20 Best Door Springs in 2020

 

Ideal Security SK7155P2 SK7155 Extension Spring Kit 2-Pack Of Garage Door Springs Safety Cables Two Safety 140 lbs Blue

Ideal Security SK7155P2 SK7155 Extension Spring Kit 2-Pack Of Garage Door Springs & Safety Cables, Two Safety, 140 lbs Blue

Ideal Security SK7155P2 SK7155 Extension Spring Kit 2-Pack Of Garage Door Springs & Safety Cables, Two Safety, 140 lbs Blue - Package includes 2 springs and 2 safety cables. Enamel coated steel springs are tested to be durable and long-lasting rated for 12, 000 cycles (a cycle is 1 open and 1 close). Before buying watch our how-to videos to be sure you’ve selected the right springs and are comfortable installing them yourself. Garage door springs are color-coded for easy identification see our easy to use selection guide for help choosing the right springs. All our springs are for standard 7′ high doors 25 inches relaxed, 67 inches when fully stretched.

 

Pair of 250 X 1 34 X 31 - 42 Garage Door Torsion Springs with Winding Bars 34

Pair of 250 X 1 3/4″ X 31″ – 42″ Garage Door Torsion Springs with Winding Bars (34″)

Pair of 250 X 1 3/4″ X 31″ – 42″ Garage Door Torsion Springs with Winding Bars (34″) - Professional installation is recommended. All tension must be released from springs before any work is performed. Warning torsion springs, extension springs, and related door hardware can cause serious injury or death if not handled and installed properly. Extension and torsion springs, along with attached hardware, are under extreme tension at all times. Read and understand all instructions before you begin work. Do not attempt to install springs or hardware yourself unless you have the proper tools, reasonable mechanical aptitude and experience, and upper arm strength.

 

Pack of 2 Oil-Rubbed Bronze 4 X 4 with 58 Radius Spring Door Hinges

(Pack of 2) Oil-Rubbed Bronze 4 X 4 with 5/8 Radius Spring Door Hinges

(Pack of 2) Oil-Rubbed Bronze 4 X 4 with 5/8 Radius Spring Door Hinges - Two 4″ x 4″ (5/8″ radius corner) exterior door spring hinge in oil-rubbed bronze 10r finish. This full mortise single acting spring hinge is recommended for use where automatic self closing of a door is required. Spring hinges are fully assembled and include all necessary screws for application. This three knuckle hinge is adjustable and the spring tension can be increased or decreased by using the included adjusting tool.

 

Garage Door Extension Spring for 7 High Door 120 Pounds 25 42 120 Coded Green  Pair

Garage Door Extension Spring for 7′ High Door, 120 Pounds 25 42 120 Coded Green ( Pair )

Garage Door Extension Spring for 7′ High Door, 120 Pounds 25 42 120 Coded Green ( Pair ) - Heavy duty extension spring 3″ pulley and safety cable complete garage door set keep your garage door running smooth and safe with new pulleys and safety cables. Extension spring for 7′ high door, 120 pounds 120# extension springs, green springs 25-42-120 extension springs can be used on any door that weighs around 120 lbs. Double looped ends 25″ relaxed, 42″ stretch, rated 120 pounds per set dasma color coded green. Pair restraint cable, 3/32″ 7×7 120″ two ———– heavy duty 3″ pulleys two ———– 3″ clevis pulleys one ———– pair safety cables two ———– s-hook, 1/4″ x 2-1/2″ two ———– cable adjustment clip 200 lbs. Load capacity and rated for 10,000 cycles maximum cable diameter 5/32″ 3/8″ bore.

