23 Best and Coolest Steel Bandsaws

 

Magnate M62C38H6 Carbon Tool Steel Bandsaw Blade 62 Long - 38 Width 6 Hook Tooth

Magnate M62C38H6 Carbon Tool Steel Bandsaw Blade, 62″ Long – 3/8″ Width; 6 Hook Tooth

Magnate M62C38H6 Carbon Tool Steel Bandsaw Blade, 62″ Long – 3/8″ Width; 6 Hook Tooth - Steel). Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 2 inch, 5′ 2″ ) bandsaw blades suit the following models skil 3104 sears craftsman 103-24556, 2442 9ht2442n central machinery d0686-4bmf, 01629-icea mark 1 rexon bs-12 alltrade 1996bbr powerline dbs-12 jet dbs-12 black & decker (some models) grizzly g8976 12″ walker-turner 10″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 62 inch ( 5 ft. The picture depicted represents one blade the pricing is for one blade/package. E. It is also used for cutting plastics, aluminum, metals, and mild steel. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Pine, polar, fir and spruce. It can cut all types of woods and is especially ideal for soft woods i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced.

 

Magnate M91C18R18 Carbon Tool Steel Bandsaw Blade 91 Long - 18 Width 18 Raker Tooth

Magnate M91C18R18 Carbon Tool Steel Bandsaw Blade, 91″ Long – 1/8″ Width; 18 Raker Tooth

Magnate M91C18R18 Carbon Tool Steel Bandsaw Blade, 91″ Long – 1/8″ Width; 18 Raker Tooth - The picture depicted represents one blade the pricing is for one blade/package. Pine, polar, fir and spruce. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. This method will provide. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 7 inch, 7′ 7″ ) bandsaw blades suit the following models sears 12″ craftman if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Steel). Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 91 inch ( 7 ft. 2, if the owner’s manual is not available, refer to previous invoices. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It is also used for cutting plastics, aluminum, metals, and mild steel. Carbon tool steel bandsaw blades are made from high end carbon steel. It can cut all types of woods and is especially ideal for soft woods i.

 

Magnate M80C38R24 Carbon Tool Steel Bandsaw Blade 80 Long - 38 Width 24 Raker Tooth

Magnate M80C38R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/8″ Width; 24 Raker Tooth

Magnate M80C38R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/8″ Width; 24 Raker Tooth - It is also used for cutting plastics, aluminum, metals, and mild steel. It can cut all types of woods and is especially ideal for soft woods i. 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Carbon tool steel bandsaw blades are made from high end carbon steel. E. The picture depicted represents one blade the pricing is for one blade/package. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Steel). Pine, polar, fir and spruce. 2, if the owner’s manual is not available, refer to previous invoices. E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft.

 

Magnate M9975C14H6 Carbon Tool Steel Bandsaw Blade 99-34 Long - 14 Width 6 Hook Tooth

Magnate M99.75C14H6 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/4″ Width; 6 Hook Tooth

Magnate M99.75C14H6 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/4″ Width; 6 Hook Tooth - 2, if the owner’s manual is not available, refer to previous invoices. E. 3, cut your old bandsaw blade so that it lies flat on a level surf. Steel). Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. The picture depicted represents one blade the pricing is for one blade/package. It can cut all types of woods and is especially ideal for soft woods i. It is also used for cutting plastics, aluminum, metals, and mild steel. 3-3/4 inch, 8′ 3-3/4″ ) bandsaw blades suit the following models craftsman professional 14 general international 90-100 m1 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Carbon tool steel bandsaw blades are made from high end carbon steel. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 99-3/4 inch ( 8 ft. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. Pine, polar, fir and spruce.

 

Magnate M705C14R18 Carbon Tool Steel Bandsaw Blade 70-12 Long - 14 Width 18 Raker Tooth

Magnate M70.5C14R18 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/4″ Width; 18 Raker Tooth

Magnate M70.5C14R18 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/4″ Width; 18 Raker Tooth - Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Steel). Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360, 912 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Pine, polar, fir and spruce. E. Carbon tool steel bandsaw blades are made from high end carbon steel. 3, cut your old bandsaw blade so that it lies flat on a level sur. It can cut all types of woods and is especially ideal for soft woods i. E. 2, if the owner’s manual is not available, refer to previous invoices. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It is also used for cutting plastics, aluminum, metals, and mild steel. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.

