20 Top Rail Stiles for 2019

 

InfinityTools 83-034 2-Piece 15° Shaker Rail Stile Matched Shaper Cutter Set 34 Bore #ad

InfinityTools 83-034, 2-Piece 15° Shaker Rail & Stile Matched Shaper Cutter Set, 3/4″ Bore

InfinityTools 83-034, 2-Piece 15° Shaker Rail & Stile Matched Shaper Cutter Set, 3/4″ Bore #ad - 5mm slot for undersized ¼” plywood. No more rattle in your doors when using plywood. With the optional glass door cutter, item #83-032, you can make beautiful glass panel doors by rabbeting the back of the door frame in a single operation. Making flat panel doors make sure to purchase our 83-033 plywood conversion slot cutter. We offer these 2-piece factory matched rail & stile cutters in three popular profiles ogee, standard and 15° shaker. This kit works with items 83-030, 83-031, and 83-034 and will cut a 5. C. Each are perfect for use with doorframe stock from ¾” to 1-1/4″ thick. For cutting arched doors make sure to purchase our rub-102 rub collar to be used with the stile profile cutter when following arched door templates. ) To ensure a precise fit and the cleanest cutting action possible. N. We grind these micro-grain carbide cutters on state-of-the-art computer numerical controlled machines (c.

 

MLCS Stacked Rail and Stile Router Bit - Ogee Profile #ad

MLCS Stacked Rail and Stile Router Bit – Ogee Profile

MLCS Stacked Rail and Stile Router Bit – Ogee Profile #ad - The easy way to make perfect rails and stiles with only one bit. All that is required is to simply lower or raise the bit. For best results use only with your router mounted in a table. 2 flute, carbide-tipped with totally enclosed ball bearing guide. Cut rails and stiles without having to reverse, switch or reassemble cutters, or without having to remove the bit from your router. 1/2″ shank.

 

Traditional Stile and Rail Router Bit Set #ad

Traditional Stile and Rail Router Bit Set

Traditional Stile and Rail Router Bit Set #ad - The one-piece cutting edge allows you to achieve a perfect fit without having to disassemble an arbor and install shims. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. . Final sharpening with 600, 800 grit diamond wheels. Baked-on anti-stick coating to reduce pitch and resin buildup. K10 and k20 grade carbide for clean cutting action. If you are not 100% satisfied with these bits, send them back for a refund. 1/4″ x 3/8″ groove. 5/8″ bearing. Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. With ball bearing guide, you can even use a template to build doors with curving rails. Precision balanced for smooth operation.

 

MLCS Matched Rail and Stile Router Bit 2 Bit Set--Traditional Profile #ad

MLCS Matched Rail and Stile Router Bit 2 Bit Set–Traditional Profile

MLCS Matched Rail and Stile Router Bit 2 Bit Set–Traditional Profile #ad - Voted “best cut” in fine woodworking #107. Free standard shipping in contiguous usa. Great quality and value. 2 piece matched set for perfectly mated joints. Stylish rails and stiles for raised panel doors.

 

Yonico 12121 Rail and Stile Router Bit Ogee Stacked 12-Inch Shank #ad

Yonico 12121 Rail and Stile Router Bit Ogee Stacked 1/2-Inch Shank

Yonico 12121 Rail and Stile Router Bit Ogee Stacked 1/2-Inch Shank #ad - No need to switch or reassemble cutters. Two flute carbide cutters with ball bearing guide. Simply cut the stile and then lower the bit in your table to make the rail cuts. The yonico stacked rail and stile router bit will cut both rail and stile in a beautiful ogee design. Shank is 1/2″. Use with stock between 3/4″, 15/16″ thickness.

 

Infinity Tools 83-030 2-Piece Ogee Rail Stile Matched Shaper Cutter Set 34 Bore #ad

Infinity Tools 83-030, 2-Piece Ogee Rail & Stile Matched Shaper Cutter Set, 3/4″ Bore

Infinity Tools 83-030, 2-Piece Ogee Rail & Stile Matched Shaper Cutter Set, 3/4″ Bore #ad - For 3/4″ to 1-1/4″ thick material. 3-wing micro-grain carbide tips for a long life and repeated sharpening. Precision machined from fatigue-proof steel for extra strength. Silver ptfe coating reduces resin build-up for fast and easy cleaning. 3/4″ bore x 2-5/8″ cutter diam x 3/8″ profile width.

