20 Best Ball Bearing Rollers

 

Prime-Line Products G 3157 Sliding Window Roller 58 Ball BearingPack of 2

Prime-Line Products G 3157 Sliding Window Roller, 5/8 Ball Bearing,(Pack of 2)

Prime-Line Products G 3157 Sliding Window Roller, 5/8 Ball Bearing,(Pack of 2) - You may also need these parts g-3045, g-3058 and g-3059. This is a sliding window 5/8 diameter flat edge steel ball bearing roller built in axle fits acorn windows.

 

Adjustable Pedestal Feed Roller Support Portamate PM 5080 with 11 ¼ Ball Bearing Steel Roller

Adjustable Pedestal Feed Roller Support Portamate PM 5080 with 11 ¼” Ball Bearing Steel Roller

Adjustable Pedestal Feed Roller Support Portamate PM 5080 with 11 ¼” Ball Bearing Steel Roller - Strong and stable, 132 lb capacity means it can hold almost any material powder coat finish and non-slip feet for extra stability. Folds away for easy storage, the small footprint when folded makes storage a breeze. Fully adjustable, adjusts from 27″ to 4375″ in height, making it ideal for table saws, band saws, and similar. 11 ¼” polished steel roller, allows for smooth feeding of material. The perfect portable support, this exceptional roller support will find use all over your shop for feeding material and similar.

 

Prime-Line Products D 1950 Sliding Door Roller Assembly with 1-12-Inch Steel Ball Bearing Gold Zinc 1-Pack

Prime-Line Products D 1950 Sliding Door Roller Assembly with 1-1/2-Inch Steel Ball Bearing, Gold Zinc, 1-Pack

Prime-Line Products D 1950 Sliding Door Roller Assembly with 1-1/2-Inch Steel Ball Bearing, Gold Zinc, 1-Pack - . 1-1/2 steel ball bearing roller assembly adjustable steel housing gold zinc plated used on northrop doors.

 

CR LAURENCE D679 CRL Masteroll Ball Bearing Roller

C.R. LAURENCE D679 CRL Masteroll Ball Bearing Roller

C.R. LAURENCE D679 CRL Masteroll Ball Bearing Roller - 2 mm) diameter this crl masteroll ball bearing roller is a nylon roller designed to screw into the slots on a top, front or rear hanger, and is part of the masteroll track system. Complete with screw stud 7/8″ (22. 2 mm) minimum order 1 each. Diameter 7/8 in (22.

 

Adjustable Roller Table Stand HTC HRT-10 Super Duty Conveyor Feed Stand With 5 Ball Bearing Rollers

Adjustable Roller Table Stand HTC HRT-10 Super Duty Conveyor Feed Stand With 5 Ball Bearing Rollers

Adjustable Roller Table Stand HTC HRT-10 Super Duty Conveyor Feed Stand With 5 Ball Bearing Rollers - Safe and stable- non-skid leveling feet and a 500lb capacity means it will stand firm for even the toughest jobs wedge shaped inner legs tighten under load for added stability. Built to last, built with quality materials by htc. Perfect for moving material through cutting tools, smoothly move stock through your bandsaw, planer, table saw, and more. Adjustable height for incredible versatility, adjusts from 265″ to 43″ high, making it ideal for almost any situation that requires feeding material. Galvanized steel ball bearing rollers, for smooth, consistent feeding of material.

 

Prime-Line Products D 1534 Sliding Door Roller Assembly with 1-12-Inch Steel Ball Bearing

Prime-Line Products D 1534 Sliding Door Roller Assembly with 1-1/2-Inch Steel Ball Bearing

Prime-Line Products D 1534 Sliding Door Roller Assembly with 1-1/2-Inch Steel Ball Bearing - This type of roller assembly is used by overseas and other glass door manufacturers. This sliding door roller assembly is constructed from steel. It features a 1-1/2 in. Ball bearing roller with an adjustable steel housing.

