21 Best 5c Collets in 2019

 

15 PC 18 to 1 5C ROUND Collet Set by 16ths Harden Machinist Tool 0006 TIR #ad

15 PC 1/8” to 1” 5C ROUND Collet Set by 16ths Harden Machinist Tool .0006″ TIR

15 PC 1/8” to 1” 5C ROUND Collet Set by 16ths Harden Machinist Tool .0006″ TIR #ad - 0006″ tir outside thread 1-1/4″-20 inside thread 1″-24. Made of highest grade steel available precision ground to close tolerance 0006″ tir. Quantity 1 set (15 pieces per order) shipping weight 9 lbs. Hardened and ground throughout. 15 piece 5c collet set sizes 1/8 to 1″ by 16ths.

 

5C Collet Chuck Boring Grinding Milling Lathe 5 #ad

5C Collet Chuck Boring Grinding Milling Lathe 5″

5C Collet Chuck Boring Grinding Milling Lathe 5″ #ad - 0006 inch. These come in a black oxide finish and includes wrench and mounting bolts. It can handle up to 6,000 rpm and is of the 2 pinion low profile type. This 5 inch 5c collet chuck has a collet range of 1/16 inch-1/18 inch. It can be used for turning, facing, boring, grinding and milling. The tir is 0.

 

716 5C Round Collet #ad

7/16″ 5C Round Collet

7/16″ 5C Round Collet #ad - Size 7/16″. Round 5c collets are used for holding tools in many milling machines, spin jigs, and collet vises. For holding round tools and stock.

 

High Precision 15 Pc Round 5C Collet Set 18-1 x 16ths Hardened TIR 00005 Lathe #ad

High Precision 15 Pc. Round 5C Collet Set 1/8-1″ x 16ths Hardened T.I.R. 0.0005″ Lathe

High Precision 15 Pc. Round 5C Collet Set 1/8-1″ x 16ths Hardened T.I.R. 0.0005″ Lathe #ad - High precision 15 piece fractional 5c collet set includes 1/8-1″ x 16th increments. Guaranteed tir 00005″. Made of high grade tool steel hardened and precision ground. Our part# all-41282. Threaded internally and externally.

 

Indexing Spin Jigs 5C Drilling Mill Lathe Grinding Collet 5C Fixture Drill #ad

Indexing Spin Jigs 5C Drilling Mill Lathe Grinding Collet 5C Fixture Drill

Indexing Spin Jigs 5C Drilling Mill Lathe Grinding Collet 5C Fixture Drill #ad - Capacity for standard 5c collet 1-1/8″. 5c indexing spin jigs. 36 indexing holes plate10 vernier indexing holes. Quantity 1 over all dim 9-1/2″ x 5″ x 5-1/4″. Height of center 2-3/4″ spindle travel 2-1/16″.

 

5C-CC Lever Collet Closer for 5C Collets #ad

5C-CC Lever Collet Closer for 5C Collets

5C-CC Lever Collet Closer for 5C Collets #ad - . Lever collet closer is faster and easier to use than a ring closer. 5c collet blocks are great for fast, short run, set-ups.

 

Lyndex 5C-WRENCH 5C Collet Wrench #ad

Lyndex 5C-WRENCH 5C Collet Wrench

Lyndex 5C-WRENCH 5C Collet Wrench #ad - Align the 3 prongs into the top portion of the collet and turn the wrench to thread the collet into your machine. . Lyndex-nikken 5c wrench is designed to provide a simple solution for installing 5c collets into your designated machine.

 

5C Collet Fixture HV Horizontal Vertical Model C #ad

5C Collet Fixture H/V Horizontal Vertical Model C

5C Collet Fixture H/V Horizontal Vertical Model C #ad - This fits any 5c collet up to 1-1/18″ and used in horizontal or vertical position. This 5c h/v collet fixture has vertical base size of 5×3-5/8″, vertical height of 4″, horizontal base size of 5×4″ and horizontal height of 3-5/8″.

 

JET 650014 CS-5C 16-piece 5-C Collet Set 18 - 1-116 by 116ths for Lathes and Grinders #ad

JET 650014 CS-5C, 16-piece 5-C Collet Set 1/8″ – 1-1/16″ by 1/16ths for Lathes and Grinders

JET 650014 CS-5C, 16-piece 5-C Collet Set 1/8″ – 1-1/16″ by 1/16ths for Lathes and Grinders #ad - 126-piece set. For lathes and toll and cutter grinder applications. Precision hardened and ground.

 

5C Collet Index Fixture #ad

5C Collet Index Fixture

5C Collet Index Fixture #ad - Quantity 1 shipping weight 18 can be used horizontal and vertical. 5c collet index fixture. Base in horizontal 61 x 403″ base in vertical 61 x 472″. 5c heavy duty collet fixture. Collets are held dead length quick acting lever.

 

HHIP 3900-4715 5C Collet Chuck D1-4 Spindle 6000 RMP #ad

HHIP 3900-4715 5C Collet Chuck, D1-4 Spindle, 6,000 RMP

HHIP 3900-4715 5C Collet Chuck, D1-4 Spindle, 6,000 RMP #ad - 13 lbs max. . Rpm 6,000. Hhip 5c collet chuck is used for turning, facing, boring, grinding and milling on center lathes and grinding machines key-operated scroll provides a uniform distortion-free clamping of workpieces and low collet exchange times designed for use with 5c collets chuck wrench included product specifications spindle d1-4 chuck size 5″ collet capacity 1/16-1-1/8″ weight approx.