 

Garage Door Torsion Springs 175Pair with Non-Slip Winding Bars Coated Torsion Springs with a Minimum of 10000 Cycles 0207X175X26

Garage Door Torsion Springs 1.75”(Pair) with Non-Slip Winding Bars, Coated Torsion Springs with a Minimum of 10,000 Cycles (0.207X1.75”X26”)

Garage Door Torsion Springs 1.75”(Pair) with Non-Slip Winding Bars, Coated Torsion Springs with a Minimum of 10,000 Cycles (0.207X1.75”X26”) - Easy to installwe also offer a pair of unique non-slip winding bars,they will help install new or replace old, rusty springs quickly (professional installation recommended). High quality productmade of heat treated steel coils with aluminum cones to make sure they are extremely heavy dutysurface coated black for smoother, cleaner operation and also corrosion resistant and oil tempered for longer life. Dimension207″ wire size x 175″ inside dimension x 26″ lengthimportantplease purchase after confirming that the outer diameter,wire diameter and length are totally the same as the original product. Service lifefor use on doors 7′ or 8′ high doors with 4″ standard lift drums engineered for maximum application range minimum 10,000 cycles, at +/- 75 lbs of target door weight. Replace broken springs:use this pair of high quality garage door torsion springs to replace old broken garage door springs it includes stationary and winding cones.

 

2 Pack French Door Refrigerator Spring For Samsung DA81-01345B Compatible With Models RF267AFWP RF267HERS RF268ABBP RF268ABPN RF268ABRS RF268ABWP RF26VABWP RF26XAEBP RF26XAERS RF26XAEWP

2 Pack French Door Refrigerator Spring For Samsung DA81-01345B Compatible With Models RF267AFWP RF267HERS RF268ABBP RF268ABPN RF268ABRS RF268ABWP RF26VABWP RF26XAEBP RF26XAERS RF26XAEWP

2 Pack French Door Refrigerator Spring For Samsung DA81-01345B Compatible With Models RF267AFWP RF267HERS RF268ABBP RF268ABPN RF268ABRS RF268ABWP RF26VABWP RF26XAEBP RF26XAERS RF26XAEWP - Fits samsung refrigerator part # da81-01345b. Fits with various samsung brand models. Compatible models rf267afwp, rf267hers, rf268abbp, rf268abpn, rf268abrs, rf268abwp, rf26vabwp, rf26xaebp, rf26xaers, rf26xaewp, rf4267habp, rf4267hars, rf4267hawp, rf4287aars, rf4287habp, rf4287hapn, rf4287hars, rf4287hawp, rf4289hars, rf4289hbrs, rfg237aabp, rfg237aapn, rfg237aars, rfg237aawp, rfg237acrs, rfg238aabp, rfg238aapn, rfg238aars, rfg238aawp, rfg28mesl, rfg293habp, rfg293hapn, rfg293hars, rfg293hawp, rfg295aabp, rfg295aapn, rfg295aars, rfg295aawp. Compatible models rfg296hdpn, rfg296hdbp, rfg296hdrs, rfg296hdwp, rfg297aabp, rfg297aapn, rfg297aars, rfg297aawp, rfg297acbp, rfg297acrs, rfg297acwp, rfg297hdbp, rfg297hdpn, rfg297hdrs, rfg297hdwp, rfg298aabp, rfg298aapn, rfg298aars, rfg298aawp, rfg298hdbp, rfg298hdpn, rfg298hdrs, rfg298hdwp, rfg299aars, rfg29phdbp, rfg29phdrs, rfg29phdwp, rfg29thdrs,rf266, rf197acpn/xaa. Quality ensurance by the third party factory, tested before shipping.

 

Garage Door Plunger Bumper Spring 15

Garage Door Plunger Bumper Spring, 15″

Garage Door Plunger Bumper Spring, 15″ - Reliable quality, if there is any quality problem, please feel free to contact us refund or replacement for any quality problem. Quick and easy to install, first, mark where the stopper will go drill a hole unscrew the stoppers bottom to find the screw and drill a hole into the marked spot last, screw the base mount to the wall and attached the door stopper and voila, the door stop is ready for action. Noise-cancellation design, our spring door stops keep the house peaceful, bringing you more comfort. Prevents wall marks & protects door, this oil rubbed brass spring door stop with plastic bumper will keep your wall and door protected. Tough durable design, our heavy duty oil rubbed brass spring door stops are made of steel, and come individually wrapped to protect against any scratches.