 

CR LAURENCE D1960 CRL 1-12 Steel Ball Bearing Sliding Glass Door Roller with 2532 Wide Housing

C.R. LAURENCE D1960 CRL 1-1/2″ Steel Ball Bearing Sliding Glass Door Roller with 25/32″ Wide Housing

C.R. LAURENCE D1960 CRL 1-1/2″ Steel Ball Bearing Sliding Glass Door Roller with 25/32″ Wide Housing - Minimum order 1 package additional product information one roller per package. Adjustable extruded aluminum housing this crl glass door roller has an adjustable extruded aluminum housing which is 25/32 inch (19. This roller assembly is used on several door manufacturers. The ball bearing roller assembly has a diameter of 1-1/2 inches (38. 1 millimeter). 9 millimeter) tall. 8 millimeter) wide and 1-3/8 inches (34.

 

Prime-Line Products D 1500 Sliding Door Roller 1-Inch Steel Ball Bearing with 14-Inch Hole Pack of 2

Prime-Line Products D 1500 Sliding Door Roller, 1-Inch Steel Ball Bearing with 1/4-Inch Hole, Pack of 2

Prime-Line Products D 1500 Sliding Door Roller, 1-Inch Steel Ball Bearing with 1/4-Inch Hole, Pack of 2 - Carriage bolt with nut. By 3/4 in. It includes a 1/4 in. It features a hardened steel inner race with a diameter of 1/4 in. This steel ball bearing roller features a center grooved design.

 

Set of 6 TruePower 1 Roller Ball Transfer Bearings

Set of 6 TruePower 1″ Roller Ball Transfer Bearings

Set of 6 TruePower 1″ Roller Ball Transfer Bearings - 30mm high x 43mm wide x 69mm long(base mounting bracket). Rollers have 1″ hardened steel balls rotating on 1/8″ internal bearings. Excel where shop materials are pushed and turned in all directions. For use bearing side up only, not for use as castor wheels. 360º universal transfer bearings, load rating is 110 pounds each.

 

Prime-Line Products N 7449 Door Roller Assembly 78 in Convex Plastic Tires Steel Bracket Ball Bearings

Prime-Line Products N 7449 Door Roller Assembly, 7/8 in., Convex, Plastic Tires, Steel Bracket & Ball Bearings

Prime-Line Products N 7449 Door Roller Assembly, 7/8 in., Convex, Plastic Tires, Steel Bracket & Ball Bearings - 7/8 in outside diameter wheels. Comes in a pack of 2. Steel constructed bracket. Nylon ball bearing rollers. Convex edge wheels (round edge). Used as a top roller assembly on pocket door and by-pass closet door systems. Constructed 4 of plastic wheels with steel ball bearings, assembled to a steel bracket. Can be used on bypass and pocket doors.

 

Prime-Line Products D 1991 Patio Door Tandem Roller 1-14-Inch Steel Ball Bearing Low Carriage

Prime-Line Products D 1991 Patio Door Tandem Roller, 1-1/4-Inch Steel Ball Bearing, Low Carriage

Prime-Line Products D 1991 Patio Door Tandem Roller, 1-1/4-Inch Steel Ball Bearing, Low Carriage - This sliding door tandem roller assembly is constructed from steel. . It features a ball bearing roller and is attached to an adjustable steel housing assembly. This roller has a diameter of 1-1/4 in.

 

Slide-Co 164663 Pocket Door Roller and Bracket Nylon Ball Bearing WheelsPack of 2

Slide-Co 164663 Pocket Door Roller and Bracket, Nylon Ball Bearing Wheels,(Pack of 2)

Slide-Co 164663 Pocket Door Roller and Bracket, Nylon Ball Bearing Wheels,(Pack of 2) - They come affixed to a steel four wheel carrier bracket. This pocket door roller can be used on both bypass and pocket doors. It features four 7/8 in. . Diameter nylon ball bearing rollers.

 

Slide-Co 112142 Screen Door Roller Assembly with 1-Inch Steel Ball Bearing Roller PeachtreePack of 2

Slide-Co 112142 Screen Door Roller Assembly with 1-Inch Steel Ball Bearing Roller, Peachtree,(Pack of 2)

Slide-Co 112142 Screen Door Roller Assembly with 1-Inch Steel Ball Bearing Roller, Peachtree,(Pack of 2) - It comes affixed to an adjustable steel housing. This style roller is used by peachtree brand doors. This sliding screen door roller is constructed from steel and features a center groove.