 

Magnate M92C12H3 Carbon Tool Steel Bandsaw Blade 92 Long - 12 Width 3 Hook Tooth

Magnate M92C12H3 Carbon Tool Steel Bandsaw Blade, 92″ Long – 1/2″ Width; 3 Hook Tooth

Magnate M92C12H3 Carbon Tool Steel Bandsaw Blade, 92″ Long – 1/2″ Width; 3 Hook Tooth - The picture depicted represents one blade the pricing is for one blade/package. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Pine, polar, fir and spruce. 8 inch, 7′ 8″ ) bandsaw blades suit the following models enco 199-9001 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 2, if the owner’s manual is not available, refer to previous invoices. E. It can cut all types of woods and is especially ideal for soft woods i. This method will provide the mos. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92 inch ( 7 ft. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Carbon tool steel bandsaw blades are made from high end carbon steel. It is also used for cutting plastics, aluminum, metals, and mild steel. Steel).

 

Magnate M705C12R24 Carbon Tool Steel Bandsaw Blade 70-12 Long - 12 Width 24 Raker Tooth

Magnate M70.5C12R24 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/2″ Width; 24 Raker Tooth

Magnate M70.5C12R24 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/2″ Width; 24 Raker Tooth - Steel). It can cut all types of woods and is especially ideal for soft woods i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Carbon tool steel bandsaw blades are made from high end carbon steel. E. 3, cut your old bandsaw blade so that it lies flat on a level sur. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Pine, polar, fir and spruce. 2, if the owner’s manual is not available, refer to previous invoices. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. The picture depicted represents one blade the pricing is for one blade/package. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360, 912 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. It is also used for cutting plastics, aluminum, metals, and mild steel. E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft.

 

Magnate M9975C12R18 Carbon Tool Steel Bandsaw Blade 99-34 Long - 12 Width 18 Raker Tooth

Magnate M99.75C12R18 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/2″ Width; 18 Raker Tooth

Magnate M99.75C12R18 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/2″ Width; 18 Raker Tooth - Pine, polar, fir and spruce. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 99-3/4 inch ( 8 ft. E. 2, if the owner’s manual is not available, refer to previous invoices. Steel). Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 3, cut your old bandsaw blade so that it lies flat on a level surf. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. The picture depicted represents one blade the pricing is for one blade/package. It is also used for cutting plastics, aluminum, metals, and mild steel. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Carbon tool steel bandsaw blades are made from high end carbon steel. It can cut all types of woods and is especially ideal for soft woods i. 3-3/4 inch, 8′ 3-3/4″ ) bandsaw blades suit the following models craftsman professional 14 general international 90-100 m1 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness.

 

Magnate M91C38H6 Carbon Tool Steel Bandsaw Blade 91 Long - 38 Width 6 Hook Tooth

Magnate M91C38H6 Carbon Tool Steel Bandsaw Blade, 91″ Long – 3/8″ Width; 6 Hook Tooth

Magnate M91C38H6 Carbon Tool Steel Bandsaw Blade, 91″ Long – 3/8″ Width; 6 Hook Tooth - E. Pine, polar, fir and spruce. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. 2, if the owner’s manual is not available, refer to previous invoices. Steel). Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 91 inch ( 7 ft. Carbon tool steel bandsaw blades are made from high end carbon steel. This method will provide. It is also used for cutting plastics, aluminum, metals, and mild steel. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It can cut all types of woods and is especially ideal for soft woods i. The picture depicted represents one blade the pricing is for one blade/package. 7 inch, 7′ 7″ ) bandsaw blades suit the following models sears 12″ craftman if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness.