 

2 Pack Rok Hardware 3-18 Flexi Spring Heavy Duty Wall Door Stop Bumper Oil-Rubbed Bronze

2 Pack Rok Hardware 3-1/8″ Flexi Spring Heavy Duty Wall Door Stop Bumper Oil-Rubbed Bronze

2 Pack Rok Hardware 3-1/8″ Flexi Spring Heavy Duty Wall Door Stop Bumper Oil-Rubbed Bronze - Can be screwed into baseboard or door. Plastic bumper tip prevents wall marks and protects door. Easy to install. Length 3-1/8″ , width 15/16″ , material metal. Rok brand is sold exclusively by rok hardware when you purchase a rok brand product, your satisfaction is guaranteed the rok name is a registered trademark of rok, inc.

 

Ultra 68405 Spring Door Closer Butterfly Spring Pack Of 2

Ultra 68405 Spring Door Closer, Butterfly Spring, Pack Of 2

Ultra 68405 Spring Door Closer, Butterfly Spring, Pack Of 2 - Nice chrome finish, keeps door closed, ideal for closet doors, kitchen cabinet doors, bedroom closet doors, bathroom closet doors, pantry doors etc,. Pack of 2. Long-lasting construction includes vinyl sleeves on wing prevents door from being scratched. Spring closer turns lightweight interior doors into self-closing doors. Installation close door, pull hinge pin up enough to put spring on pin with tension.

 

154430601 Frigidaire Dishwasher Door Spring

154430601 Frigidaire Dishwasher Door Spring

154430601 Frigidaire Dishwasher Door Spring - Genuine original equipment manufacturer (oem) part. Use caution when installing the door spring because the spring is under tension and could snap. This is a manufacturer substitution part may differ in appearance but is a functional equivalent to prior parts including 154414001,154365701. This door spring (part number 154430601) is for dishwashers. This part is compatible with models including gdb755rjd0,gdb755rjd1,fdb989rcs0,gdb755rjd2,58716074201,58716074200,fgbd2451kw0,gdb754rcb0,fgbd2451kw1,fdb989rcc0,gldb954bb0,gdb754rcs0,gldb954bb1,gldb656jb0,gldb656jb1,gldb958as0,gldb958as1,gldb958as2,gldb656js1,fdb635rfs5,fdb635rfs6,fdb857rjb1,fdb857rjb0,gldb656js0,fdb989rcb0,fdb780rcq0,fdbb944cs0,gpdb698jc1,gpdb698jc0,ngs5712aq0,fdb989rcq0,58714309200,58714309201,58716073201,ngs5712aq1,fdbb944cc0,fdb635rfr5,fdb635rfr6,gldb656jt0,gldb656jt1.

 

Cauldham 2 Pack Heavy-Duty 3-12 Self-Closing Spring Door Hinge with 58 Radius Corners UL Listed - Satin Nickel

Cauldham (2 Pack) Heavy-Duty 3-1/2″ Self-Closing Spring Door Hinge with 5/8″ Radius Corners, UL Listed – Satin Nickel

Cauldham (2 Pack) Heavy-Duty 3-1/2″ Self-Closing Spring Door Hinge with 5/8″ Radius Corners, UL Listed – Satin Nickel - Top quality solid and premium-weight, these heavy-duty spring hinges are constructed from top-quality steel surfaces are hand-crafted with extreme attention to all details for a truly best-in-class finish tough enough to hold solid-core, fiberglass, wood, metal, interior, exterior, residential & commercial doors. Self closing with easily adjustable closing power, these hinges are ideal for any type of door interior or exterior, solid or hollow, light, medium or heavy weight, wood, fiberglass and metal doors these are suitable for residential and commercial use (check any local building codes as needed). Ul listed each hinge set is ul listed, meeting the requirements for ul’s published and nationally recognized standards for safety, in compliance with current codes spring hinges are approved for use on fire-rated doors and meet ansi/bhma standards. Use on any door each hinge measures 3-1/2 inches (top to bottom) by 3-1/2 inches (wide) with 5/8″ radius rounded corners no 9, 1″ wood mounting screws are included per hinge for fast and easy installation a tension adjustment tool and instructions are also included for maximum versatility, use a single or multiple spring hinges on each door (along with one or more standard hinges as needed), depending on the door weight and the spring tension desired.

