21 Best Thumb Screws in 2019

 

Retainers Thumbscrew 10 #ad

Retainers, Thumbscrew, (10)

Retainers, Thumbscrew, (10) #ad - Surface mounts on inside of door. Thumbscrew retainer firmly holds glass panels in wood frame doors. Sold in bags of 10. Thumbscrew adjusts to various door or glass thicknesses. Bronze finished steel with mounting screw and plastic tip. .

 

Hard-to-Find Fastener 014973323943 Thumb Screws 14-20 x 1-Inch #ad

Hard-to-Find Fastener 014973323943 Thumb Screws, 1/4-20 x 1-Inch

Hard-to-Find Fastener 014973323943 Thumb Screws, 1/4-20 x 1-Inch #ad - We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. We also sell coated and stainless products for additional rust resistance.

 

PART  9709194 OR AP3952642 GENUINE FACTORY OEM MIXER BLACK THUMB SCREW FOR KITCHENAID WHIRLPOOL KitchenAid #ad

PART # 9709194 OR AP3952642 GENUINE FACTORY OEM MIXER BLACK THUMB SCREW FOR KITCHENAID WHIRLPOOL KitchenAid

PART # 9709194 OR AP3952642 GENUINE FACTORY OEM MIXER BLACK THUMB SCREW FOR KITCHENAID WHIRLPOOL KitchenAid #ad - Part # 9709194 or ap3952642 genuine factory oem mixer black thumb screw for kitchenaid whirlpool. Genuine factory oem original for proper fit, easy installation and reliability. Color gray.

 

C&D 14 Thumbscrew Core Depressor Part No CD5050 #ad

C&D 1/4″ Thumbscrew Core Depressor (Part No. CD5050)

C&D 1/4″ Thumbscrew Core Depressor (Part No. CD5050) #ad - Attach to 1/4″ male flare to manage degree of flow for use with charging hose or with no depressor tip high quality brass compact design for tight spaces description thumbscrew core depressor 1/4″.

 

Stainless Steel Thumb Screw Plain Finish Knurled Head Flat Point 34 Length Fully Threaded 10-24 UNC Threads Pack of 5 #ad

Stainless Steel Thumb Screw, Plain Finish, Knurled Head, Flat Point, 3/4″ Length, Fully Threaded, #10-24 UNC Threads (Pack of 5)

Stainless Steel Thumb Screw, Plain Finish, Knurled Head, Flat Point, 3/4″ Length, Fully Threaded, #10-24 UNC Threads (Pack of 5) #ad - Thumb screws allow for simple “by-hand” installation. Tools not necessary for tightening or loosening. Stainless steel is suitable where formability and cost are important considerations. Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads. Knurled head provides extra grip for manual tightening.

 

Qualihome Aluminum Double Thumb Screw Turn Patio Sliding Door and Window Lock 2 Pack #ad

Qualihome Aluminum Double Thumb Screw Turn Patio Sliding Door and Window Lock (2 Pack)

Qualihome Aluminum Double Thumb Screw Turn Patio Sliding Door and Window Lock (2 Pack) #ad - These slider locks are perfect for patio doors, sliding glass doors, sliding windows etc. Heavy-duty aluminum construction, inner vinyl lining prevents scratching damage. Utilizes double thumbscrews to mount on window or sliding door track. Easy installation with no tools required. Additional gripping power securely locks window in closed or ventilating position.

 

Knurled Head Thumb Screws - Solid Brass Machine Screws - 14-20 x 2 QTY 25 #ad

Knurled Head Thumb Screws – Solid Brass Machine Screws – 1/4″-20 x 2″ QTY 25

Knurled Head Thumb Screws – Solid Brass Machine Screws – 1/4″-20 x 2″ QTY 25 #ad - Head diameter max 23/32″ head height 1/2″. Hardness 40-75 rockwell b. Thread pitch 20 per inch. Thread direction right hand. Body diameter (1/4″) max 02489, min 02408 (class 2a fit, ansi b11).

 

50 PCS NEW M4 x 8mm Toolless Thumb Screw Stainless Steel #ad

50 PCS NEW M4 x 8mm Toolless Thumb Screw Stainless Steel

50 PCS NEW M4 x 8mm Toolless Thumb Screw Stainless Steel #ad - Type toolless thumb screw thread size m4 p=0. 7 length8mm material stainless steel package includes 50 pcs new m4 x 8mm toolless thumb screw stainless steel.

