20 Most Wanted Corner Radius End Mills

 

Melin Tool CCMG Carbide Corner Radius End Mill Uncoated Bright Finish 30 Deg Helix 4 Flutes 2 Overall Length 01875 Cutting Diameter 01875 Shank Diameter 0030 Corner Radius

Melin Tool CCMG Carbide Corner Radius End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 2″ Overall Length, 0.1875″ Cutting Diameter, 0.1875″ Shank Diameter, 0.030″ Corner Radius

Melin Tool CCMG Carbide Corner Radius End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 2″ Overall Length, 0.1875″ Cutting Diameter, 0.1875″ Shank Diameter, 0.030″ Corner Radius - Radius gives added strength to corner. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Used when a radius is permissable. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.

 

Niagara Cutter N85610-060 Carbide Corner Radius End Mill TiAlN Finish Roughing and Finishing Cutting 30-Degree Helix 4-Flute 3 OAL 0500 Cut Diameter 0500 Shank Diameter 006 Radius

Niagara Cutter N85610-060 Carbide Corner Radius End Mill, TiAlN Finish, Roughing and Finishing Cutting, 30-Degree Helix, 4-Flute, 3″ OAL, 0.500″ Cut Diameter, 0.500″ Shank Diameter, 0.06″ Radius

Niagara Cutter N85610-060 Carbide Corner Radius End Mill, TiAlN Finish, Roughing and Finishing Cutting, 30-Degree Helix, 4-Flute, 3″ OAL, 0.500″ Cut Diameter, 0.500″ Shank Diameter, 0.06″ Radius - Four flutes produce a better finish than fewer flutes. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.

 

Niagara Cutter N57906 Carbide Corner Radius End Mill Long Reach Uncoated Bright Finish RoughingFinishing Cut 40-Degree 3-Flute 4 OAL 1000 Cut Diameter 1000 Shank Diameter 004 Radius

Niagara Cutter N57906 Carbide Corner Radius End Mill, Long Reach, Uncoated Bright Finish, Roughing/Finishing Cut, 40-Degree, 3-Flute, 4″ OAL, 1.000″ Cut Diameter, 1.000″ Shank Diameter, 0.04″ Radius

Niagara Cutter N57906 Carbide Corner Radius End Mill, Long Reach, Uncoated Bright Finish, Roughing/Finishing Cut, 40-Degree, 3-Flute, 4″ OAL, 1.000″ Cut Diameter, 1.000″ Shank Diameter, 0.04″ Radius - Corner radius end mills with extended-reach neck style have cutting edges with rounded corners to reduce chipping and provide longer tool life, and a long neck to provide access to recessed areas of the workpiece. Wiper flat on cutting edges for a smoother finish than conventional end mills. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. 40-degree helix provides the efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications.

 

Kodiak Cutting Tools KCT151083 USA Made Solid Carbide 006 Corner Radius End Mill with 14 Shank Diameter 2 Flute 34 Length of Cut 2-12 Overall Length

Kodiak Cutting Tools KCT151083 USA Made Solid Carbide 0.06″ Corner Radius End Mill with 1/4″ Shank Diameter, 2 Flute, 3/4″ Length of Cut, 2-1/2″ Overall Length

Kodiak Cutting Tools KCT151083 USA Made Solid Carbide 0.06″ Corner Radius End Mill with 1/4″ Shank Diameter, 2 Flute, 3/4″ Length of Cut, 2-1/2″ Overall Length - 060 carbide, corner radius. 1/4 inch diameter solid carbide end mill, with radius 1/4″ shank 3/4″ length of cut 2-1/2″ overall length 2 flute radius-.

 

Niagara Cutter N61813 Carbide Corner Radius End Mill TiAlN Finish Finishing Cut 35 Degree Helix 3 Flutes 25 Overall Length 0281 Cut Diameter 03125 Shank Diameter 0020 Corner Radius

Niagara Cutter N61813 Carbide Corner Radius End Mill, TiAlN Finish, Finishing Cut, 35 Degree Helix, 3 Flutes, 2.5″ Overall Length, 0.281″ Cut Diameter, 0.3125″ Shank Diameter, 0.020″ Corner Radius

Niagara Cutter N61813 Carbide Corner Radius End Mill, TiAlN Finish, Finishing Cut, 35 Degree Helix, 3 Flutes, 2.5″ Overall Length, 0.281″ Cut Diameter, 0.3125″ Shank Diameter, 0.020″ Corner Radius - Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. 35-degree helix angle provides increased cutting action and chip evacuation compared to lower helix angles for machining stainless steel and titanium. Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications.

