20 Most Wanted Tool Posts

 

South Bend Lathe SB1346 Rocker Tool Post for 13-Inch Lathes #ad

South Bend Lathe SB1346 Rocker Tool Post for 13-Inch Lathes

South Bend Lathe SB1346 Rocker Tool Post for 13-Inch Lathes #ad - Accepts 5/8-inch wide tool holders. T-nut size is 2-inch square by 5/16-inch thick. Adjustable rake angle. Precision made for precision results.

 

ALORIS 3 PC AXA INTRO-PRO SET TOOL POST LATHE HOLDERS CNC USA #ad

ALORIS 3 PC. AXA INTRO-PRO SET TOOL POST & LATHE HOLDERS CNC USA

ALORIS 3 PC. AXA INTRO-PRO SET TOOL POST & LATHE HOLDERS CNC USA #ad - Precision-engineered to assure repetitive accuracy. For use on lathes with up to 12″ swing (defined as the diameter that can be turned over the bed). Quickly and easily installed on any engine lathe, bench or cnc lathe for a wide range of operations-from fine precision work to heavy duty cutting. Includes (1) axa wedge-style tool post (includes a machineable base to make a t-slot nut to fit your lathe) (1) axa #1 turning & facing holder (up to 1/2″ tool capacity) (1) axa #2 boring turning & facing holder (up to 1/2″ tool capacity). Our part # alo-axa-1-ip.

 

Sherline 3057 Rocker Tool Post #ad

Sherline 3057 Rocker Tool Post

Sherline 3057 Rocker Tool Post #ad - The cutting edge of a lathe tool should be set right on or just slightly below the centerline of the part being machined. The sherline rocker tool post is designed to eliminate the need for shimming. The height of the cutting edge can be changed by simply adjusting the two clamping screws. . Older tools that have been sharpened numerous times may require shimming to bring them up to the correct height. With new lathe tools this is not a problem, because sherline tool posts are made to hold them at the correct height. This inexpensive accessory reduces setup time and also extends the life and the usefulness of your old lathe tools.

 

6-12 2 AXA Boring Turning Quick Change Tool Post Facing Holder 250-102 #ad

6-12” #2 AXA Boring Turning Quick Change Tool Post Facing Holder 250-102

6-12” #2 AXA Boring Turning Quick Change Tool Post Facing Holder 250-102 #ad - Quantity 1 weight 15 ounce for use with axa tool post 250-100 or 250-111 up to 12″ swing. Tool bit capacity 3/16, 1/2 round boring bar shank diameter 7/16. 250-102 #2 axa boring turning tool post. Matching tool post piston 202-9461(251-100) wedge 202-9474(251-111) efficient “v”groove design securely holds round shank tools as well as square square bits 3/16″, 1/2″. Type 102 a 15/16 b 1/2 c 7/16 d 1-1/2 .

 

Sherline 3003 - Two-Position Tool Post 14 14 #ad

Sherline 3003 – Two-Position Tool Post 1/4″ & 1/4″

Sherline 3003 – Two-Position Tool Post 1/4″ & 1/4″ #ad - The change may be to switch from a left-hand tool to a right-hand tool, from a sharp-nosed tool to a radius-tipped tool, or from a roughing tool to a finishing tool. By having one or more of these tool posts with your favorite lathe tool pre-mounted in them, you can simplify your work and reduce the time required to change tools. Other special tool posts are also available p/n 3008, 2-position tool post, 5/16″”/3/8″” for larger size lathe tools p/n 3057, rocker tool post p/n 7600, 3/8″” insert holder tool post (3/8″” square and round) p/n 2250, quick-change tool holder system”. It is not unusual to have to stop and change lathe tools several times while turning a part on the lathe. This time can be reduced by using a two-position tool post. Each sherline two-position tool post mounts two 1/4″” lathe tools. Whatever the reason, each change requires a little setup time.

 

Steelex D4390 Mini Quick Change Tool Post Set #ad

Steelex D4390 Mini Quick Change Tool Post Set

Steelex D4390 Mini Quick Change Tool Post Set #ad - Set includes a 2-way tool post, 5 tool holders, a 3/8-inch drill chuck with 1/2-inch shank, and wrenches. 54-inch high x 3. The tool post size measures 2. 45-inch deep. This quick change tool post set is sized to fit mini lathes with swings from 7-inch to 11-inch. The tool holders include a turning holder, turning/boring bar holder, 1/2-inch boring bar holder, parting tool holder with cut-off blade, and knurling tool with interchangeable fine, medium, and coarse knurling wheels. Nothing beats the convenience of a quick change tool post for all your metal turning needs. Maximum tool bit size is 1/2-inch. 45-inch wide x 1.

