21 Best Chisel Blades

 

Narex Lathe Wood Turning Right Bevel Skew Chisel 4 mm X 14 mm X 105 mm Blade Alloyed Tool Steel 60 Hrc 817910

Narex Lathe Wood Turning Right Bevel Skew Chisel 4 mm X 14 mm X 105 mm Blade Alloyed Tool Steel 60 Hrc 817910

Narex Lathe Wood Turning Right Bevel Skew Chisel 4 mm X 14 mm X 105 mm Blade Alloyed Tool Steel 60 Hrc 817910 - Blades are heat treated allow tool steel and hardened to hrc 60 and will hold an excellent edge. This lathe tool is made by a small tool manufacturer in the czech republic. Right bevel skew chisel blade is 4 mm (3/16″) thick by 14 mm (9/16″) wide by 105 mm (425″) long. Overall length of tool is 345 mm (14″). Handles are natural varnished european beech wood.

 

4 in Chisel Blade for Air Scraper

4 in. Chisel Blade for Air Scraper

4 in. Chisel Blade for Air Scraper - Quantity 5000. Coated finish increases withdrawal strength. Fits bostitch tools sb150slbc.

 

Japanese Style Chisel Blade  Made of High Speed Steel Width of Blade  42mmabt 17 Inch

Japanese Style Chisel, Blade : Made of High Speed Steel, Width of Blade : 42mm(abt 1.7 Inch)

Japanese Style Chisel, Blade : Made of High Speed Steel, Width of Blade : 42mm(abt 1.7 Inch) - Even for alminum, scagliolea can be used. Easy to grind. Width of blade 42mm (abt 17inch). Blade made from high speed steel, hard and tough. Made in japan, high quatlity.

 

4 in Chisel Blade for Air Scraper

4 in. Chisel Blade for Air Scraper

4 in. Chisel Blade for Air Scraper - Handles are oiled european beech with ergonomic octagonal cross section. Set includes single bevel straight, single bevel left skew, 3 gouges and a dual bevel knife. Comes in retail packaging. This 6 piece carving set is manufactured by small tool maker in czech republic. All chisels blades are made from hardened highly allowed cr-mn steel and heat treated to hrc 58.

 

1” Wood Chisel Blades Sharp Steel Legend Misc Chisels LGND-821882 076335821825

1″” Wood Chisel Blades Sharp Steel Legend Misc. Chisels LGND-821882 076335821825

1″” Wood Chisel Blades Sharp Steel Legend Misc. Chisels LGND-821882 076335821825 - Overall length of tool is 345 mm (14″). Straight chisel blade is 4 mm (3/16″) thick by 14 mm (9/16″) wide by 105 mm (425″) long. 1″” wood chisel blades sharp steel upc 076335821825. This lathe tool is made by a small tool manufacturer in the czech republic. The 50d includespack of lenox 50d titanium edge gold bladesblade dispenser.

 

Multi Purpose Power Sharpener Drill Bit Knife Scissor Plane Chisel Blade Knife

Multi Purpose Power Sharpener Drill Bit Knife Scissor Plane Chisel Blade Knife

Multi Purpose Power Sharpener Drill Bit Knife Scissor Plane Chisel Blade Knife - Durable multi task power sharpener high speed drill sharpener knife & scissor sharpener chisel & plane sharpener input power 70 watt @ 110 volt max, speed 6700 rpm (no load) max. Wheel diameter 1/4″, 2″ drill diameter 7/64″ ~ 3/8″ sharpens straight edge chisel and plane blades from 1/4″ ~ 2″ wide over all dimension 8″ x 8″ x 8″ 5. 5′ ul power cord.

 

AutoMach 45mm Round Chisel Blade for AutoMach Carver CH-80

AutoMach 45mm Round Chisel Blade for AutoMach Carver CH-80

AutoMach 45mm Round Chisel Blade for AutoMach Carver CH-80 - Width of blade 36mm(14inch). Even for alminum, scagliolea can be used. Blade made from high speed steel. Maidd in japan and hard and tough. 45mm gouge.