 

5C Collet Block Chuck Hex Square Closer Rings Milling Lathe Grinder #ad

5C Collet Block Chuck Hex Square Closer Rings Milling Lathe Grinder

5C Collet Block Chuck Hex Square Closer Rings Milling Lathe Grinder #ad - Capacity for standard 5c collet 1/16 ~ 1-1/16. 5c hex & square collet block chucks. Made of steel hardened and ground to 0005″. Quantity 1. 5 pc square, hex, quick acting ring & lever collet closer cam operated.

 

Heavy Duty 5C Collet Chuck Dead Length Fixture Vertical Horizontal Mill #ad

Heavy Duty 5C Collet Chuck Dead Length Fixture Vertical Horizontal Mill

Heavy Duty 5C Collet Chuck Dead Length Fixture Vertical Horizontal Mill #ad - Base in horizontal 61 x 403″ base in vertical 61 x 472″. 5c heavy duty collet fixture. Quantity 1 shipping weight 18 can be used horizontal and vertical. Collets are held dead length quick acting lever. Hardened and ground spindle two position heavy casting.

 

3 Precision 5c Step Collet Lathe Fixture Machinist Tool #ad

3” Precision 5c Step Collet Lathe Fixture Machinist Tool

3” Precision 5c Step Collet Lathe Fixture Machinist Tool #ad - Recommended max depth of cavity 1″. Soft head for easy machining heat treated tool steel collet shank precisely ground all over. Dia 3″ thickness 1-1/8″ head width 1-3/32″. 3” precision 5c collet. Quantity1 shipping weight 265 lbs.

 

End Mill Grinding Fixtures 5C Collets 2-12x4-12 #ad

End Mill Grinding Fixtures 5C Collets 2-1/2″x4″-1/2″

End Mill Grinding Fixtures 5C Collets 2-1/2″x4″-1/2″ #ad - Clearance and relief angles are built into base. This end mill grinding fixtures has solid 2-1/2″ x 4-1/2″ base ground. It features grinds 2,3,4,5,6 and 12 fluted end mills and shell mills, faces only.

 

SIERRA AMERICAN 5C Collet Rack - 76 Holes - Model  5C - 76 #ad

SIERRA AMERICAN 5C Collet Rack – 76 Holes – Model : 5C – 76

SIERRA AMERICAN 5C Collet Rack – 76 Holes – Model : 5C – 76 #ad - Angled seat area. Made from high impact plastic. Holds collets secure with tapered seat.

 

TTC Hex for 5C Collets - Size Hex #ad

TTC Hex for 5C Collets – Size: Hex

TTC Hex for 5C Collets – Size: Hex #ad - Quick acting collet closer (#cb5l) is interchangeable on either collet block. For simplified set-ups on drill presses, milling machines, lathes and surface grinders. Made of high quality tool steel, hardened. Capacity 1/16″ thru 1-1/8″. Precision ground, parallel and square to within 0005″.

 

Centaur 5CR56 5C Round Collet 78 Size 2 QC 58 Tap #ad

Centaur 5CR56 5C Round Collet, 7/8″ Size, #2 QC 5/8 Tap

Centaur 5CR56 5C Round Collet, 7/8″ Size, #2 QC 5/8 Tap #ad - External thread = 1234 x 20 rh. Internal thread = 1047 x 24 rh. Hardened and ground.

 

5C HEX SQUARE Closer Rings Collet Block Chuck Milling Lathe Surface Grinder 5 PC #ad

5C HEX SQUARE Closer Rings Collet Block Chuck Milling Lathe Surface Grinder 5 PC

5C HEX SQUARE Closer Rings Collet Block Chuck Milling Lathe Surface Grinder 5 PC #ad - Made of steel hardened and ground to. 0005″. For fast set ups on milling, lathe, surface grinder & drill presses for parallel, square or hex shapes as well as for cross-hole drilling at 60º, 90º or 120º.

 

0-35 INDEXING SPIN JIGS Fixture Drill Milling Lathe Grinding 5C Collet 1-18 #ad

0-35 INDEXING SPIN JIGS Fixture Drill Milling Lathe Grinding 5C Collet 1-1/8″

0-35 INDEXING SPIN JIGS Fixture Drill Milling Lathe Grinding 5C Collet 1-1/8″ #ad - Height of center 2-3/4″ spindle travel 2-1/16″. Standard 5c collet capacity 1-1/8″. 36 indexing holes plate 10 vernier indexing holes. Quantity 1 unit overall dim 9-1/2″ x 5″ x 5-1/4″. 5c indexing spin jigs.

 

5C Collet Chuck Indexer Horizontal Vertical Fixture #ad

5C Collet Chuck Indexer Horizontal Vertical Fixture

5C Collet Chuck Indexer Horizontal Vertical Fixture #ad - 0008 inch, a spindle center line parallelism of max variation. 0008 inch, and a base to face squareness of max variation. This indexer utilizes 5c collets and uses single lever action to activate. 0004 inch, a cylindrical center bore (per 1 inch) concentricity of max variation. It has 24 index locations and 15 degree increments. 0008 inch. 0008 inch, a lateral offset of center slot of dividing spindle of max variation. 0008 inch, a center slot to dividing spindle concentricity of max variation. The convenient ratchet is mounted on the front. This 5c h/v collet indexer has a dividing spindle concentricity of max variation.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.