 

MLCS Cabinet Door 6 Piece Rail and Stile Shaper Cutter Set--Round Over Profile #ad

MLCS Cabinet Door 6 Piece Rail and Stile Shaper Cutter Set–Round Over Profile

MLCS Cabinet Door 6 Piece Rail and Stile Shaper Cutter Set–Round Over Profile #ad - 3/8″ depth of cut. Versatile 3-in-1 shaper cutters make rail and stile doors with wood and glass panels, as well as tongue and groove joints. Fits both 1/2″ and 3/4″ spindles. 2-7/8″ large diameter. Set includes round over stile, 1/2″ straight, 1/4″ straight, rail for round over stile, 1/2″ straight, 1/4″ straight. For stock sizes 3/4″ to 1-1/4″.

 

Yonico 12338 Rail and Stile With Panel Bit Router Bit Set with Ogee 12-Inch Shank #ad

Yonico 12338 Rail and Stile With Panel Bit Router Bit Set with Ogee 1/2-Inch Shank

Yonico 12338 Rail and Stile With Panel Bit Router Bit Set with Ogee 1/2-Inch Shank #ad - Use with up to 1″ stock. Rail and stile bits create a perfectly matched rail and stile door frame. Bit shanks are 1/2″. Comes in a solid wood storage case. Ball bearing guides allow you to make precise cuts without the use of a fence. Features • industrial quality • c3 tungsten carbide cutters • solid hardened steel body • anti-kickback design • build-up resistant coating • satisfaction guaranteed. This 3 bit door making router bit set includes ogee rail and stile bits and a 2-1/2″ ogee panel raiser. The panel raiser puts a classic edge on the central panel of your door.

 

Yonico 12432 Cabinet Door Router 4 Bit Set with Rail Stile Panel Raiser and Glue Joint 12-Inch Shank #ad

Yonico 12432 Cabinet Door Router 4 Bit Set with Rail, Stile Panel Raiser and Glue Joint 1/2-Inch Shank

Yonico 12432 Cabinet Door Router 4 Bit Set with Rail, Stile Panel Raiser and Glue Joint 1/2-Inch Shank #ad - Simply set the center of the bit with the center of your stock. For use with up to 1″ stock. The panel raiser puts a classic ogee edge on the central panel of your door. Then, run one cut face up and the adjoining cut face down creating a perfect joint. Two flute carbide cutters & 1/2″ shanks. Set comes in a solid wood storage case. Rail and stile bits create a perfect round-over rail & stile door frame. Use the reversible glue joint bit for gluing up multiple boards to extend panel width. . The glue joint bit will rout both joining cuts. Fully enclosed ball bearing guides allow for precise cuts without the use of a fence. Make professional raised panel cabinet doors with the yonico 12432, 4 bit router bit set.

 

Kempston 409041 Reversible Rail Stile Cutter Classical 14-Inch Shank 1-58-Inch Cutting Diameter  1516-Inch Cutting Length #ad

Kempston 409041 Reversible Rail & Stile Cutter, Classical 1/4-Inch Shank, 1-5/8-Inch Cutting Diameter, 15/16-Inch Cutting Length

Kempston 409041 Reversible Rail & Stile Cutter, Classical 1/4-Inch Shank, 1-5/8-Inch Cutting Diameter, 15/16-Inch Cutting Length #ad - Cnc precision ground. Anti-kickback design. C3 or c4 premium carbide. Non-stick coating. Prefessional grade.

 

Sommerfelds 3 Piece Cove Raised Panel Set with our New Patented Chip-Free Roundover Rail Stile 12-Inch Shank #ad

Sommerfeld’s 3 Piece Cove Raised Panel Set with our New Patented Chip-Free Roundover Rail & Stile, 1/2-Inch Shank

Sommerfeld’s 3 Piece Cove Raised Panel Set with our New Patented Chip-Free Roundover Rail & Stile, 1/2-Inch Shank #ad - Full 1/2″ engagement on rail and stile for stronger joints and easier to measure drawer parts. New pantented chip-free design prevents edge tear-out. Machines material from 3/4″ to 7/8″ thick. Large 3-1/2″ diameter cove raised panel with backcutter. All bits are height matched for fast, no-hassle set-ups.