 

Kodiak Cutting Tools KCT151072 USA Made Solid Carbide 0045 Corner Radius End Mill with 14 Shank Diameter 2 Flute 34 Length of Cut 2-12 Overall Length

Kodiak Cutting Tools KCT151072 USA Made Solid Carbide 0.045″ Corner Radius End Mill with 1/4″ Shank Diameter, 2 Flute, 3/4″ Length of Cut, 2-1/2″ Overall Length

Kodiak Cutting Tools KCT151072 USA Made Solid Carbide 0.045″ Corner Radius End Mill with 1/4″ Shank Diameter, 2 Flute, 3/4″ Length of Cut, 2-1/2″ Overall Length - 1/4 inch diameter solid carbide end mill, with radius 1/4″ shank 3/4″ length of cut 2-1/2″ overall length 2 flute radius-. 045 carbide, corner radius.

 

Melin Tool VXMG Carbide Corner Radius End Mill Variable Helix nACo Monolayer Finish Roughing Cut Helix 4 Flutes 2 Overall Length 03750 Cutting Diameter 03750 Shank Diameter 003 Corner Radius

Melin Tool VXMG Carbide Corner Radius End Mill, Variable Helix, nACo Monolayer Finish, Roughing Cut, Helix, 4 Flutes, 2″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter, 0.03″ Corner Radius

Melin Tool VXMG Carbide Corner Radius End Mill, Variable Helix, nACo Monolayer Finish, Roughing Cut, Helix, 4 Flutes, 2″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter, 0.03″ Corner Radius - Round shanks allow use with a wide variety of toolholding systems. Enables higher spindle speed and heavier chip loads. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Provides chatter-free machining. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

Kodiak Cutting Tools KCT152304 USA Made Solid Carbide 006 Corner Radius End Mill with 12 Shank Diameter 4 Flute 1 Length of Cut 3 Overall Length

Kodiak Cutting Tools KCT152304 USA Made Solid Carbide 0.06″ Corner Radius End Mill with 1/2″ Shank Diameter, 4 Flute, 1″ Length of Cut, 3″ Overall Length

Kodiak Cutting Tools KCT152304 USA Made Solid Carbide 0.06″ Corner Radius End Mill with 1/2″ Shank Diameter, 4 Flute, 1″ Length of Cut, 3″ Overall Length - 060 carbide, corner radius. 1/2 inch diameter solid carbide end mill, with radius 1/2″ shank 1″ length of cut 3″ overall length 4 flute radius-.

 

Bassett HPEM-3 Series Solid Carbide High-Performance End Mill TiCN Coated 3 Flute 30 Degrees Helix 0020 Radius Corner End 0375 Cutting Length 14 Cutting Diameter 2 Length Pack of 1

Bassett HPEM-3 Series Solid Carbide High-Performance End Mill, TiCN Coated, 3 Flute, 30 Degrees Helix, 0.020″ Radius Corner End, 0.375″ Cutting Length, 1/4″ Cutting Diameter, 2″ Length (Pack of 1)

Bassett HPEM-3 Series Solid Carbide High-Performance End Mill, TiCN Coated, 3 Flute, 30 Degrees Helix, 0.020″ Radius Corner End, 0.375″ Cutting Length, 1/4″ Cutting Diameter, 2″ Length (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Titanium carbonitride coatings are harder and more wear-resistant than tin for improved tool life and faster cutting speeds. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Ideally suited for use in stainless steel and exotics such as hastalloy, waspalloy, and inconel. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment.

 

Niagara Cutter N62026-125 Carbide Corner Radius End Mill TiAlN Finish Finishing Cutting 45-Degree Helix 5 Flutes 3 Overall Length 1000 Cut Diameter 1000 Shank Diameter 0125 Radius

Niagara Cutter N62026-125 Carbide Corner Radius End Mill, TiAlN Finish, Finishing Cutting, 45-Degree Helix, 5 Flutes, 3″ Overall Length, 1.000″ Cut Diameter, 1.000″ Shank Diameter, 0.125″ Radius

Niagara Cutter N62026-125 Carbide Corner Radius End Mill, TiAlN Finish, Finishing Cutting, 45-Degree Helix, 5 Flutes, 3″ Overall Length, 1.000″ Cut Diameter, 1.000″ Shank Diameter, 0.125″ Radius - Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings. 45-degree helix provides efficient cutting action and chip evacuation for fine-finish peripheral milling. Five flutes produce a better finish than fewer flutes. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.