 

Dealer License Plate Thumb Screw Screw size 14 14 x 12 Screw length 1-18 Qty 100 #ad

Dealer License Plate Thumb Screw, Screw size: 1/4″ (#14) x 1/2″, Screw length: 1-1/8″, Qty: 100

Dealer License Plate Thumb Screw, Screw size: 1/4″ (#14) x 1/2″, Screw length: 1-1/8″, Qty: 100 #ad - Dealer license plate thumb screw, screw size 1/4″ (#14) x 1/2″, screw length 1-1/8″, qty 100.

 

Glass Retainer Clips Thumbscrew Bag of 10 #ad

Glass Retainer Clips, Thumbscrew, Bag of 10

Glass Retainer Clips, Thumbscrew, Bag of 10 #ad - Thumbscrew adjusts to various door or glass thicknesses. Surface mounts on inside of door. Thumbscrew glass retainer clips firmly hold glass panels in wood frame doors. . 10 pack glass retainer clips. Finish antique copper. Mounting screws are not included.

 

303 Stainless Steel Thumb Screw Plain Finish Knurled Head 1-14 Length Fully Threaded 10-32 UNF Threads Made in US #ad

303 Stainless Steel Thumb Screw, Plain Finish, Knurled Head, 1-1/4″ Length, Fully Threaded, #10-32 UNF Threads, Made in US

303 Stainless Steel Thumb Screw, Plain Finish, Knurled Head, 1-1/4″ Length, Fully Threaded, #10-32 UNF Threads, Made in US #ad - Thumb screws are designed to be tightened and loosened by hand. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their wide use in practically every industry. The thumb screw head has a knurled surface, which gives a better gripping surface and makes it easier to tighten or loosen fasteners manually. A threaded fastener’s size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Plain stainless steel 303 provides better corrosion resistance than steel. They come in a variety of head styles, but each includes an easy-grip head which allows for simple “by-hand” installation. It has a longer head length than standard thumb screw for easier adjusting.

 

Tanz HAB-24 Caesar Hardware Worm Drive Hose Clamp with Thumb Screw #ad

Tanz HAB-24 Caesar Hardware Worm Drive Hose Clamp with Thumb Screw

Tanz HAB-24 Caesar Hardware Worm Drive Hose Clamp with Thumb Screw #ad - Tanz’s hose clamps have fine finish. They are suitable for a large number of uses and commonly used in industrial, electronic and automotive applications. The stainless steel material is ideal to be used in outdoor, fresh water and mildly corrosive applications. The clamp’s band is made from stainless steel 304 material. This is commonly used in small diameter applications such as air & fuel lines, installation in tight fitting or difficult to reach areas. They are used to connect flexible hose to dust hoods, blast gates and fittings. Hose clamps attach hoses to fittings to prevent flow leakage.

 

uxcell M4x8mm Zinc Plated Step Hand Screw Flat Knurled Head Thumb Screws Bolts 5 Pcs #ad

uxcell M4x8mm Zinc Plated Step Hand Screw Flat Knurled Head Thumb Screws Bolts 5 Pcs

uxcell M4x8mm Zinc Plated Step Hand Screw Flat Knurled Head Thumb Screws Bolts 5 Pcs #ad - Coating galvanized/zinc plated main color silver tone. Head style round knurled head material carbon steel package content 5 x knurled thumb screws. Thread style fully thread knurled head diameter 12mm/ 047″. Product name knurled thumb screws thread size m4 x 8mm/ 016″ x 03″ (dl) weight 26g. Thread pitch 07mm total length 16mm/ 063″.

 

Qty 1 M8 x 125 Thread 25 mm Long Stud Plastic Hurricane Head Metric Thumb Screw Knob #ad

Qty 1 M8 x 1.25 Thread 25 mm Long Stud Plastic Hurricane Head Metric Thumb Screw Knob

Qty 1 M8 x 1.25 Thread 25 mm Long Stud Plastic Hurricane Head Metric Thumb Screw Knob #ad - 25 mm projecting stud length. M8x125 mm steel thread (109 grade, zinc coated). Quantity of one (1) thumb screw included per order. Black nylon hurricane head style (32 mm diameter, 20 mm height).