 

Two-position tool post 14 x 14 #ad

Two-position tool post, 1/4″ x 1/4″

Two-position tool post, 1/4″ x 1/4″ #ad - Designed for use with sherline tools only. To use the second cutter, simply loosen the hold-down screw in the center and rotate the post 180°. This can speed up operations where a job requires constant switching between two tools for example, a turning tool and a form tool. Similar to the standard tool post, this post has an additional slot cut in the opposite side so that two cutting tools can be held at the same time.

 

10-15 Piston Quick Change Tool Poste Set FR Aloris 200 BXA Boring Tool Holder #ad

10-15” Piston Quick Change Tool Poste Set FR Aloris 200 BXA Boring Tool Holder

10-15” Piston Quick Change Tool Poste Set FR Aloris 200 BXA Boring Tool Holder #ad - No 7 universal parting blade tool holder with 11/16″ blade height. No 4 boring bar tool holder with 3/4 & 1″ capacity. No 2 boring, turning & facing tool holder with 1/4-5/8″ tool capacity. No 1 turning & tool holder with 1/4-5/8″ tool capacity. No 10 knurling, facing & turning tool holder 1/4-5/8″.

 

ALORIS 11 PC AXA QUICK CHANGE LATHE TOOL SET TOOL POST HOLDERS CNC USA #ad

ALORIS 11 PC. AXA QUICK CHANGE LATHE TOOL SET TOOL POST & HOLDERS CNC USA

ALORIS 11 PC. AXA QUICK CHANGE LATHE TOOL SET TOOL POST & HOLDERS CNC USA #ad - Interchangeable with dorian & phase ii axa series tool posts. Precision-engineered to assure repetitive accuracy. Our part # alo-axa-1-as. For use on lathes with up to 12″ swing (defined as the diameter that can be turned over the bed).

 

Dorian Tool D2 Chromium Molybdenum Alloy Steel Quick Change Turning Facing and Boring Toolholder for SDN35CXA Super Quick Change Tool Post 34 - 1 Tool Capacity 3-34 Width 1-12 Height #ad

Dorian Tool D2 Chromium Molybdenum Alloy Steel Quick Change Turning, Facing and Boring Toolholder for SDN35CXA Super Quick Change Tool Post, 3/4″ – 1″ Tool Capacity, 3-3/4″ Width, 1-1/2″ Height

Dorian Tool D2 Chromium Molybdenum Alloy Steel Quick Change Turning, Facing and Boring Toolholder for SDN35CXA Super Quick Change Tool Post, 3/4″ – 1″ Tool Capacity, 3-3/4″ Width, 1-1/2″ Height #ad - Fits industry standard toolposts. Applicable for holds square shank tools, holds boring bars, turning and facing, light to medium boring, threading and grooving, cut-off applications. The “v” groove makes this holder more versatile so that it can hold either square shank toolholders or boring bars. . Holds the tool close to the tool post to maximize rigidity when turning, facing, threading or boring.

 

Aloris Tool AXA Super-Precision Tool Post #ad

Aloris Tool AXA Super-Precision Tool Post

Aloris Tool AXA Super-Precision Tool Post #ad - Precision engineered to assure repetitive accuracy. Quickly and easily installed on any engine lathe, bench or cnc lathe, for a wide range of operations — from fine precision work to heavy duty cutting. Advanced design provides built-in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances.

 

4 PC BXA WEDGE TOOL POST INTRO SET CNC TURNINGFACING BORING LATHE HOLDERS #ad

4 PC BXA WEDGE TOOL POST INTRO SET CNC TURNING,FACING, & BORING LATHE HOLDERS

4 PC BXA WEDGE TOOL POST INTRO SET CNC TURNING,FACING, & BORING LATHE HOLDERS #ad - For use on lathes with 10-15″ swing (defined as the diameter that can be turned over the bed). Quickly and easily installed on an engine, bench, or turret lathe for a wide range of operations. Our part # all-47228. Precision-engineered to assure repetitive accuracy. Slash your setup time- instant changing from one operation to another.