 

Narex Lathe Wood Turning Parting Tool Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 817210

Narex Lathe Wood Turning Parting Tool Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 817210

Narex Lathe Wood Turning Parting Tool Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 817210 - Blades are heat treated allow tool steel and hardened to hrc 60 and will hold an excellent edge. Overall length of tool is 345 mm (14″). Handles are natural varnished european beech wood. This lathe tool is made by a small tool manufacturer in the czech republic. Parting tool chisel blade is 4 mm (3/16″) thick by 14 mm (9/16″) wide by 105 mm (425″) long.

 

4 in Chisel Blade for Air Scraper

4 in. Chisel Blade for Air Scraper

4 in. Chisel Blade for Air Scraper - This replacement chisel blade is a must-have for workshop masonry or home bathroom/kitchen remodeling projects. Chisel shank 15mm hex. Blade bevel angle 45degree 4 inch chisel blade for air scraper hbft# 69237 material carbon steel blade width (in. The chisel blade features a 45 degree bevel angle to get quality breakage. 4 inch chisel blade for air scraper chip and chisel mortar with this replacement chisel blade this chisel is a great replacement blade for your hammer drill to break up tile and stone the heat treated carbon steel chisel is built for edging, chipping and channeling hard tile and mortar. Hardened, heat-treated carbon steel with black oxide finish. Blade width 4 inch. ) 4 inch product length 9-1/16 inch shipping weight 1. 50 pound warranty 90 day.

 

Japanese Style Chisel Blade  Made of High Speed Steel Width of Blade  36mmabt 14

Japanese Style Chisel, Blade : Made of High Speed Steel, Width of Blade : 36mm(abt 1.4″)

Japanese Style Chisel, Blade : Made of High Speed Steel, Width of Blade : 36mm(abt 1.4″) - Width of blade 36mm(14inch). Easy to grind. Blade made from high speed steel. Maidd in japan and hard and tough. Even for alminum, scagliolea can be used.

 

Narex Lathe Wood Turning Parting Gouge Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 818110

Narex Lathe Wood Turning Parting Gouge Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 818110

Narex Lathe Wood Turning Parting Gouge Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 818110 - Blades are heat treated allow tool steel and hardened to hrc 60 and will hold an excellent edge. This lathe tool is made by a small tool manufacturer in the czech republic. Parting gouge chisel blade is 4 mm (3/16″) thick by 14 mm (9/16″) wide by 105 mm (425″) long. Overall length of tool is 345 mm (14″). Handles are natural varnished european beech wood.

 

Self-Centering Side Clamping Sharpening Honing Guide Jig for Chisels and Blades from 116 to 3 Wide HG

Self-Centering Side Clamping Sharpening Honing Guide Jig for Chisels and Blades from 1/16″ to 3″ Wide HG

Self-Centering Side Clamping Sharpening Honing Guide Jig for Chisels and Blades from 1/16″ to 3″ Wide HG - Sharpens chisels and plane irons from 1/16″ to full 3″ wide. Can be used with natural, man-made or diamond stones. Side clamping honing guide securely holds wide variety of chisels and plane irons to attain sharp, precise and square edges. Center wheel allows pivoting blades to put camber on plane blades. Ground and hardened steel center wheel easily glides across sharpening stones.

 

4 in Chisel Blade for Air Scraper

4 in. Chisel Blade for Air Scraper

4 in. Chisel Blade for Air Scraper - Handle is natural varnished european beech wood. Blade is heat treated high tool steel and hardened to hrc 64 and will hold an excellent edge. This lathe tool is made by a small tool manufacturer in the czech republic. Overall length of tool is 465 mm (19″). Right hand skew chisel blade is 4 mm (3/16″) thick by 18 mm (3/4″) wide by 150 mm (6″) long.

 

Plane Iron Chisel Blade Sharpener clever yet simple tool for holding a chisel or plane iron at the proper angle when

Plane Iron & Chisel Blade Sharpener /clever yet simple tool for holding a chisel or plane iron at the proper angle when

Plane Iron & Chisel Blade Sharpener /clever yet simple tool for holding a chisel or plane iron at the proper angle when - A clever yet simple tool for holding a chisel or plane iron at the proper angle when sharpening,. Knurled head screw tightens to firmly hold tools in place during sharpening. Wide jaws on top holds plane irons at 25° and handles widths up to 3 1/8″. Narrow inner jaws handle 25° or 30° angles on wood chisels 1-7/8″ width capacity.