 

Magnate M72C12R24 Carbon Tool Steel Bandsaw Blade 72 Long - 12 Width 24 Raker Tooth

Magnate M72C12R24 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/2″ Width; 24 Raker Tooth

Magnate M72C12R24 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/2″ Width; 24 Raker Tooth - It is also used for cutting plastics, aluminum, metals, and mild steel. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. This method will provide the most possible. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. The picture depicted represents one blade the pricing is for one blade/package. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. , 6′ ) bandsaw blades suit the following models shopsmith 10 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Pine, polar, fir and spruce. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72 inch ( 6 ft. 2, if the owner’s manual is not available, refer to previous invoices. E. It can cut all types of woods and is especially ideal for soft woods i. Carbon tool steel bandsaw blades are made from high end carbon steel. Steel).

 

Magnate M80C12R24 Carbon Tool Steel Bandsaw Blade 80 Long - 12 Width 24 Raker Tooth

Magnate M80C12R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/2″ Width; 24 Raker Tooth

Magnate M80C12R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/2″ Width; 24 Raker Tooth - Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. 2, if the owner’s manual is not available, refer to previous invoices. Carbon tool steel bandsaw blades are made from high end carbon steel. It is also used for cutting plastics, aluminum, metals, and mild steel. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft. The picture depicted represents one blade the pricing is for one blade/package. It can cut all types of woods and is especially ideal for soft woods i. Steel). Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Pine, polar, fir and spruce. 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness.

 

Magnate M64C38H3 Carbon Tool Steel Bandsaw Blade 64 Long - 38 Width 3 Hook Tooth

Magnate M64C38H3 Carbon Tool Steel Bandsaw Blade, 64″ Long – 3/8″ Width; 3 Hook Tooth

Magnate M64C38H3 Carbon Tool Steel Bandsaw Blade, 64″ Long – 3/8″ Width; 3 Hook Tooth - Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 64 inch ( 5 ft. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 2, if the owner’s manual is not available, refer to previous invoices. The picture depicted represents one blade the pricing is for one blade/package. This method will provide th. 4 inch, 5′ 4″ ) bandsaw blades suit the following model grizzly g1052 9″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It can cut all types of woods and is especially ideal for soft woods i. Steel). E. Carbon tool steel bandsaw blades are made from high end carbon steel. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It is also used for cutting plastics, aluminum, metals, and mild steel. Pine, polar, fir and spruce. E.

 

Magnate M895C34H3 Carbon Tool Steel Bandsaw Blade 89-12 Long - 34 Width 3 Hook Tooth

Magnate M89.5C34H3 Carbon Tool Steel Bandsaw Blade, 89-1/2″ Long – 3/4″ Width; 3 Hook Tooth

Magnate M89.5C34H3 Carbon Tool Steel Bandsaw Blade, 89-1/2″ Long – 3/4″ Width; 3 Hook Tooth - Pine, polar, fir and spruce. It can cut all types of woods and is especially ideal for soft woods i. 5-1/2 inch, 7′ 5-1/2″ ) bandsaw blades suit the following models sears craftsman 12″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. E. The picture depicted represents one blade the pricing is for one blade/package. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 89-1/2 inch ( 7 ft. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. Steel). 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. 2, if the owner’s manual is not available, refer to previous invoices. Carbon tool steel bandsaw blades are made from high end carbon steel. This method wi. It is also used for cutting plastics, aluminum, metals, and mild steel.

 

Magnate M705C38H4 Carbon Tool Steel Bandsaw Blade 70-12 Long - 38 Width 4 Hook Tooth

Magnate M70.5C38H4 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 3/8″ Width; 4 Hook Tooth

Magnate M70.5C38H4 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 3/8″ Width; 4 Hook Tooth - 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360, 912 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. It is also used for cutting plastics, aluminum, metals, and mild steel. Carbon tool steel bandsaw blades are made from high end carbon steel. It can cut all types of woods and is especially ideal for soft woods i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Steel). Pine, polar, fir and spruce. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. 2, if the owner’s manual is not available, refer to previous invoices. The picture depicted represents one blade the pricing is for one blade/package. E. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 3, cut your old bandsaw blade so that it lies flat on a level sur. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.

