19 Best Texas Pneumatic Tools in 2020

 

Texas Pneumatic Tools Inc 12 X 6 Air Hose Whip Assembly w 34 37 oz Lubricator Chicago Coupling 78-24 Swivel TX-8HW

Texas Pneumatic Tools, Inc. 1/2″ X 6′ Air Hose Whip Assembly w/ 3/4″, 3.7 oz. Lubricator, Chicago Coupling & 7/8″-24 Swivel TX-8HW

Texas Pneumatic Tools, Inc. 1/2″ X 6′ Air Hose Whip Assembly w/ 3/4″, 3.7 oz. Lubricator, Chicago Coupling & 7/8″-24 Swivel TX-8HW - Equipped with 7/8″-24 swivel on tool end. Use a hose whip with lubricator for safety and to save money, eliminate repairs and costly downtime. Crowfoot/chicago fitting on compressor end. 3/4″, 37 oz in line lubricator will flow up to 70 cfm at 90 psi. Made in usa.

 

Texas Pneumatic Tools Inc 3 Stroke 4 Bolt Chipping Hammer wQuick Change Retainer for Hex Shank Chisels TXCH3-4B-H

Texas Pneumatic Tools, Inc. 3″ Stroke, 4 Bolt Chipping Hammer w/Quick Change Retainer for Hex Shank Chisels TXCH3-4B-H

Texas Pneumatic Tools, Inc. 3″ Stroke, 4 Bolt Chipping Hammer w/Quick Change Retainer for Hex Shank Chisels TXCH3-4B-H - Supplied with 6′ hose whip, in line lubricator, chicago coupling, one flat chisel and one moil point chisel. 1,650 blows per minute, 3″ stroke, 1-1/8″ bore. Made in usa. 33-35 cfm of air consumed at 90 psi. Quick change retainer for hex shank chisels.

 

Texas Pneumatic Tools Inc 30 Lb JackhammerPaving Breaker w 1 Chuck TX30PB-1

Texas Pneumatic Tools, Inc. 30 Lb. Jackhammer/Paving Breaker w/ 1″ Chuck TX30PB-1

Texas Pneumatic Tools, Inc. 30 Lb. Jackhammer/Paving Breaker w/ 1″ Chuck TX30PB-1 - Made in usa. 1,550 blows per minute. 34 pound net weight, 22-1/2″ overall length, requires 49 cfm of air at 90 psi. Requires 1″ x 4-1/4″ shank chisels. We recommend the texas pneumatic tx9hw hose whip assembly for use with this tool for the correct fittings and appropriately sized in line lubricator.

 

Texas Pneumatic Tools Inc 2 Stroke 4 Bolt Chipping Hammer wOval Collar Retainer for Round Shank Chisels TXCH2-4B-RS

Texas Pneumatic Tools, Inc. 2″ Stroke, 4 Bolt Chipping Hammer w/Oval Collar Retainer for Round Shank Chisels TXCH2-4B-RS

Texas Pneumatic Tools, Inc. 2″ Stroke, 4 Bolt Chipping Hammer w/Oval Collar Retainer for Round Shank Chisels TXCH2-4B-RS - 2,100 blows per minute, 2″ stroke, 1-1/8″ bore. 32-34 cfm of air consumed at 90 psi. Supplied with 6′ hose whip, in line lubricator, chicago coupling, one flat chisel and one moil point chisel. Oval collar retainer for round shank chisels. Made in usa.

 

Texas Pneumatic Tools Inc 6 Diameter Venturi Air Mover wSteel Horn TX-6AM

Texas Pneumatic Tools, Inc. 6″ Diameter Venturi Air Mover w/Steel Horn TX-6AM

Texas Pneumatic Tools, Inc. 6″ Diameter Venturi Air Mover w/Steel Horn TX-6AM - Can be used as a blower or exhauster for ventilating hazardous areas or for cooling. Moves 3,698 cfm of air when run at 100 psi and requires 101 scfm from the compressor. No moving parts/minimal maintenance. Made in usa. Can operate on compressed air or steam.

 

Texas Pneumatic Tools Inc 3 Stroke 4 Bolt Chipping Hammer wOval Collar Retainer for Hex Shank Chisels TXCH3-4B-HS

Texas Pneumatic Tools, Inc. 3″ Stroke, 4 Bolt Chipping Hammer w/Oval Collar Retainer for Hex Shank Chisels TXCH3-4B-HS

Texas Pneumatic Tools, Inc. 3″ Stroke, 4 Bolt Chipping Hammer w/Oval Collar Retainer for Hex Shank Chisels TXCH3-4B-HS - 33-35 cfm of air consumed at 90 psi. Made in usa. 1,650 blows per minute, 3″ stroke, 1-1/8″ bore. Oval collar retainer for hex shank chisels. Supplied with 6′ hose whip, in line lubricator, chicago coupling, one flat chisel and one moil point chisel.