 

National Hardware N176-271 77BC Door Spring in Zinc plated

National Hardware N176-271 77BC Door Spring in Zinc plated

National Hardware N176-271 77BC Door Spring in Zinc plated - Looped ends for easy installation. Authorized replacement for stanley hardware stock #n176-271. Designed for doors and lightweight gates. Four diameter sizes for various applications. Steel wire spring.

 

Pair of 234 X 2 X 24 - 38 Garage Door Torsion Springs with Winding Bars 29

Pair of 234 X 2″ X 24″ – 38″ Garage Door Torsion Springs with Winding Bars (29)

Pair of 234 X 2″ X 24″ – 38″ Garage Door Torsion Springs with Winding Bars (29) - Professional installation is recommended. All tension must be released from springs before any work is performed. Extension and torsion springs, along with attached hardware, are under extreme tension at all times. Do not attempt to install springs or hardware yourself unless you have the proper tools, reasonable mechanical aptitude and experience, and upper arm strength. Warning torsion springs, extension springs, and related door hardware can cause serious injury or death if not handled and installed properly. Read and understand all instructions before you begin work.

 

Pair of 8 Garage Door Cable For Torsion Springs by National

Pair of 8′ Garage Door Cable For Torsion Springs by National

Pair of 8′ Garage Door Cable For Torsion Springs by National - It features a galvanized finish and is one eighth inch thick for strength and durability. This cable is for doors with torsion springs. This is a replacement lift cable for standard, eight-feet high, wood or metal garage doors up to sixteen feet wide.

 

Garage Door Torsion Springs 2 Pair with Non-Slip Winding Bars Coated Torsion Springs with a Minimum of 10000 Cycles 0207X2X22

Garage Door Torsion Springs 2” (Pair) with Non-Slip Winding Bars, Coated Torsion Springs with a Minimum of 10,000 Cycles (0.207X2”X22”)

Garage Door Torsion Springs 2” (Pair) with Non-Slip Winding Bars, Coated Torsion Springs with a Minimum of 10,000 Cycles (0.207X2”X22”) - Service lifefor use on doors 7′ or 8′ high doors with 4″ standard lift drums engineered for maximum application range minimum 10,000 cycles, at +/- 75 lbs of target door weight. High quality productmade of heat treated steel coils with aluminum cones to make sure they are extremely heavy dutysurface coated black for smoother, cleaner operation and also corrosion resistant and oil tempered for longer life. Replace broken springs:use this pair of high quality garage door torsion springs to replace old broken garage door springs it includes stationary and winding cones. Dimension207″ wire size x 2″ inside dimension x 22″ lengthimportantplease purchase after confirming that the outer diameter,wire diameter and length are totally the same as the original product. Easy to installwe also offer a pair of unique non-slip winding bars,they will help install new or replace old, rusty springs quickly (professional installation recommended).

 

Wayne Dalton TorqueMaster 1 or TorqueMaster TorqueMaster Replacement Springs - TorqueMaster TorqueMaster Plus - Door Height 7 Foot - Spring Type Double Spring - Door Weight 120-129

Wayne Dalton (TorqueMaster 1 or TorqueMaster+) TorqueMaster Replacement Springs – TorqueMaster: TorqueMaster Plus – Door Height: 7 Foot – Spring Type: Double Spring – Door Weight: 120-129

Wayne Dalton (TorqueMaster 1 or TorqueMaster+) TorqueMaster Replacement Springs – TorqueMaster: TorqueMaster Plus – Door Height: 7 Foot – Spring Type: Double Spring – Door Weight: 120-129 - Typically tm+ springs are found on doors manufactured after february 2007. Wayne dalton torquemaster replacement springs(torquemaster 1 or torquemaster+)these springs are genuine wayne dalton replacement springs for torquemaster+ (plus) system or torquemaster one. Please read how to identify torquemaster plus vs. Includes the replacement spring and plastic sleeve, the metal torquemaster tube is not included the springs are sold by door weight (pounds), door height (feet), and the amount of springs on your door ( single or pair). Torquemaster one torquemaster plus spring winding end easily identified by its hexagon shaped end. You’ll need to make your selections from the drop down boxes given.