 

Magnate M67C14R14 Carbon Tool Steel Bandsaw Blade 67 Long - 14 Width 14 Raker Tooth

Magnate M67C14R14 Carbon Tool Steel Bandsaw Blade, 67″ Long – 1/4″ Width; 14 Raker Tooth

Magnate M67C14R14 Carbon Tool Steel Bandsaw Blade, 67″ Long – 1/4″ Width; 14 Raker Tooth - Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Carbon tool steel bandsaw blades are made from high end carbon steel. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. This method w. It is also used for cutting plastics, aluminum, metals, and mild steel. E. It can cut all types of woods and is especially ideal for soft woods i. The picture depicted represents one blade the pricing is for one blade/package. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel). Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 2, if the owner’s manual is not available, refer to previous invoices. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 67 inch ( 5 ft. 7 inch, 5′ 7″ ) bandsaw blades suit the following models ryobi bs1001svtradesman 8168 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Pine, polar, fir and spruce. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length.

 

Magnate M9975C14R14 Carbon Tool Steel Bandsaw Blade 99-34 Long - 14 Width 14 Raker Tooth

Magnate M99.75C14R14 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/4″ Width; 14 Raker Tooth

Magnate M99.75C14R14 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/4″ Width; 14 Raker Tooth - Pine, polar, fir and spruce. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 3, cut your old bandsaw blade so that it lies flat on a level surf. E. Steel). It is also used for cutting plastics, aluminum, metals, and mild steel. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 99-3/4 inch ( 8 ft. Carbon tool steel bandsaw blades are made from high end carbon steel. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It can cut all types of woods and is especially ideal for soft woods i. 3-3/4 inch, 8′ 3-3/4″ ) bandsaw blades suit the following models craftsman professional 14 general international 90-100 m1 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 2, if the owner’s manual is not available, refer to previous invoices. The picture depicted represents one blade the pricing is for one blade/package.

 

Magnate M9975C34H2 Carbon Tool Steel Bandsaw Blade 99-34 Long - 34 Width 2 Hook Tooth

Magnate M99.75C34H2 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 3/4″ Width; 2 Hook Tooth

Magnate M99.75C34H2 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 3/4″ Width; 2 Hook Tooth - Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Pine, polar, fir and spruce. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 99-3/4 inch ( 8 ft. Steel). 3, cut your old bandsaw blade so that it lies flat on a level surf. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It is also used for cutting plastics, aluminum, metals, and mild steel. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It can cut all types of woods and is especially ideal for soft woods i. 3-3/4 inch, 8′ 3-3/4″ ) bandsaw blades suit the following models craftsman professional 14 general international 90-100 m1 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Carbon tool steel bandsaw blades are made from high end carbon steel. 2, if the owner’s manual is not available, refer to previous invoices.

 

Magnate M62C12H3 Carbon Tool Steel Bandsaw Blade 62 Long - 12 Width 3 Hook Tooth

Magnate M62C12H3 Carbon Tool Steel Bandsaw Blade, 62″ Long – 1/2″ Width; 3 Hook Tooth

Magnate M62C12H3 Carbon Tool Steel Bandsaw Blade, 62″ Long – 1/2″ Width; 3 Hook Tooth - Pine, polar, fir and spruce. Steel). It is also used for cutting plastics, aluminum, metals, and mild steel. 2 inch, 5′ 2″ ) bandsaw blades suit the following models skil 3104 sears craftsman 103-24556, 2442 9ht2442n central machinery d0686-4bmf, 01629-icea mark 1 rexon bs-12 alltrade 1996bbr powerline dbs-12 jet dbs-12 black & decker (some models) grizzly g8976 12″ walker-turner 10″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 62 inch ( 5 ft. E. It can cut all types of woods and is especially ideal for soft woods i. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. E. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Carbon tool steel bandsaw blades are made from high end carbon steel. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc.