 

Narex Full Size Professional Lathe Wood Turning Parting Tool Chisel 4 mm x 18 mm x 150 mm High Speed Tool Steel Blade 465 mm Overall Length 64 HRc 818203

Narex Full Size Professional Lathe Wood Turning Parting Tool Chisel 4 mm x 18 mm x 150 mm High Speed Tool Steel Blade 465 mm Overall Length 64 HRc 818203

Narex Full Size Professional Lathe Wood Turning Parting Tool Chisel 4 mm x 18 mm x 150 mm High Speed Tool Steel Blade 465 mm Overall Length 64 HRc 818203 - Handle is natural varnished european beech wood. Overall length of tool is 465 mm (19″). Parting tool chisel blade is 4 mm (3/16″) thick by 18 mm (3/4″) wide by 150 mm (6″) long. This lathe tool is made by a small tool manufacturer in the czech republic. Blade is heat treated high tool steel and hardened to hrc 64 and will hold an excellent edge.

 

4 in Chisel Blade for Air Scraper

4 in. Chisel Blade for Air Scraper

4 in. Chisel Blade for Air Scraper - This 6 piece carving set is manufactured by small tool maker in czech republic. Handles are oiled european beech with ergonomic octagonal cross section. All chisels blades are made from hardened highly allowed cr-mn steel and heat treated to hrc 58. Set includes single bevel straight, single bevel left skew, 3 gouges and a dual bevel knife. Comes in retail packaging.

 

Narex Lathe Wood Turning Double Bevel Skew Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 817110

Narex Lathe Wood Turning Double Bevel Skew Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 817110

Narex Lathe Wood Turning Double Bevel Skew Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 817110 - Handles are natural varnished european beech wood. Blades are heat treated allow tool steel and hardened to hrc 60 and will hold an excellent edge. This lathe tool is made by a small tool manufacturer in the czech republic. Overall length of tool is 345 mm (14″). Straight chisel blade is 4 mm (3/16″) thick by 14 mm (9/16″) wide by 105 mm (425″) long.

 

Stanley 16-973 14-Inch Wide FatMax Short Blade Chisel

Stanley 16-973 1/4-Inch Wide FatMax Short Blade Chisel

Stanley 16-973 1/4-Inch Wide FatMax Short Blade Chisel - 9 inches in length 1/4-inch blade width limited lifetime warranty. Chisel designed for precise woodworking. Hardened, tempered, high-chrome carbon alloy steel blade for edge retention. Break-resistant, ergonomic handle steel striking cap for use with steel-headed hammers. Includes blade guard to protect work edges can be wall mounted.

 

Stanley 16-970 FatMax Short Blade Chisel Set 3-Piece

Stanley 16-970 FatMax Short Blade Chisel Set, 3-Piece

Stanley 16-970 FatMax Short Blade Chisel Set, 3-Piece - Each blade etched with blade size for easy reference. Hardened and tempered high chrome alloy steel blade for edge retention. Patented, ergonomically designed, break-resistant, bi-material grip handle. Limited lifetime warranty. An ideal chisel set for general repair use.

 

Japanese Style Chisel Blade  Made from Shirogami steel Width of Blade3mmabt 01

Japanese Style Chisel, Blade : Made from Shirogami steel, Width of Blade:3mm(abt 0.1″)

Japanese Style Chisel, Blade : Made from Shirogami steel, Width of Blade:3mm(abt 0.1″) - Easy to grind. Made in japan and high quality. Made from shirogami steel hard and tough. Blade width 3mm(01inch).

 

12 Robert Sorby 810 Skew Chisel Blade

1/2″ Robert Sorby #810 Skew Chisel Blade

1/2″ Robert Sorby #810 Skew Chisel Blade - Grind flat handle grivory. Edge angle 15 degrees steel 1095 cro-van. Blade length 7″ overall length 12-1/2″. Knife made in the usa, sheath made in taiwan. Legend 3/4” wood chisel blades sharp steel new upc 076335821887. Used by all branches of military and service members great for collectors and outdoor services tested to ensure quality and durability.