19 Best Patch Fittings

 

CRL Brushed Stainless Top Door Patch Fitting with Pivot Insert by CR Laurence

CRL Brushed Stainless Top Door Patch Fitting with Pivot Insert by CR Laurence

CRL Brushed Stainless Top Door Patch Fitting with Pivot Insert by CR Laurence - Color brushed stainlessfor 3/4″ (19 mm) glass304 alloy stainless steel covers2-3/4″ (70 mm) pivot setbackcrl top gate patch fittings are used with all three of our gate and door pivots. (88 kg)maximum width 42″ (1092 mm)if the door exceeds any of these limitations, full door rails should be used. It fits in the upper corner of the gate’s glass panel, and requires a hole and cut-out in the glass. Glass fabrication requiredone 3/4″ (19 mm) diameter hole and corner notchcomes withtemplate and instructions. The following guidelines are to be used when making a door using this hardwaremaximum height 102″ (2591 mm)maximum weight 194 lbs. Available in brushed and polished stainless steel finishes.

 

Aluminum Top Door Patch Fitting with 1NT304 Insert

Aluminum Top Door Patch Fitting with 1NT304 Insert

Aluminum Top Door Patch Fitting with 1NT304 Insert - The following guidelines are to be used when making a door using this hardwaremaximum height 102″ (2591mm)maximum weight 194 lbs (88kg)maximum width 42″ (1092mm)if the door exceeds any of these limitations, full door rails should be used. Glass fabrication required one 3/4 inch (19 millimeter) diameter hole and corner notch. Important notesthese fittings are not for use with laminated glass. Color aluminumfor 3/8″ or 1/2″ (10 or 12 mm) glassthe crl top door patch fitting includes the 1nt304 insert for use with our overhead concealed door closers that have a 9/16 inch (14 millimeter) square and 3/4 inch (19 millimeter) long spindle. Gaskets are supplied that allow this patch fitting to be used with either 3/8 or 1/2 inch (10 or 12 millimeter) glass. Finished covers are available in five standard finishes.

 

Polished Stainless Top Door Patch Fitting with Pivot Insert

Polished Stainless Top Door Patch Fitting with Pivot Insert

Polished Stainless Top Door Patch Fitting with Pivot Insert - Glass fabrication requiredone 3/4″ (19 mm) diameter hole and corner notchcomes withtemplate and instructions. Available in brushed and polished stainless steel finishes. Color polished stainlessfor 3/4″ (19 mm) glass304 alloy stainless steel covers2-3/4″ (70 mm) pivot setbackcrl top gate patch fittings are used with all three of our gate and door pivots. It fits in the upper corner of the gate’s glass panel, and requires a hole and cut-out in the glass. The following guidelines are to be used when making a door using this hardwaremaximum height 102″ (2591 mm)maximum weight 194 lbs. (88 kg)maximum width 42″ (1092 mm)if the door exceeds any of these limitations, full door rails should be used.

 

CRL Brushed Stainless Finish Curved Top Door Patch Fitting with INT303 Insert

CRL Brushed Stainless Finish Curved Top Door Patch Fitting with INT303 Insert

CRL Brushed Stainless Finish Curved Top Door Patch Fitting with INT303 Insert - Gaskets are supplied that allow this patch fitting to be used with either 3/8 or 1/2 inch (10 or 12 millimeter) glass. The crl curved top door patch fitting includes the 1nt303 insert for use with our crl9040wbp top walking beam pivot, 1nt401 surface mount top pivot, 1nt405 threaded top pivot, or other 19/32 inch (15 millimeter) diameter type pivots. .

 

CRL Aluminum Finish Ceiling Mounted Support Fin Bracket Patch Fitting

CRL Aluminum Finish Ceiling Mounted Support Fin Bracket Patch Fitting

CRL Aluminum Finish Ceiling Mounted Support Fin Bracket Patch Fitting - Capacity 10-12mm thick glass. For 3/8″ or 1/2″ (10 or 12 mm) glass. Use the excellent stainless steel. Finish chrome plated. Prefectly fit with glass door to create a spacious and bright modern life and work environment.