 

Prime-Line Products D 1917 Sliding Door Tandem Roller Assembly 1-14-Inch Steel Ball Bearing

Prime-Line Products D 1917 Sliding Door Tandem Roller Assembly, 1-1/4-Inch Steel Ball Bearing

Prime-Line Products D 1917 Sliding Door Tandem Roller Assembly, 1-1/4-Inch Steel Ball Bearing - This roller has a diameter of 1-1/4 in. This sliding door tandem roller assembly is constructed from steel. . It features a ball bearing roller and is attached to an adjustable steel housing assembly.

 

Prime-Line Products B 739 Spring Tension Assembly with 1-Inch Steel Ball Bearing RollerPack of 2

Prime-Line Products B 739 Spring Tension Assembly with 1-Inch Steel Ball Bearing Roller,(Pack of 2)

Prime-Line Products B 739 Spring Tension Assembly with 1-Inch Steel Ball Bearing Roller,(Pack of 2) - It features a 1 in. Ball bearing center grooved wheel. This type of tension roller assembly is heat-treated and has an inverted high-tension steel spring. This spring tension roller assembly is constructed from steel.

 

Prime-Line Products B 513 Screen Door Tension Spring with 1-Inch Steel Ball Bearing RollerPack of 2

Prime-Line Products B 513 Screen Door Tension Spring with 1-Inch Steel Ball Bearing Roller,(Pack of 2)

Prime-Line Products B 513 Screen Door Tension Spring with 1-Inch Steel Ball Bearing Roller,(Pack of 2) - Several glass door manufacturers use this type of tension spring. This screen door tension spring is constructed from steel. It features an adjustable 1 in. Ball bearing center groove wheel and is heat-treated.

 

Slide-Co 13808-N Sliding Door Tandem Roller Assembly 1-14-Inch Nylon Ball Bearing

Slide-Co 13808-N Sliding Door Tandem Roller Assembly, 1-1/4-Inch Nylon Ball Bearing

Slide-Co 13808-N Sliding Door Tandem Roller Assembly, 1-1/4-Inch Nylon Ball Bearing - Side adjust design allows for use on wood or vinyl styled doors. Comes finished in a gold zinc plating. Twin nylon ball bearing rollers are housed in an adjustable steel assembly that helps align your door to the jamb.

 

Shower Door 78 Diameter Ball Bearing Roller Assembly for Sliding Shower Doors

Shower Door 7/8″ Diameter Ball Bearing Roller Assembly for Sliding Shower Doors

Shower Door 7/8″ Diameter Ball Bearing Roller Assembly for Sliding Shower Doors - Shower door 7/8″ diameter ball bearing single roller assembly for sliding shower doors. Fits glass from 1/8″ to 1/4″ thick. Roller width 1/4″ material nylon. Roller diameter 7/8″. One roller assembly per package. . Note requires hole 1/2″ diameter for installation. Spring activated roller for easy installation. This sliding shower door roller assembly has a ball bearings nylon roller for easy and smooth door opening. Requires hole 1/2″ diameter.

 

Prime-Line Products D 1795 Sliding Door Roller 1-18-Inch Steel Ball Bearing 2-Pack

Prime-Line Products D 1795 Sliding Door Roller, 1-1/8-Inch Steel Ball Bearing, 2-Pack

Prime-Line Products D 1795 Sliding Door Roller, 1-1/8-Inch Steel Ball Bearing, 2-Pack - It includes assorted axles to fit various installations. This ball bearing roller is made from steel and comes in a gold zinc plated finish. This style roller fits many different patio door roller assemblies. .

 

2-pack Sliding Door Assembly 1-14 Steel Ball Bearing Rollers Side Adjust

2-pack Sliding Door Assembly, 1-1/4″ Steel Ball Bearing Rollers. Side Adjust

2-pack Sliding Door Assembly, 1-1/4″ Steel Ball Bearing Rollers. Side Adjust - . Product specifications roller diameter 1-1/4″ roller width 5/16″ housing width 11/16″ housing height 1-3/16″ fully greased during assembly replaces crl/primeline d1607, slide-co #13808-s, hds #847510 package contains two (2) tandem roller assemblies installation hardware is not included. It has an side-adjustable steel housing with two 1-1/4″ steel ball bearing rollers. This high-quality sliding door tandem roller assembly can be used on many sliding wood patio doors from manufacturers such as pella, andersen, weathershield, crestline, caradco, peachtree, and many more. The screw holes on the housing are 5-3/4″ on center.