21 Best and Coolest Channellock Tools

 

Channellock 8WCB WideAzz Adjustable Wrench with Code Blue Grips 1-12-Inch Opening- 8-Inch Overall Length Size 8 in Model 8WCB Tools Hardware store

Channellock 8WCB WideAzz Adjustable Wrench with Code Blue Grips, 1-1/2-Inch Opening- 8-Inch Overall Length Size: 8 in., Model: 8WCB, Tools & Hardware store

Channellock 8WCB WideAzz Adjustable Wrench with Code Blue Grips, 1-1/2-Inch Opening- 8-Inch Overall Length Size: 8 in., Model: 8WCB, Tools & Hardware store - Same capacity as a 12-inch wrench. Code blue grips are designed for durability and comfort. Measurement scales (in on front mm on reverse) are handy for sizing nuts, pipe and tube diameters. Four thread knurl and non-protruding jaws provide greater capacity minimal head width improves. Longer jaws grip better, avoiding slippage or nut round off.

 

Channellock 908 Wiring Tool

Channellock 908 Wiring Tool

Channellock 908 Wiring Tool - Lean plier nose pulls and loops wire. Laser etched marking for lasting indication of wire gauges. Made in the usa. Crimps insulated and non-insulated wire. Cuts bolt sizes 10-24, 6-32, 8-32, 10-32, 4-40. Cuts and strips awg 10-22.

 

Channellock 436 6-Inch Diagonal Cutting Plier Size  Model 436 Tools Hardware store

Channellock 436 6-Inch Diagonal Cutting Plier Size: , Model: 436, Tools & Hardware store

Channellock 436 6-Inch Diagonal Cutting Plier Size: , Model: 436, Tools & Hardware store - Box joint design. Perfectly mated cutter, heat treated to hold it’s edge. Channellock blue comfort grips. 100-percent guaranteed against breakage and failure. Polished high carbon drop forged steel.

 

Channellock Tool Roll-5 Professional Tool Set with Tool Roll 5-Piece

Channellock Tool Roll-5 Professional Tool Set with Tool Roll, 5-Piece

Channellock Tool Roll-5 Professional Tool Set with Tool Roll, 5-Piece - Laser heat-treated teeth and cutting edges grip better and last longer. Set includes 95″ & 65″ tongue & groove, 7″ long nose plier with cutter, 7″ hl dig cutting plier and 8″ combination linemen’s plier, tool roll. High-carbon c1080 steel for superior performance on the job and specially coated for ultimate rust prevention. Made in the usa.

 

Channellock Toolbox

Channellock Toolbox

Channellock Toolbox - 0″ h. Metal latches. 22″. X 9. Channellock toolbox. Rubber corners. Heavy-duty handle with soft grip. This toolbox can be locked onto the top of channellock model no. 22″ l. X 10. 5″ w. 354501 to act as 1 unit. Removable top organizer with rubber dividers.

 

Channellock TOOLROLL-3  5-Piece Plier Set in Handy Tool Roll

Channellock TOOLROLL-3 5-Piece Plier Set in Handy Tool Roll

Channellock TOOLROLL-3 5-Piece Plier Set in Handy Tool Roll - 3017, 8″ long nose plier. 337, 7″ side cutter plier. 526, 6″ slip joint plier. 420, 95″ tongue and groove plier. 430, 10″ tongue and groove plier.

 

Channellock Tool Roll-53 E-Series Plier Set with Tool Roll 5-Piece

Channellock Tool Roll-53 E-Series Plier Set with Tool Roll, 5-Piece

Channellock Tool Roll-53 E-Series Plier Set with Tool Roll, 5-Piece - Laser heat-treated teeth and cutting edges grip better and last longer. Xlt xtreme leverage technology means considerably less force required to cut than traditional high leverage. High-carbon c1080 steel for superior performance on the job and specially coated for ultimate rust prevention. Set includes 8″ long nose plier, 65″, 95″ & 12″ tongue & groove, 75″ end cutting plier, 95″ xlt linemen’s, 7″ diag cutting plier, and 8″ adj wrench. Made in the usa.