 

Polished Stainless Curved Top Door Patch Fitting with 1NT304 Insert

Polished Stainless Curved Top Door Patch Fitting with 1NT304 Insert

Polished Stainless Curved Top Door Patch Fitting with 1NT304 Insert - The following guidelines are to be used when making a door using this hardwaremaximum height 102″ (2591mm)maximum weight 194 lbs (88kg)maximum width 42″ (1092mm)if the door exceeds any of these limitations, full door rails should be used. Color polished stainless2-11/16″ (68 mm) pivot setbackfor 3/8″ or 1/2″ (10 or 12 mm) glassthe crl curved top door patch fitting includes the 1nt304 insert for use with our overhead concealed door closers that have a 9/16″ (14 mm) square and 3/4″ (19 mm) long spindle. Important notesthese fittings are not for use with laminated glass. Glass fabrication requiredone 3/4″ (19 mm) diameterhole and corner notchcomes withtemplate and instructionsimportant note door closer needs to be adjusted back 1/16″ (1. Gaskets are supplied that allow this patch fitting to be used with either 3/8″ or 1/2″ (10 or 12 mm) glass. 6 mm) to achieve 2-11/16″ (68 mm) pivot setback to work with this patch fitting.

 

CR LAURENCE PH20BPS CRL Polished Stainless Top Door Patch Fitting with 1NT304 Insert

C.R. LAURENCE PH20BPS CRL Polished Stainless Top Door Patch Fitting with 1NT304 Insert

C.R. LAURENCE PH20BPS CRL Polished Stainless Top Door Patch Fitting with 1NT304 Insert - Gaskets are supplied that allow this patch fitting to be used with either 3/8 or 1/2 inch (10 or 12 millimeter) glass. The crl top door patch fitting includes the 1nt304 insert for use with our overhead concealed door closers that have a 9/16 inch (14 millimeter) square and 3/4 inch (19 millimeter) long spindle. . C. R. Finished covers are available in five standard finishes. Laurence ph20bps crl polished stainless top door patch fitting with 1nt304 insert.

 

CR LAURENCE PH20APS CRL Polished Stainless Top Door Patch Fitting with 1NT303 Insert

C.R. LAURENCE PH20APS CRL Polished Stainless Top Door Patch Fitting with 1NT303 Insert

C.R. LAURENCE PH20APS CRL Polished Stainless Top Door Patch Fitting with 1NT303 Insert - Available in brushed stainless steel finish, it comes complete with instructions and a glass cut-out template. C. Crl top gate patch fittings are used with all three of our gate and door pivots. It fits in the upper corner of the gate”s glass panel, and requires a hole and cut-out in the glass. R. Laurence ph20aps crl polished stainless top door patch fitting with 1nt303 insert.

 

Polished Stainless Left Offset Top Door Patch Fitting

Polished Stainless Left Offset Top Door Patch Fitting

Polished Stainless Left Offset Top Door Patch Fitting - Color polished stainlessglass thickness 3/8 or 1/2 in (10 or 12 mm)hand lh/rhrfor 3/8″ or 1/2″ (10 or 12. Includes- high density cast body- cover plates (finish of your choice)- gasket for 3/8″ or 1/2″ (10 or 12. Allowing for a full 180 degree door swing, these fittings are available for right or left hand configurations, in your choice of brushed or polished stainless steel. 7 mm) glass- template and instructionsspecifications for use with- 0pf40 transom patch fittings- 1nt401 surface mounted top pivot- 1nt405 threaded top pivotglass fabrication requiredone 3/4″ (19 mm) diameterhole and corner notchcomes with template and instructions. It will also work with other offset patch fittings. 7 mm) glassallows for 180 degree door swingleft and right handed also works with crl 3/4″ (19 mm) offset arm bottom door rails with no alterationsthe crl top of door offset patch fitting is specifically designed to work with offset arm bottom door rails, with no alterations required.