 

Melin Tool AMG-M-M Carbide Corner Radius End Mill Metric Uncoated Bright Finish 30 Deg Helix 2 Flutes 38mm Overall Length 25mm Cutting Diameter 3mm Shank Diameter 04mm Corner Radius

Melin Tool AMG-M-M Carbide Corner Radius End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 38mm Overall Length, 2.5mm Cutting Diameter, 3mm Shank Diameter, 0.4mm Corner Radius

Melin Tool AMG-M-M Carbide Corner Radius End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 38mm Overall Length, 2.5mm Cutting Diameter, 3mm Shank Diameter, 0.4mm Corner Radius - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. 30 degree helix angle. Used when a radius is permissable. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Kodiak Cutting Tools KCT153228 USA Made Solid Carbide 003 Corner Radius End Mill with 14 Shank Diameter 4 Flute 1 Length of Cut 4 Overall Length

Kodiak Cutting Tools KCT153228 USA Made Solid Carbide 0.03″ Corner Radius End Mill with 1/4″ Shank Diameter, 4 Flute, 1″ Length of Cut, 4″ Overall Length

Kodiak Cutting Tools KCT153228 USA Made Solid Carbide 0.03″ Corner Radius End Mill with 1/4″ Shank Diameter, 4 Flute, 1″ Length of Cut, 4″ Overall Length - . 030 carbide, corner radius. 1/4 inch diameter solid carbide end mill, with radius 1/4″ shank 1″ length of cut 4″ overall length 4 flute radius-0.

 

Sandvik Coromant R216T4 Carbide Corner Radius End Mill Metric TiAlN Monolayer Finish 30 Deg Helix 4 Flutes 73mm Overall Length 12mm Cutting Diameter 12mm Shank Diameter 1mm Corner Radius

Sandvik Coromant R216.T4 Carbide Corner Radius End Mill, Metric, TiAlN Monolayer Finish, 30 Deg Helix, 4 Flutes, 73mm Overall Length, 12mm Cutting Diameter, 12mm Shank Diameter, 1mm Corner Radius

Sandvik Coromant R216.T4 Carbide Corner Radius End Mill, Metric, TiAlN Monolayer Finish, 30 Deg Helix, 4 Flutes, 73mm Overall Length, 12mm Cutting Diameter, 12mm Shank Diameter, 1mm Corner Radius - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Gauge length 1102. Geometry n. Shank style. Straight 9° to 12° general purpose 60% core diameter. Round shanks allow use with a wide variety of toolholding systems. Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (“dry machining”).

 

Kodiak Cutting Tools KCT153503 USA Made Solid Carbide 0015 Corner Radius End Mill with 12 Shank Diameter 4 Flute 2 Length of Cut 4 Overall Length

Kodiak Cutting Tools KCT153503 USA Made Solid Carbide 0.015″ Corner Radius End Mill with 1/2″ Shank Diameter, 4 Flute, 2″ Length of Cut, 4″ Overall Length

Kodiak Cutting Tools KCT153503 USA Made Solid Carbide 0.015″ Corner Radius End Mill with 1/2″ Shank Diameter, 4 Flute, 2″ Length of Cut, 4″ Overall Length - 1/2 inch diameter solid carbide end mill, with radius 1/2″ shank 2″ length of cut 4″ overall length 4 flute radius-0. . 015 carbide, corner radius.

 

Wokesi 4mm 6mm Cutting DiaSuqare Nose End MillBall Nose End Mill and Corner Radius End Mill SetPack of 6HRC45TiAlN CoatedSolid CarbideCNC Lathe Router Bits Milling Tools 4mm6mm HRC45

Wokesi 4mm 6mm Cutting Dia,Suqare Nose End Mill,Ball Nose End Mill and Corner Radius End Mill Set,Pack of 6,HRC45,TiAlN Coated,Solid Carbide,CNC Lathe Router Bits Milling Tools (4mm+6mm HRC45)

Wokesi 4mm 6mm Cutting Dia,Suqare Nose End Mill,Ball Nose End Mill and Corner Radius End Mill Set,Pack of 6,HRC45,TiAlN Coated,Solid Carbide,CNC Lathe Router Bits Milling Tools (4mm+6mm HRC45) - 5package1 pack of 6 pieces endmill cutter. 3suitable for process aluminium,copply,alloy,iron and steel under hrc45(hra73)high performance. 4high micro hardness,high abrasion resistance,good toughness. 2materialtungsten carbide,high quality tialn coating,getting long tool life. 1contains 6pcs4mm+6mmdia square end,4mm+6mmdia ball end,4mm+6mm dia corner radius end.