 

Prime-Line GD 52238 Torsion Spring Winding Rods - The Only Tools Recommended for Adjusting or Replacing Garage Door Tension Springs - 12 Diameter x 16 Long Round Steel Rods Pack of 2

Prime-Line GD 52238 Torsion Spring Winding Rods – The Only Tools Recommended for Adjusting or Replacing Garage Door Tension Springs – 1/2″ Diameter x 16″ Long Round Steel Rods (Pack of 2)

Prime-Line GD 52238 Torsion Spring Winding Rods – The Only Tools Recommended for Adjusting or Replacing Garage Door Tension Springs – 1/2″ Diameter x 16″ Long Round Steel Rods (Pack of 2) - Must have tool, gd 52238 torsion spring winding rods is the only tool recommended to make torsion spring adjustments to balance the weight of a garage door failure to use these rods when replacing or adjusting torsion springs may result in personal injury and property damage. Wind and unwind springs, the pair of torsion spring winding rods are specifically designed for increasing (winding) and decreasing (unwinding) the tension on residential garage door torsion springs. Dimensions, garage door torsion spring winding rods are 1/2″ in outside diameter and 16″ long they are designed to industry standard for  residential garage door use. Winding cones usage, winding cones should be wound and unwound 1/4 turn at a time torsion spring rods are not for use on winding cones larger than 33/64″ in diameter. Safety first, steel torsion rods allow you to safely perform torsion spring replacements and adjustments without worrying about keeping the spring tension under control when adjusting or replacing garage door torsion springs, it is extremely important that these tasks are not attempted with any tools other than these rods.

 

Pack of 2 Satin Brass 35 Inch X 35 Inch with 58 Radius Spring Door Hinges

(Pack of 2) Satin Brass 3.5 Inch X 3.5 Inch with 5/8 Radius Spring Door Hinges

(Pack of 2) Satin Brass 3.5 Inch X 3.5 Inch with 5/8 Radius Spring Door Hinges - Two 3. This three knuckle hinge is adjustable and the spring tension can be increased or decreased by using the included adjusting tool. 5″ x 3. This full mortise single acting spring hinge is recommended for use where automatic self closing of a door is required. Spring hinges are fully assembled and include all necessary screws for application. 5″ (5/8″ radius corner) door spring hinge in satin brass us3 finish.

 

NEW 00754866 Dishwasher Door Spring for BOSCH made by OEM 754866 PS8770519 00623540 00627230 00659339 00751392 623540 627230 659339 751392 PS8770519 AP5804978 3279707 1 YEAR WARRANTY

NEW 00754866 Dishwasher Door Spring for BOSCH made by OEM 754866 PS8770519 00623540, 00627230, 00659339, 00751392, 623540, 627230, 659339, 751392, PS8770519, AP5804978, 3279707, 1 YEAR WARRANTY

NEW 00754866 Dishwasher Door Spring for BOSCH made by OEM 754866 PS8770519 00623540, 00627230, 00659339, 00751392, 623540, 627230, 659339, 751392, PS8770519, AP5804978, 3279707, 1 YEAR WARRANTY - Part number 00754866 replaces 00623540, 00627230, 00659339, 00751392, 623540, 627230, 659339, 751392, ps8770519, ap5804978, 3279707. This part works with the following brands bosch, thermador, gaggenau. Contact us for compatibility questions. Made by oem manufacturer / 1 year replacement warranty. Packaging may vary.

 

Pair of 218 X 2 X 21 - 33 Garage Door Torsion Springs with Winding Bars 23

Pair of 218 X 2″ X 21″ – 33″ Garage Door Torsion Springs with Winding Bars (23)

Pair of 218 X 2″ X 21″ – 33″ Garage Door Torsion Springs with Winding Bars (23) - Extension and torsion springs, along with attached hardware, are under extreme tension at all times. Professional installation is recommended. All tension must be released from springs before any work is performed. Do not attempt to install springs or hardware yourself unless you have the proper tools, reasonable mechanical aptitude and experience, and upper arm strength. Read and understand all instructions before you begin work. Warning torsion springs, extension springs, and related door hardware can cause serious injury or death if not handled and installed properly.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.