 

Channellock 87 888-Inch Compact Rescue Tool

Channellock 87 8.88-Inch Compact Rescue Tool

Channellock 87 8.88-Inch Compact Rescue Tool - Made in the usa. Standard battery cables are no match for its cutting power. Spanner wrench tightens and loosens up to 5″ hose couplings. Shuts off gas safety valves and pries open windows and doors. 30% lighter than the 89 rescue tool for compact storage.

 

Channellock 528 2 Pack 8-Inch Slip Joint Plier Size 2-Pack Model 528 Tools Hardware store

Channellock 528 2 Pack 8-Inch Slip Joint Plier Size: 2-Pack, Model: 528, Tools & Hardware store

Channellock 528 2 Pack 8-Inch Slip Joint Plier Size: 2-Pack, Model: 528, Tools & Hardware store - Permalock fastener eliminates nut and bolt failur. Channellock blue grips for comfort. Serrated jaw for a firm grip. No tool box is complete without channellock slip joint pliers. They’re versatile, easy to use and come with legendary strength and reliability.

 

Channellock 212 4-14-Inch Jaw Capacity Plier for Oil Filters PVC and Sink Strainers Size 12in Model 212 Tools Hardware store

Channellock 212 4-1/4-Inch Jaw Capacity Plier for Oil Filters PVC and Sink Strainers Size: 12in, Model: 212, Tools & Hardware store

Channellock 212 4-1/4-Inch Jaw Capacity Plier for Oil Filters PVC and Sink Strainers Size: 12in, Model: 212, Tools & Hardware store - This plier’s jaw capacity is 2-3/4 in to 4-1/4 in. They have right angle teeth that grip in all directions for maximum bite. Channellock blue grips for comfort. Permalock fastener eliminates nut and bolt failure.

 

Channellock Toolbox by Channellock

Channellock Toolbox by Channellock

Channellock Toolbox by Channellock - Channellock toolbox. Custom heat-treated alloy steel blades. Made in the usa. Precision machined tip for a precise fit. Black oxide coated for corrosion resistance.

 

Channellock 85 Fence Tool

Channellock 85 Fence Tool

Channellock 85 Fence Tool - . Staple starter and puller. Hammer on jaw, wire stretcher, splicers and two cutters.

 

Channellock Tool Roll-53 E-Series Plier Set with Tool Roll 5-Piece by Channellock

Channellock Tool Roll-53 E-Series Plier Set with Tool Roll, 5-Piece by Channellock

Channellock Tool Roll-53 E-Series Plier Set with Tool Roll, 5-Piece by Channellock - 5 xlt linemen’s, 7 diag cutting plier, and 8 adj wrenchxlt xtreme leverage technology means considerably less force required to cut than traditional high leveragelaser heat-treated teeth and cutting edges grip better and last longerhigh-carbon c1080 steel for superior performance on the job and specially coated for ultimate rust preventionmade in the usa. Set includes 8 long nose plier, 6. 5 & 12 tongue & groove, 7. 5, 9. 5 end cutting plier, 9.

 

Channellock 909 Crimping Tool with Cutter

Channellock 909 Crimping Tool with Cutter

Channellock 909 Crimping Tool with Cutter - Laser heat-treated edges last longer. Designed for crimping of both insulated and non-insulated solderless connections and terminals. Cuts and crimps 10-22 awg wire. Made in the usa. High-carbon c1080 steel for superior performance on the job and electronic coating for ultimate rust prevention.

 

Channellock GP-7 Blue Tool Roll Kit 420 426 326 436 806W 61CB

Channellock GP-7 Blue Tool Roll Kit: 420, 426, 326, 436, 806W, 61CB

Channellock GP-7 Blue Tool Roll Kit: 420, 426, 326, 436, 806W, 61CB - Set includes 65″ & 95″ tongue & groove plier, 6″ diag cutting plier, 6″ long nose, 6″ adj wrench, and 6n1 screwdriver. Channellock blue grips for comfort. Laser heat-treated teeth and cutting edges grip better and last longer. High-carbon c1080 steel for superior performance on the job and electronic coating for ultimate rust prevention.