 

1 X PART  9709196 GENUINE FACTORY OEM ORIGINAL MIXER ATTACHMENT THUMB SCREW FOR KITCHENAID #ad

1 X PART # 9709196 GENUINE FACTORY OEM ORIGINAL MIXER ATTACHMENT THUMB SCREW FOR KITCHENAID

1 X PART # 9709196 GENUINE FACTORY OEM ORIGINAL MIXER ATTACHMENT THUMB SCREW FOR KITCHENAID #ad - Genuine factory oem original for proper fit, easy installation and reliability. Color gray. Part number 9709196 (ap3921171) replaces 240374-2, 4176211 1426063, ah1156354, ea1156354, ps1156354.

 

Vitamix 18005 Set Screws 2 Ea Thumbscrews Fits Blending Station Models Vita Mix 69838 #ad

Vitamix 18005 Set Screws (2 Ea) Thumbscrews Fits Blending Station Models Vita Mix 69838

Vitamix 18005 Set Screws (2 Ea) Thumbscrews Fits Blending Station Models Vita Mix 69838 #ad - This as well as all items in our store are brand new and factory fresh (unless listed under used equipment category. 18005 thumbscrews set of (2) thumbscrews fits all blending station modelsfree shipping applies only to continental 48-states. Manufacturer vita-mix model no. ).

 

Hobart SLICER THUMB SCREW 108197-5 #ad

Hobart SLICER THUMB SCREW 108197-5

Hobart SLICER THUMB SCREW 108197-5 #ad - Slicer thumb screw. 108197-5. Hobart part. 2nd day air shipping is available from global appliance. Hobart.

 

Whirlpool 9709194 THUMB SCREW BLACK #ad

Whirlpool 9709194 THUMB SCREW (BLACK)

Whirlpool 9709194 THUMB SCREW (BLACK) #ad - Whirlpool 4kb25g1xco5, whirlpool 4kb25g1xer5, whirlpool 4kb25g1xga5, whirlpool 4kb25g1xmc5. Works with the following models whirlpool 4kb25g1xbu5, whirlpool 4kb25g1xby5. Thumb screw black.

 

Steel Thumb Screw Knurled Head M3-05 Metric Coarse Threads #ad

Steel Thumb Screw, Knurled Head, M3-0.5 Metric Coarse Threads

Steel Thumb Screw, Knurled Head, M3-0.5 Metric Coarse Threads #ad - Knurled thumb screw body 12l14 steel, black oxide finish. Jw winco’s knurled thumb screw. Rohs compliant. Din 464 knurled thumb screws are machined from solid bar.

 

New KitchenAid Stand Mixer Attachment Thumbscrew AP3952642 PS991938 9709194 #ad

New KitchenAid Stand Mixer Attachment Thumbscrew, AP3952642, PS991938, 9709194

New KitchenAid Stand Mixer Attachment Thumbscrew, AP3952642, PS991938, 9709194 #ad - Color gray. Genuine factory oem original for proper fit, easy installation and reliability. Part number 9709196 (ap3921171) replaces 240374-2, 4176211 1426063, ah1156354, ea1156354, ps1156354.

 

Brass Thumb Screw Knurled Head 075 Length Fully Threaded 14-20 UNC Threads Made in US Pack of 5 #ad

Brass Thumb Screw, Knurled Head, 0.75″ Length, Fully Threaded, 1/4″-20 UNC Threads, Made in US (Pack of 5)

Brass Thumb Screw, Knurled Head, 0.75″ Length, Fully Threaded, 1/4″-20 UNC Threads, Made in US (Pack of 5) #ad - The head has a diamond knurl, which also offers a gripping surface and makes it easier to tighten or loosen the fastener manually. . The thumb screw has a shoulder that provides a good bearing surface and also makes the head easier to grip. It resists corrosion and is nonmagnetic. Thumb screws are designed to be tightened and loosened by hand. They come in a variety of head styles, but each includes an easy-grip head that allows for simple “by-hand” installation. Free-machining brass, also known as alloy 360, is the most commonly used brass alloy. Combined with a precision-machined finish, it also offers a decorative gold color for a finished look. A threaded fastener’s size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.