 

Magnate M72C14R10 Carbon Tool Steel Bandsaw Blade 72 Long - 14 Width 10 Raker Tooth

Magnate M72C14R10 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/4″ Width; 10 Raker Tooth

Magnate M72C14R10 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/4″ Width; 10 Raker Tooth - Pine, polar, fir and spruce. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72 inch ( 6 ft. E. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. It is also used for cutting plastics, aluminum, metals, and mild steel. , 6′ ) bandsaw blades suit the following models shopsmith 10 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Carbon tool steel bandsaw blades are made from high end carbon steel. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. The picture depicted represents one blade the pricing is for one blade/package. 2, if the owner’s manual is not available, refer to previous invoices. Steel). It can cut all types of woods and is especially ideal for soft woods i. This method will provide the most possible. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced.

 

Magnate M72C14R24 Carbon Tool Steel Bandsaw Blade 72 Long - 14 Width 24 Raker Tooth

Magnate M72C14R24 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/4″ Width; 24 Raker Tooth

Magnate M72C14R24 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/4″ Width; 24 Raker Tooth - Pine, polar, fir and spruce. , 6′ ) bandsaw blades suit the following models shopsmith 10 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. It can cut all types of woods and is especially ideal for soft woods i. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. 2, if the owner’s manual is not available, refer to previous invoices. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. The picture depicted represents one blade the pricing is for one blade/package. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72 inch ( 6 ft. Steel). This method will provide the most possible. It is also used for cutting plastics, aluminum, metals, and mild steel. Carbon tool steel bandsaw blades are made from high end carbon steel.

 

Magnate M80C38R10 Carbon Tool Steel Bandsaw Blade 80 Long - 38 Width 10 Raker Tooth

Magnate M80C38R10 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/8″ Width; 10 Raker Tooth

Magnate M80C38R10 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/8″ Width; 10 Raker Tooth - Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft. It is also used for cutting plastics, aluminum, metals, and mild steel. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Pine, polar, fir and spruce. It can cut all types of woods and is especially ideal for soft woods i. Steel). 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Carbon tool steel bandsaw blades are made from high end carbon steel. 2, if the owner’s manual is not available, refer to previous invoices. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. The picture depicted represents one blade the pricing is for one blade/package. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.

 

Magnate M925C14R14 Carbon Tool Steel Bandsaw Blade 92-12 Long - 14 Width 14 Raker Tooth

Magnate M92.5C14R14 Carbon Tool Steel Bandsaw Blade, 92-1/2″ Long – 1/4″ Width; 14 Raker Tooth

Magnate M92.5C14R14 Carbon Tool Steel Bandsaw Blade, 92-1/2″ Long – 1/4″ Width; 14 Raker Tooth - Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It is also used for cutting plastics, aluminum, metals, and mild steel. The picture depicted represents one blade the pricing is for one blade/package. Carbon tool steel bandsaw blades are made from high end carbon steel. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92-1/2 inch ( 7 ft. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It can cut all types of woods and is especially ideal for soft woods i. 8-1/2 inch, 7′ 8-1/2″ ) bandsaw blades suit the following models jet j-8203k powerline mark 1 shopcraft 28-283f mit 5125 american industrial amt 4113 enco 505-1372 (models 8201, 8203, 8201vs and 8203vs), 199-9013, 199-9011, 199-9001 dayton 3z981 central machinery 32206-ocea, 32208-ocea, 5687-ocea, 2146-3bmf, 00580-ocea nu-mark 14″ united 14″ wilton tradesman 8201, 8203, 8201vs, 8203vs grizzly g0580x g0555x (92-1/2″ to 93-1/2″) 14″ ohio fo. E. E. Pine, polar, fir and spruce. Steel).

 

Magnate M705C18R18 Carbon Tool Steel Bandsaw Blade 70-12 Long - 18 Width 18 Raker Tooth

Magnate M70.5C18R18 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/8″ Width; 18 Raker Tooth

Magnate M70.5C18R18 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/8″ Width; 18 Raker Tooth - Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It can cut all types of woods and is especially ideal for soft woods i. Carbon tool steel bandsaw blades are made from high end carbon steel. 3, cut your old bandsaw blade so that it lies flat on a level sur. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360, 912 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 2, if the owner’s manual is not available, refer to previous invoices. Steel). Pine, polar, fir and spruce. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. E. The picture depicted represents one blade the pricing is for one blade/package. It is also used for cutting plastics, aluminum, metals, and mild steel. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results.