 

Texas Pneumatic Tools Inc 12 X 6 Air Hose Whip Assembly w 34 11 oz Lubricator Chicago Coupling 78-24 Swivel TX-14HW

Texas Pneumatic Tools, Inc. 1/2″ X 6′ Air Hose Whip Assembly w/ 3/4″, 11 oz. Lubricator, Chicago Coupling & 7/8″-24 Swivel TX-14HW

Texas Pneumatic Tools, Inc. 1/2″ X 6′ Air Hose Whip Assembly w/ 3/4″, 11 oz. Lubricator, Chicago Coupling & 7/8″-24 Swivel TX-14HW - Made in usa. Equipped with 7/8″-24 swivel on tool end. Crowfoot/chicago fitting on compressor end. Use a hose whip with lubricator for safety and to save money, eliminate repairs and costly downtime. 3/4″, 11oz in line lubricator will flow up to 70 cfm at 90 psi.

 

Texas Pneumatic Tools Inc 4 Stroke 4 Bolt Chipping Hammer wOval Collar Retainer for Round Shank Chisels TXCH4-4B-RS

Texas Pneumatic Tools, Inc. 4″ Stroke, 4 Bolt Chipping Hammer w/Oval Collar Retainer for Round Shank Chisels TXCH4-4B-RS

Texas Pneumatic Tools, Inc. 4″ Stroke, 4 Bolt Chipping Hammer w/Oval Collar Retainer for Round Shank Chisels TXCH4-4B-RS - Supplied with 6′ hose whip, in line lubricator, chicago coupling, one flat chisel and one moil point chisel. Made in usa. Oval collar retainer for round shank chisels. 34-36 cfm of air consumed at 90 psi. 1,375 blows per minute, 4″ stroke, 1-1/8″ bore.

 

Texas Pneumatic Tools Inc 30 Lb JackhammerPaving Breaker w 78 Chuck TX30PB-875

Texas Pneumatic Tools, Inc. 30 Lb. Jackhammer/Paving Breaker w/ 7/8″ Chuck TX30PB-.875

Texas Pneumatic Tools, Inc. 30 Lb. Jackhammer/Paving Breaker w/ 7/8″ Chuck TX30PB-.875 - Requires 7/8″ x 3-1/4″ shank chisels. 34 pound net weight, 22-1/2″ overall length, requires 49 cfm of air at 90 psi. Made in usa. We recommend the texas pneumatic tx9hw hose whip assembly for use with this tool for the correct fittings and appropriately sized in line lubricator. 1,550 blows per minute.

 

Texas Pneumatic Tools Inc 12 X 6 Air Hose Whip Assembly w 34 37 oz Lubricator Chicago Coupling 38 Male NPT End TX-5HW

Texas Pneumatic Tools, Inc. 1/2″ X 6′ Air Hose Whip Assembly w/ 3/4″, 3.7 oz. Lubricator, Chicago Coupling & 3/8″ Male NPT End TX-5HW

Texas Pneumatic Tools, Inc. 1/2″ X 6′ Air Hose Whip Assembly w/ 3/4″, 3.7 oz. Lubricator, Chicago Coupling & 3/8″ Male NPT End TX-5HW - Equipped with 3/8″ male npt fitting on tool end. 3/4″, 37 oz in line lubricator will flow up to 70 cfm at 90 psi. Crowfoot/chicago fitting on compressor end. Use a hose whip with lubricator for safety and to save money, eliminate repairs and costly downtime. Made in usa.

 

Texas Pneumatic Tools Inc 2 Stroke 4 Bolt Chipping Hammer wQuick Change Retainer for Round Shank Chisels TXCH2-4B

Texas Pneumatic Tools, Inc. 2″ Stroke, 4 Bolt Chipping Hammer w/Quick Change Retainer for Round Shank Chisels TXCH2-4B

Texas Pneumatic Tools, Inc. 2″ Stroke, 4 Bolt Chipping Hammer w/Quick Change Retainer for Round Shank Chisels TXCH2-4B - Quick change retainer for round shank chisels. Supplied with 6′ hose whip, in line lubricator, chicago coupling, one flat chisel and one moil point chisel. 32-34 cfm of air consumed at 90 psi. Made in usa. 2,100 blows per minute, 2″ stroke, 1-1/8″ bore.

 

Texas Pneumatic Tools Inc 15 Gallon 8 Outlet Tank Style Pneumatic Air Distribution Manifold TX2AMF

Texas Pneumatic Tools, Inc. 15 Gallon, 8 Outlet, Tank Style, Pneumatic Air Distribution Manifold TX2AMF

Texas Pneumatic Tools, Inc. 15 Gallon, 8 Outlet, Tank Style, Pneumatic Air Distribution Manifold TX2AMF - 15 gallon capacity with eight 3/4″ outlets, each with ball valve and chicago fitting. Asme certified and meets all osha requirements. Made in usa. Rated for a working pressure of 200 psi and tested to a pressure of 260 psi. 2″ inlet with 4 prong chicago coupling.