 

Freud 97-150 3 Piece Door Router Bit Set with Premier 99-760 Rail and Stile System and 99-515 Raised Panel Bit #ad

Freud 97-150 3 Piece Door Router Bit Set with Premier 99-760 Rail and Stile System and 99-515 Raised Panel Bit

Freud 97-150 3 Piece Door Router Bit Set with Premier 99-760 Rail and Stile System and 99-515 Raised Panel Bit #ad - Bit features freud’s tico hi-density carbide to maximize bit life and material finish. This set features freud’s 99-515 2 + 2 raised panel bit two small wings that cut downward and two large wings that shear upward, produce an extremely smooth cut in hardwoods, softwoods and even plywoods. This set allows the woodworker to build doors from 5/8 inch to 1-1/4 inch thickness and any length long tenon construction for rock-solid joints that last a lifetime. Optional cutters are available for double sided profile doors (99-860) and glass panel doors (54-760). Bit feature freud’s perma-shield coating that reduces heat and pitch build up along with rust.

 

BQLZR 12 Inch Shank 516 Inch Slot Width Cemented Carbide Rail Stile Finger Joint Glue Router Bit Cone Tenon Woodwork Cutter #ad

BQLZR 1/2 Inch Shank 5/16 Inch Slot Width Cemented Carbide Rail & Stile Finger Joint Glue Router Bit Cone Tenon Woodwork Cutter

BQLZR 1/2 Inch Shank 5/16 Inch Slot Width Cemented Carbide Rail & Stile Finger Joint Glue Router Bit Cone Tenon Woodwork Cutter #ad - Woodworking tools,suitable for use of trimming machine 4. 38 inch (l x w ) weight132g package include 1 x cone tenon router bit. 38 inch cutter height 21mm / 0. Cemented carbide constructed,1/2 inch shank diamater and 5/16 inch slot width 5. 42 x 1. 83 inch size 87 x 35 mm / 3. Feature 1. 3. Every product has a unique manufacturing part number label on the inner package that proves it has been qualified,which include part number,model number and inspection date information 2. Perfect choice of professionals and hobbyists specification materialcemented carbide color silver & yellow brand name bqlzr shank dia 1/2 inch slot width 5/16 inch cutter width 35mm / 1. If you have any questions about the item,please provide us the manufacturing part number for checking,your profits will be guaranteed.

 

Yonico 12238q Rail and Stile Router Bits with 2 Bit Round Over 14-Inch Shank #ad

Yonico 12238q Rail and Stile Router Bits with 2 Bit Round Over 1/4-Inch Shank

Yonico 12238q Rail and Stile Router Bits with 2 Bit Round Over 1/4-Inch Shank #ad - . Yonico rail and stile router bits produce impressive and perfect results with every cut yielding years of woodworking satisfaction. Yonico rail and stile router bit set (12238q) will cut rail & stile for cabinet doors in a classic round over design. Fully enclosed ball bearing guides allow for precise rail and stile cuts without the use of a fence. Two flute carbide cutters & 1/4″ shanks.

 

Yonico 12249 Rail and Stile Router Bit Set with 12-Inch Shank 2-Piece #ad

Yonico 12249 Rail and Stile Router Bit Set with 1/2-Inch Shank, 2-Piece

Yonico 12249 Rail and Stile Router Bit Set with 1/2-Inch Shank, 2-Piece #ad - Satisfaction guaranteed & lifetime warranty. Build-up and heat resistant teflon coating. Build-up & heat resistant teflon coating. Solid hardened steel bodies with anti-kickback design. Industrial quality router bits. C3 micro-grain tungsten carbide cutters. Satisfaction guaranteed and lifetime warranty.

 

MLCS Matched Rail and Stile Bit Set for Glass Doors #ad

MLCS Matched Rail and Stile Bit Set for Glass Doors

MLCS Matched Rail and Stile Bit Set for Glass Doors #ad - Easily create great looking glass doors with the same profile on the inside and outside of the glass with our matched 2 bit set. The special design allows you to make a matching profile glass bead retaining strip when used with a 1/8″ straight bit or 1/8″ saw blade. 2 flute, carbide-tipped. Use for curio cabinets, entertainment centers, and kitchen cabinet doors.