 

Channellock TOOL ROLL-52 Plier Set with Tool Roll 5-Piece

Channellock TOOL ROLL-52 Plier Set with Tool Roll, 5-Piece

Channellock TOOL ROLL-52 Plier Set with Tool Roll, 5-Piece - Xlt xtreme leverage technology means considerably less force required to cut than traditional high leverage. Made in the usa. Laser heat-treated teeth and cutting edges grip better and last longer. Set includes 95″ griplock tongue & groove, 8 xlt diag cutting plier, 8″ hl combination plier, 8″ long nose, and 8″ end cutting plier. Ergonomically designed offset head for greater leverage.

 

Channellock Tool Roll-4 Professional Tool Set with Tool Roll 5-Piece

Channellock Tool Roll-4 Professional Tool Set with Tool Roll, 5-Piece

Channellock Tool Roll-4 Professional Tool Set with Tool Roll, 5-Piece - Channellock blue grips for comfort. Set includes 95″ & 10″ tongue & groove, 7″ hl diag plier, 8″ long nose and 6n1 screwdriver. High-carbon c1080 steel for superior performance on the job and specially coated for ultimate rust prevention. Laser heat-treated teeth and cutting edges grip better and last longer.

 

Channellock TOOL ROLL-2 Technicians Plier Set with Tool Roll 5-Piece

Channellock TOOL ROLL-2 Technician’s Plier Set with Tool Roll, 5-Piece

Channellock TOOL ROLL-2 Technician’s Plier Set with Tool Roll, 5-Piece - Channellock blue grips for comfort. Channellock uses high-carbon c1080 steel for superior performance on the job and specially coated for ultimate rust prevention. Laser heat-treated teeth and cutting edges grip better and last longer. Set includes 65″ & 95″ tongue & groove, 95″ crimping plier, 775″ hl dig cutting plier and 8″ long nose.

 

Channellock TOOL ROLL-6LC 6pc Little Champ Precision Plier Set with XLT Technology High Leverage

Channellock TOOL ROLL-6LC 6pc Little Champ Precision Plier Set with XLT Technology, High Leverage

Channellock TOOL ROLL-6LC 6pc Little Champ Precision Plier Set with XLT Technology, High Leverage - Xlt xtreme leverage technology requires considerably less force to cut and grab. Made in usa. Slimmer, lighter, better balanced design. Spring loaded for ease of use. Set includes 4″ hl diag cutting plier, 4″ hl end cutting plier, 5″ hl long nose plier w/cutter, 6″ snipe nose plier, 45″ slip joint plier, 45″ tongue & groove.

 

Channellock 909 Crimping Tool with Cutter Size 1-Pack Model 909 Tools Hardware store

Channellock 909 Crimping Tool with Cutter Size: 1-Pack, Model: 909, Tools & Hardware store

Channellock 909 Crimping Tool with Cutter Size: 1-Pack, Model: 909, Tools & Hardware store - The channellock 909 9-1/2-inch crimping plier has a sleek nose design gets into tight places and a laser heat-treated mating edge makes this the only crimper you’ll ever need. Perfect for both insulated and non-insulated solderless connections and terminals.

 

Channellock CBR-8 Code Blue Tool Roll 8 Piece

Channellock CBR-8 Code Blue Tool Roll, 8 Piece

Channellock CBR-8 Code Blue Tool Roll, 8 Piece - Set includes 95″ & 10″ tongue & groove, 95″ xlt linemen’s, 95″ cable cutter, 95″ crimping plier, 85″ hd long nose, and 825″ hl diagonal cutting plier. Laser heat-treated teeth and cutting edges grip better and last longer. Channellock uses high-carbon c1080 steel for superior performance on the job and specially coated for ultimate rust prevention. Code blue grips are designed for durability and comfort. Xltâ„¢ xtreme leverage technology means considerably less force required to cut than traditional high leverage.