 

Kodiak Cutting Tools KCT154603 USA Made Solid Carbide 003 Corner Radius End Mill with 14 Shank Diameter 4 Flute 1-12 Length of Cut 4 Overall Length

Kodiak Cutting Tools KCT154603 USA Made Solid Carbide 0.03″ Corner Radius End Mill with 1/4″ Shank Diameter, 4 Flute, 1-1/2″ Length of Cut, 4″ Overall Length

Kodiak Cutting Tools KCT154603 USA Made Solid Carbide 0.03″ Corner Radius End Mill with 1/4″ Shank Diameter, 4 Flute, 1-1/2″ Length of Cut, 4″ Overall Length - . 030 carbide, corner radius. 1/4 inch diameter solid carbide end mill, with radius 1/4″ shank 1-1/2″ length of cut 4″ overall length 4 flute radius-0.

 

Micro 100 ARC-375-2-010S 2-Flute 45° Helix Corner Radius End Mill ZirconiumNitrogen Coated 38 Cutter Diameter 38 Shank Diameter 2-12 Overall Length 78-Flute Length 0010 Corner Radius Solid Carbide Tool

Micro 100 ARC-375-2-010S 2-Flute 45° Helix Corner Radius End Mill, Zirconium/Nitrogen Coated, 3/8″ Cutter Diameter, 3/8″ Shank Diameter, 2-1/2″ Overall Length, 7/8″-Flute Length, 0.010″ Corner Radius, Solid Carbide Tool

Micro 100 ARC-375-2-010S 2-Flute 45° Helix Corner Radius End Mill, Zirconium/Nitrogen Coated, 3/8″ Cutter Diameter, 3/8″ Shank Diameter, 2-1/2″ Overall Length, 7/8″-Flute Length, 0.010″ Corner Radius, Solid Carbide Tool - Made in usa. Center cutting 2, 3 & 5 flute. Coated zrn for extended tool life. “Stealth” cutter-profile these high performance end mills feature a 45° helix and are engineered for high speed cutting in aluminum, non-ferrous and soft materials. The special flute geometry provides an extremely smooth and silent cutting action for an exceptional surface finish.

 

YG-1 G8C50 Carbide Corner Radius End Mill TIALN Multilayer Finish 30 Deg Helix 4 Flutes 3 Overall Length 05 Cutting Diameter 05 Shank Diameter 0012 Corner Radius

YG-1 G8C50 Carbide Corner Radius End Mill, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 3″ Overall Length, 0.5″ Cutting Diameter, 0.5″ Shank Diameter, 0.012″ Corner Radius

YG-1 G8C50 Carbide Corner Radius End Mill, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 3″ Overall Length, 0.5″ Cutting Diameter, 0.5″ Shank Diameter, 0.012″ Corner Radius - High performance. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (“dry machining”). Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Melin Tool CCMG-M-M Carbide Corner Radius End Mill Metric Uncoated Bright Finish 30 Deg Helix 4 Flutes 38mm Overall Length 2mm Cutting Diameter 3mm Shank Diameter 04 Corner Radius

Melin Tool CCMG-M-M Carbide Corner Radius End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 38mm Overall Length, 2mm Cutting Diameter, 3mm Shank Diameter, 0.4″ Corner Radius

Melin Tool CCMG-M-M Carbide Corner Radius End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 38mm Overall Length, 2mm Cutting Diameter, 3mm Shank Diameter, 0.4″ Corner Radius - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. 30 degree helix angle. Used when a radius is permissable. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

GUHRING 9030790095240 RF100 U Carbide Corner Radius End Mill Variable Helix FIREX Finish 4 Flute 38 Size 2-12 Overall Length 0031 Radius

GUHRING 9030790095240 RF100 U Carbide Corner Radius End Mill, Variable Helix, FIREX Finish, 4 Flute, 3/8″ Size, 2-1/2″ Overall Length, 0.031″ Radius

GUHRING 9030790095240 RF100 U Carbide Corner Radius End Mill, Variable Helix, FIREX Finish, 4 Flute, 3/8″ Size, 2-1/2″ Overall Length, 0.031″ Radius - Designed for slotting, roughing and finishing operations. . Firex coated for additional heat and abrasion resistance, the rf100 u style is a versatile design for the ever changing materials of the job shop environment. The rf100 u is a four flute 35º/38º variable helix design for a wide range of materials.