 

Brushed Stainless Top Door Patch Fitting with 1NT303 Insert

Brushed Stainless Top Door Patch Fitting with 1NT303 Insert

Brushed Stainless Top Door Patch Fitting with 1NT303 Insert - Finished covers are available in four standard finishes. (80 kg)maximum width 43″ (1110 mm)if the door exceeds any of these limitations, full door rails should be used. Glass fabrication requiredone 3/4″ (19 mm) diameterhole and corner notchcomes withtemplate and instructionsimportant notesthese fittings are not for use with laminated glass. The following guidelines are to be used when making a door using this hardwaremaximum height 108″ (2744 mm)maximum weight 176 lbs. Color brushed stainless2-9/16″ (65 mm) pivot setbackhigh density cast bodyfor 3/8″ or 1/2″ (10 or 12 mm) glassthe crl top door patch fitting includes the 1nt303 insert for use with our crl9040wbp top walking beam pivot, 1nt401 surface mount top pivot, 1nt405 threaded top pivot, or other 19/32″ (15 mm) diameter type pivots. Gaskets are supplied that allow this patch fitting to be used with either 3/8″ or 1/2″ (10 or 12 mm) glass.

 

CRL Dark Bronze Adjustable European Top Door Patch Fitting by CR Laurence

CRL Dark Bronze Adjustable European Top Door Patch Fitting by CR Laurence

CRL Dark Bronze Adjustable European Top Door Patch Fitting by CR Laurence - Glass fabrication requiredone 3/4″ (19 mm) diameterhole and corner notchcomes withtemplate and instructionsimportant notesthese fittings are not for use with laminated glass. Finished covers are available in five standard finishes. Color dark bronzeadjustable pivot insert allows three degrees movement for proper door alignment2-9/16″ (65 mm) pivot setbackfor 3/8″ or 1/2″ (10 or 12 mm) glassthe crl adjustable top door patch fitting includes an adjustable pivot insert that allows for 3 degrees of movement for proper alignment of the door to the jamb when in the closed position. The following guidelines are to be used when making a door using this hardwaremaximum height 102″ (2591 mm)maximum weight 194 lbs. (88 kg)maximum width 42″ (1092 mm)if the door exceeds any of these limitations, full door rails should be used. For use with our crl9970 overhead concealed door closer. Gaskets are supplied that allow this patch fitting to be used with either 3/8″ or 1/2″ (10 or 12 mm) glass.

 

Polished Stainless Ceiling Mounted Support Fin Bracket Patch Fitting

Polished Stainless Ceiling Mounted Support Fin Bracket Patch Fitting

Polished Stainless Ceiling Mounted Support Fin Bracket Patch Fitting - . Glass fabrication requiredtwo 3/4″ (19 mm) diameter holescomes withtemplate and instructionsimportant notesnote these fitting are not for use with laminated glass. The support fin glass should be sized to approved design criteria(refer to gana or manufacturer’s manual). Color polished stainlessfor 3/8″ or 1/2″ (10 or 12 mm) glassthe crl ceiling mounted support fin bracket is used to secure glass support fins to the ceiling.

 

NHN Model TP-1 Glass Door Patch Fitting

NHN Model: TP-1 Glass Door Patch Fitting

NHN Model: TP-1 Glass Door Patch Fitting - Very easy to install. Top pivot for glass door.

 

Rixson PH328 Series 85 Lbs Center-Hung Right Hand 105 Degree Selective Hold-Open Floor Mounted Closer Body Only for Patch Fittings

Rixson PH328 Series 8.5 Lbs. Center-Hung Right Hand 105 Degree Selective Hold-Open Floor Mounted Closer Body Only for Patch Fittings

Rixson PH328 Series 8.5 Lbs. Center-Hung Right Hand 105 Degree Selective Hold-Open Floor Mounted Closer Body Only for Patch Fittings - . Handing right handtype 105 degree selective hold openphysically handicapped 8. 5 lbs. D. (147 kg) and 42″ (1066 mm) wide. A. D. This model is specifically designed to be used with the tapered spindle insert used for patch fittings. Note although a. Specified opening forces, they might not provide adequate spring power to control and close the door due to varying site conditions and door size. D. Important notesclosers set to comply with a. This closer is capable of supporting exterior or interior doors weighing up to 325 lbs. Opening force for compliance with ada accessibility requirementstapered spindle design intended for use with patch fittingsselective on or off hold-openthis rixson model 328 center-hung floor mounted door closer provides the best mechanical means of controlling a door. A. Optional accessories that may be needed are253000 floor closer cement case284720rh closer coveradditional finishes and accessories are available upon request for quotation. Specified opening forces might not provide adequate spring power to control and close the door due to varying site conditions and door size. A. Standard features include selective on or off hold-open, build-in positive dead stop, and separate independent valves for closing, latch and back check adjustments. Series door closers comply with a.