 

Yonico 12243 Rail and Stile Router Bits with Matched 2 Bit Standard Ogee 12-Inch Shank #ad

Yonico 12243 Rail and Stile Router Bits with Matched 2 Bit Standard Ogee 1/2-Inch Shank

Yonico 12243 Rail and Stile Router Bits with Matched 2 Bit Standard Ogee 1/2-Inch Shank #ad - Fully enclosed ball bearing guides allow for precise routing without the use of a fence. Rail and stile set comes in a solid wood storage case. Use the ogee rail and stile bits with up to 1″ stock. Complete your doors from our selection of yonico panel raisers giving it an enhanced finish. . Two flute carbide cutters & 1/2″ shanks. Yonico router bits are manufactured with c3 micrograin carbide, producing precision work and a smooth, detailed finish. Yonico rail and stile router bit set (12243) will cut both stile and rail for cabinet doors in the classic ogee design.

 

Yonico 12337 Rail and Stile Panel Raiser Router Bit Set with Large Ogee 12-Inch Shank 3-Piece #ad

Yonico 12337 Rail and Stile Panel Raiser Router Bit Set with Large Ogee 1/2-Inch Shank, 3-Piece

Yonico 12337 Rail and Stile Panel Raiser Router Bit Set with Large Ogee 1/2-Inch Shank, 3-Piece #ad - Ball bearing guides allow for precise cuts without the use of a fence. Set comes in a solid wood storage case. Included in this set large ogee panel raiser router bit, 2 bit matched large ogee rail & stile router bits, allen wrench plus extra spacers, solid wood storage case. The large 1-3/4″ diameter rail & stile router bits create a perfectly matched ogee door frame. The 3-1/2″ diameter panel raiser bit will put a large ogee edge on the central panel of your door. Large rail and stile cabinet doors are easy to make with this yonico 12337 raised panel cabinet door router bit set. Use this set with up to 7/8″ stock. Two flute carbide cutters & 1/2″ shanks. The panel raiser router bit can also be used to make attractive drawer fronts, table tops, plaques and moldings. All yonico router bits are manufactured with c3 carbide cutters providing multiple hard core use.

 

Rockler Classical Reversible Rail Stile Bit #ad

Rockler Classical Reversible Rail & Stile Bit

Rockler Classical Reversible Rail & Stile Bit #ad - 1-5/8″ diameter x 15/16″ cutter height x 1/2″ shank.  Available in chamfer, ogee and classical styles (27190, 23422 and 27602, respectively). Because the bit is bearing-guided, you can also rout arched rails without a template or fence. Important safety note do not invert any of the cutters be sure the carbide is facing the right direction for the rotation of the router. To cope the ends of the rails, run stock face up on table. For those who make cabinet doors only occasionally, this cutter provides an affordable, space-saving solution to routing cope and stick joints. One bit cuts both rail and stile profiles just remove the cutters and rearrange them to go from coping rail ends to routing grooves in the stiles. Stack the bit (starting from the shank end) as follows straight cutter, bearing, then profile cutter. Groove is 3/8″d x 1/4″h. 5/8″ bearing. Instructions for routing to cut the groove and profile on the insides of the rails and stiles, run stock face down on table. Stack the bit (starting from the shank end) as follows profile cutter, straight cutter, then bearing.

 

Yonico 12201 Rail and Stile Plywood Conversion Kit for 52mm Plywood #ad

Yonico 12201 Rail and Stile Plywood Conversion Kit for 5.2mm Plywood

Yonico 12201 Rail and Stile Plywood Conversion Kit for 5.2mm Plywood #ad - The yonico 12201 rail and stile conversion kit to replaces the existing groove cutters on your yonico rail & stile router bit set. . When using 1/4″ plywood for the panel, 1/4″ grooves will be too large as 1/4″ plywood is finished down to slightly less than 1/4″. This set is compatible with • yonico 12241 • yonico 12243 • yonico 12243q • yonico 12249 • yonico 12335 • yonico 12336 • yonico 12338 • yonico 12343 • yonico 12345 • yonico 12350 • yonico 12432. This conversion kit allows 1/4″ plywood (actual 5. ) Note this kit contains the 2 blades only. Standard rail & stile router bits create 1/4″ grooves for the center panel. 5mm plywood use yonico 12202 rail & stile conversion kit. The rail and stile bits must be purchased separately. (For 5. 2mm) to be used as center panels for rail & stile doors.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.