bosch, aeg, dewalt, ilu, hitachi, makita, metabo, milwaukee and others. Width 5/16″.

 

Diamond 8 Blade for Ceramic Glass and Porcelain Tiles

Diamond 8″ Blade for Ceramic, Glass, and Porcelain Tiles

Diamond 8″ Blade for Ceramic, Glass, and Porcelain Tiles - Premium grade thin-rim blades for porcelain and vitreous tile. Blade can also be used for cutting ceramic tile. Designed for cutting porcelain tile, marble and granite. Blade is known as the hot dog blade because of the shape of the heat slots resemble a hot dog. Reliable precision service and versatile capability. Continuous rim wet cutting blade. Thin kerf, heat slots and special formulation of diamond chips and bond for very hard and dense materials such as porcelain, marble and granite. 4 by 050 by 20 millimeter-5/8 inch. Premium grade tile blade. Stiffening/cooling slots have been designed to guarantee straight cutting in dense porcelain materials.

 

KHK CRT04060D Premium 4-Inch WetDry Continuous-Rim Diamond Blade with 58-78 20mm Arbor for Ceramic Stone Tile

KHK CRT04060D Premium 4-Inch Wet/Dry Continuous-Rim Diamond Blade with 5/8″-7/8″ & 20mm Arbor for Ceramic, Stone, Tile

KHK CRT04060D Premium 4-Inch Wet/Dry Continuous-Rim Diamond Blade with 5/8″-7/8″ & 20mm Arbor for Ceramic, Stone, Tile - Ultra-smooth and precise cuts, great for ceramic, natural stone, and porcelain tile. 5/8″-7/8″ & 20mm knockout arbors, 0060″ edge thickness, 75mm segment height. Contractor-quality blade with optimized bond technology for faster-cutting and longer life. Cuts wet or dry, up to 13,800 rpm maximum. Premium-grade 4″ continuous-rim diamond blade.

 

Diamond 10 Blade for Ceramic Glass and Porcelain Tiles

Diamond 10″ Blade for Ceramic, Glass, and Porcelain Tiles

Diamond 10″ Blade for Ceramic, Glass, and Porcelain Tiles - Supreme tile blade utilizes special grade diamond for very smooth cutting with minimum chipping and long life. Width 070″ seg. Intended for all type of ceramic tiles, porcelain, stone marble and granite. Diameter 10″ seg. Use dry or wet only. Guaranteed to give fast cutting on ceramic tiles, quarry tiles, porcelain, stone marble and granite. Continuous rim diamond 10″ tile blade. Height 10mm arbor 5/8″. Continuous rim diamond 10″ tile blade.

 

7 Inch Diamond Cut Blade Ceramic Tile Turbo Blade 7500 RPM Marble Cutter

7 Inch Diamond Cut Blade Ceramic Tile Turbo Blade 7500 RPM Marble Cutter

7 Inch Diamond Cut Blade Ceramic Tile Turbo Blade 7500 RPM Marble Cutter - Constructed from tough materiel this is a very reliable blade. With a max rpm of 8500 this a strong and durable blade. Hardened steel saw for extra strength. This blade has a diameter of 7″. 7″ diamond saw blade is ideal for use with cutting tile and marble. The segmented design has heat vents that run cool for continuos fast cutting purposes.

 

Ceramic Tile Blades 30 Teeth Per Inch 3-14

Ceramic Tile Blades, 30 Teeth Per Inch 3-1/4″

Ceramic Tile Blades, 30 Teeth Per Inch 3-1/4″ - Width 5/16″. Thickness 03″specialty blades should be cooled with water and use only with gfc1 protected outlets or adapters. T-shank blades suitable for jig saws from bosch, aeg, dewalt, ilu, hitachi, makita, metabo, milwaukee and others.

 

KHK CRT10070D Premium 10-Inch WetDry Continuous-Rim Diamond Blade with 58 Arbor for Ceramic Stone Tile

KHK CRT10070D Premium 10-Inch Wet/Dry Continuous-Rim Diamond Blade with 5/8″ Arbor for Ceramic, Stone, Tile

KHK CRT10070D Premium 10-Inch Wet/Dry Continuous-Rim Diamond Blade with 5/8″ Arbor for Ceramic, Stone, Tile - Cuts wet or dry, up to 6,115 rpm maximum. Contractor-quality blade with optimized bond technology for faster-cutting and longer life. 5/8″ arbor, 0070″ edge thickness, 10mm segment height. Premium-grade 10″ continuous-rim diamond blade. Ultra-smooth and precise cuts, great for ceramic, natural stone, and porcelain tile.

 

MK Diamond 166966 TX - 20 Ceramic Tile Blade 10 X 060 X 1

MK Diamond 166966 TX – 20 Ceramic Tile Blade, 10″ X .060″ X 1″

MK Diamond 166966 TX – 20 Ceramic Tile Blade, 10″ X .060″ X 1″ - This blade also features a 10 inch diameter,. 060 inch width, 1 inch arbor and 7mm rim height. . The tx-20 premium grade tile blade provides dependable performance and long life when cutting ceramic tile and marble.