 

Texas Pneumatic Tools Inc 34 X 6 Air Hose Whip Assembly w 34 11 oz Lubricator Chicago Coupling 34 Male NPT End TX-12HW

Texas Pneumatic Tools, Inc. 3/4″ X 6′ Air Hose Whip Assembly w/ 3/4″, 11 oz. Lubricator, Chicago Coupling & 3/4″ Male NPT End TX-12HW

Texas Pneumatic Tools, Inc. 3/4″ X 6′ Air Hose Whip Assembly w/ 3/4″, 11 oz. Lubricator, Chicago Coupling & 3/4″ Male NPT End TX-12HW - Crowfoot/chicago fitting on compressor end. Made in usa. Use a hose whip with lubricator for safety and to save money, eliminate repairs and costly downtime. Equipped with 3/4″ male npt fitting on tool end. 3/4″, 11oz in line lubricator will flow up to 70 cfm at 90 psi.

 

Texas Pneumatic Tools 29 lb Rock Drill 78 x 4-14 Chuck

Texas Pneumatic Tools 29 lb Rock Drill (7/8″ x 4-1/4″ Chuck)

Texas Pneumatic Tools 29 lb Rock Drill (7/8″ x 4-1/4″ Chuck) - Delivers 2,700 blows per minute with a bore of 24375″ and a stroke of 14375″. Supplied with a texas pneumatic tx-10hw-cf hose whip and lubricator assembly. Requires 73 cfm of air at 90 psi. 7/8″ x 4-1/4″ chuck (be sure to order the tool that matches your existing inventory of bits). Made in usa.

 

Texas Pneumatic Tools Inc 12 X 6 Air Hose Whip Assembly w 34 11 oz Lubricator Chicago Coupling on Each End TX-10HW

Texas Pneumatic Tools, Inc. 1/2″ X 6′ Air Hose Whip Assembly w/ 3/4″, 11 oz. Lubricator & Chicago Coupling on Each End TX-10HW

Texas Pneumatic Tools, Inc. 1/2″ X 6′ Air Hose Whip Assembly w/ 3/4″, 11 oz. Lubricator & Chicago Coupling on Each End TX-10HW - Made in usa. Use a hose whip with lubricator for safety and to save money, eliminate repairs and costly downtime. 3/4″, 11oz in line lubricator will flow up to 70 cfm at 90 psi. Equipped with crowfoot/chicago coupling tool end. Crowfoot/chicago fitting on compressor end.

 

Texas Pneumatic Tools 800 CFM Compressed Air Moisture Separating System

Texas Pneumatic Tools 800 CFM Compressed Air Moisture Separating System

Texas Pneumatic Tools 800 CFM Compressed Air Moisture Separating System - 200 psi asme code tank featuring multiple outlets with auto exhaust ball valves & safety lock cables. Eliminates moisture from the compressor with four levels of separation including a deliquescent desiccant for added drying. Made in usa. All components from stainless, aluminum or galvanized steel. Processes compressed air at a rate of up to 800 cfm.

 

Texas Pneumatic Tools Inc 4 Stroke 4 Bolt Chipping Hammer wQuick Change Retainer for Hex Shank Chisels TXCH4-4B-H

Texas Pneumatic Tools, Inc. 4″ Stroke, 4 Bolt Chipping Hammer w/Quick Change Retainer for Hex Shank Chisels TXCH4-4B-H

Texas Pneumatic Tools, Inc. 4″ Stroke, 4 Bolt Chipping Hammer w/Quick Change Retainer for Hex Shank Chisels TXCH4-4B-H - Quick change retainer for hex shank chisels. 1,375 blows per minute, 4″ stroke, 1-1/8″ bore. Supplied with 6′ hose whip, in line lubricator, chicago coupling, one flat chisel and one moil point chisel. Made in usa. 34-36 cfm of air consumed at 90 psi.

 

Texas Pneumatic Tools Inc Triple Piston Pneumatic Scaler T3

Texas Pneumatic Tools, Inc. Triple Piston Pneumatic Scaler T3

Texas Pneumatic Tools, Inc. Triple Piston Pneumatic Scaler T3 - They feature a rugged steel body, a lever operated throttle handle and are proudly made in the usa. A variety of replacement pistons are available. Texas pneumatic piston type scalers are an excellent choice for removing rust, paint or concrete from steel surfaces and for roughing concrete surfaces.

 

Texas Pneumatic Tools Inc 8 Stroke Rivet Buster for 866 Jumbo Chisels TX133-8RB

Texas Pneumatic Tools, Inc. 8″ Stroke Rivet Buster for .866″ Jumbo Chisels TX133-8RB

Texas Pneumatic Tools, Inc. 8″ Stroke Rivet Buster for .866″ Jumbo Chisels TX133-8RB - This tool represents one of the best values on the market. Every tool is supplied with a 6′ hose whip w/swivel and strain relief, in line filter/oiler, chicago/crowfoot air coupling, flat chisel and moil point chisel so the tool is ready to work as shipped right out of the box. In addition, the tool is shipped with a tx133kit repair kit that includes the components to replace the common wear parts in the chuck twice. Texas pneumatic rivet busters are made entirely in the usa. The all steel throttle valve is precisely machined to a clearance measured in tenths of thousands of an inch.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.