 

Polished Stainless Top or Bottom Patch Fitting - Less Insert

Polished Stainless Top or Bottom Patch Fitting – Less Insert

Polished Stainless Top or Bottom Patch Fitting – Less Insert - Glass fabrication requiredone corner notchincludeshigh density cast bodycover plates (finish of your choice)gaskets for 3/8 or 1/2 inch (10 or 12 millimeter)template and instructionsimportant notesthe following guidelines are to be used when making a door using this hardware. . Color polished stainlessfor use with top and bottom insertshigh density cast bodygaskets for use with 3/8″ or 1/2″ (10 or 12 mm) glassthis crl american t/b door patch (less insert) will allow you to use the same fitting for either top or bottom by simply installing the appropriate insert. Maximum height 102″ (2591 mm)maximum weight 194 lbs (88 kg)maximum width 42″ (1092 mm)if the door exceeds any of these limitations, full door rails should be used.

 

Brass Patch Fitting Replacement Cover Plate for PH40

Brass Patch Fitting Replacement Cover Plate for PH40

Brass Patch Fitting Replacement Cover Plate for PH40 - Color brassfor ph40 sidelite mounted transom patch fittingsthese crl replacement cover plates for commercial patch fittings are intended as replacements for damaged cover plates on existing installations that used ph40 sidelite mounted transom patch fittings. These plates also allow the finish to be changed when remodeling without removing the main patch body. Includes 1 set of two cover plates.

 

Black Bronze Anodized Patch Fitting Replacement Cover Plate for PH10 PH11 PH20 and PH21

Black Bronze Anodized Patch Fitting Replacement Cover Plate for PH10, PH11, PH20 and PH21

Black Bronze Anodized Patch Fitting Replacement Cover Plate for PH10, PH11, PH20 and PH21 - Color black bronzeused for ph10, ph11, ph20 and ph21 patch fittingsthese crl replacement cover plates for commercial patch fittings are intended as replacements for damaged cover plates on existing installations that have used ph10, ph11, ph20 and ph21 fittings. Includes 1 set of two cover plates. These plates also allow the finish to be changed when remodeling without removing the main patch body.

 

NHN Model PDC105 SSS - Hydraulic Self Closing Pivot Door Closer for Glass Door Patch Fitting Non-hold open No Digging Floor

NHN Model: PDC105 SSS – Hydraulic Self Closing Pivot Door Closer for Glass Door (Patch Fitting) (Non-hold open) No Digging Floor

NHN Model: PDC105 SSS – Hydraulic Self Closing Pivot Door Closer for Glass Door (Patch Fitting) (Non-hold open) No Digging Floor - Ambient temperature -4f + 122f degrees. Supplied non handed the nhn pdc100 provides optimum efficiency with quick and easy installation. Non hold open model suitable for a glass door 3/8-9/16inch thick, 30-493inch wide and a maximum weight of 220lbs. Finishes available as standard are satin and polished stainless steel. Simple final adjustments.

 

uxcell Metal L Shape Frameless Glass Door Clamp Mirror Clip Patch Fitting

uxcell Metal L Shape Frameless Glass Door Clamp Mirror Clip Patch Fitting

uxcell Metal L Shape Frameless Glass Door Clamp Mirror Clip Patch Fitting - Overall size 220 x 105 x 27mm / 866″ x 413″ x 1″(lwh). Main color silver tone. Material metal product name glass door clamp. Fit for glass thickness 10mm -12mm / 04″-047″. Package content 1 x glass door clamp weight 1231g.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.