 

NEW BXA 10 KNURLING TURNING FACING HOLDER LATHE TOOL POST 250-210 #ad

NEW BXA #10 KNURLING TURNING & FACING HOLDER LATHE TOOL POST 250-210

NEW BXA #10 KNURLING TURNING & FACING HOLDER LATHE TOOL POST 250-210 #ad - For use with bxa tool posts 250-200 or 250-222 10-15″ swing. Supplied with a set of high speed precision ground and lapped medium diamond knurls (2 pcs). Versatile holder for turning and facing as well as knurling. Securely holds your 1/4″ to 5/8″ tool bits. Our part # all-47207.

 

Quick Change Piston Tool Post Holders 6-12 100 AXA #ad

Quick Change Piston Tool Post & Holders 6-12″ 100 AXA

Quick Change Piston Tool Post & Holders 6-12″ 100 AXA #ad - Holder #10 is knurling, facing and turning 3/16 inch-1/2 inch. This quick change piston tool post and holders comes with holders #1, #2, #4, #7, and #10. Holder #7 is universal parting blade 1/2 inch. Holder #2 is boring, turning and facing 3/16 inch-1/2 inch holder #4 is boring, heavy duty 5/8 inch and3/4 inch. Holder #1 is boring and facing 3/16 inch-1/2 inch. It has a swing of 6-12 inch and is interchangeable with alorris, yuasa, and phase ii.

 

IRWIN Tools Magnetic Post Level 1794482 #ad

IRWIN Tools Magnetic Post Level (1794482)

IRWIN Tools Magnetic Post Level (1794482) #ad - Irwin tools magnetic post level (1794482). This level has a magnetic strip and a rubber strap for convenient hands-free installation of posts, railings, pipes, and more. Allows you to plumb and level posts, poles, pipes, railings and more. Molded frame is durable in all conditions.

 

250-304 CXA 4 Quick Change Boring Bar Tool Post Holder Phase II Aloris Dorian #ad

250-304 CXA #4 Quick Change Boring Bar Tool Post Holder Phase II Aloris Dorian

250-304 CXA #4 Quick Change Boring Bar Tool Post Holder Phase II Aloris Dorian #ad - Equipped with a split bushing to accommodate a boring bar of smaller diameter holds 3/4″ tool with bushing, 1″ diameter without bushing. Quantity 1 weight 5 lbs. For use with cxa tool posts 250-300 or 250-333 13-18″ swing. Precision ground and hardened completely sealed for maintenance free operation. Interchangeable with dorian, aloris, & phase ii cxa series tool posts while we guarantee your satisfaction, these especially work best with our matching tool posts.

 

JET 650300 300 Series Quick Change Wedge Tool Post Set #ad

JET 650300 300 Series Quick Change Wedge Tool Post Set

JET 650300 300 Series Quick Change Wedge Tool Post Set #ad - #1 boring & facing. #4 boring, heavy duty. #7 universal parting blade. #2 boring, turning & facing. Each set consists of one piston type tool post and one of each of 5 tool holders.

 

PHASE II 6 Piece Quick Change Tool Post Set - Model  400 WST LATHE SWING  14 - 20 #ad

PHASE II 6 Piece Quick Change Tool Post Set – Model .: 400 WST LATHE SWING : 14″ – 20″

PHASE II 6 Piece Quick Change Tool Post Set – Model .: 400 WST LATHE SWING : 14″ – 20″ #ad - Tool posts are precision engineered to ensure repetitive accuracy. Set include (1) tool post & (1) each of toolholders #1,#2,#4,#7, and #10.

 

ALORIS Super Precision Quick Change Tool Post Set - Model  BXA LATHE SWING  10 - 15 #ad

ALORIS Super Precision Quick Change Tool Post Set – Model .: BXA LATHE SWING : 10″ – 15″

ALORIS Super Precision Quick Change Tool Post Set – Model .: BXA LATHE SWING : 10″ – 15″ #ad - (1) each of toolholders #1, #2, #4d and #7. No need to disturb basic set-up. Includes (1) tool post. No tool post indexing necessary.

 

JET 650295 Series 200 Quick Change Wedge Tool Post Set #ad

JET 650295 Series 200 Quick Change Wedge Tool Post Set

JET 650295 Series 200 Quick Change Wedge Tool Post Set #ad - 200(bxa) series tool post. #2 boring, turning & facing. Set contains one piston type tool post and one each of 5 tool holders. #1 boring & facing. #4 boring, heavy duty.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.