23 Best Dewalt Drills in 2020

 

DEWALT 20V MAX XR Brushless DrillDriver Kit with Tool Connect Bluetooth DCD792D2 #ad

DEWALT 20V MAX XR Brushless Drill/Driver Kit with Tool Connect Bluetooth (DCD792D2)

DEWALT 20V MAX XR Brushless Drill/Driver Kit with Tool Connect Bluetooth (DCD792D2) #ad - Tool connect app allows you to easily pair with the app by holding down the pair button on the tool foot for 3-5 seconds. Maximum initial battery voltage (measured without a workload) is 20 volts nominal voltage is 18. Tool length 69 in. Dewalt brushless motor delivers up to 75% more runtime vs 18v nicad brushed motors. Last seen feature helps reduce wasted time and money by providing the street address of where your compact drill/driver was last in range of your tool connect-enabled device. Receive diagnostics on your compact drill/driver like internal coin cell battery life, temperature, number of trigger pulls, and how long the tool has been running. Program 3 customized rpm settings for precise speed of application, and customize the brightness and delay of the integrated led light.

 

DEWALT 20V MAX Hammer Drill Compact 15-Amp Hour DCD785C2 #ad

DEWALT 20V MAX Hammer Drill, Compact, 1.5-Amp Hour (DCD785C2)

DEWALT 20V MAX Hammer Drill, Compact, 1.5-Amp Hour (DCD785C2) #ad - High speed transmission delivers two-speeds (0-600 and 0-2,000 rpm) for a range of fastening and drilling applications. This kit either comes in a hard case or a contractor bag (soft case). Dewalt 20v dcd785c2 max lithium ion compact hammer drill kit 15ah. Heavy-duty 1/2-inch ratcheting chuck provides superior bit gripping strength. Ergonomic handle delivers comfort and control. Maximum initial battery voltage (measured without a workload) is 20 volts nominal voltage is 18. Powered by an energy star qualified charger for a better environment. Compact, lightweight design fits into tight areas.

 

DEWALT Corded Drill 78-Amp 12-Inch Variable Speed Reversible DW235G #ad

DEWALT Corded Drill, 7.8-Amp, 1/2-Inch, Variable Speed Reversible (DW235G)

DEWALT Corded Drill, 7.8-Amp, 1/2-Inch, Variable Speed Reversible (DW235G) #ad - Metal gear housing for jobsite durability and increased reliability. Two-finger trigger for increased comfort. Metal gear housing for jobsite durability and increased reliability. Manufactured in the usa. Helical-cut steel, heat-treated steel gears for long life and durability. Included with drill chuck key with holder and 360-degree side handle. 360-degree side handle for greater control and versatility. Helical-cut steel, heat-treated steel gears for long life and durability. Two-finger, rubber trigger for increased comfort. 360 degree side handle for greater control and versatility.

 

DEWALT DCD710S2 12-Volt Max 38-Inch Drill Driver Kit #ad

DEWALT DCD710S2 12-Volt Max 3/8-Inch Drill Driver Kit

DEWALT DCD710S2 12-Volt Max 3/8-Inch Drill Driver Kit #ad - Made in united states. Dimensions 1 x 1 x 1. Compact, lightweight design fits into tight areas. Maximum initial voltage on batteries (measured without a workload) is 12 volts, under a workload nominal voltage is 108. Tools/cordless power tools. Two-speed transmission for optimal speed and torque control. Belt hook included for portability. Led light provides visibility in dark areas.

 

DEWALT DG5120 Heavy-duty Drill Holster #ad

DEWALT DG5120 Heavy-duty Drill Holster

DEWALT DG5120 Heavy-duty Drill Holster #ad - Durable drill holster this dewalt drill holster is made of ballistic poly material for added durability. Stay organized this drill holster contains multiple outer pockets and sleeves for complete bit organization. Convenient hook-and-loop backing help to keep strap back when drill holster is not in use. Angled for better balance this drill holster holds most brands of t-handle drills. Easy access to drill this drill holster has a safety strap with quick-release buckle for easy access to your tools. Angled holster provides better drill balance fits belts to 2-3/4-inch wide. Added pockets and elastic loops hold bits, chuck key, drivers, etc. Adjustable strap and quick-release buckle holds drill securely in place. Ballistic poly material provides strength and durability. Hook and loop backing keeps strap back when not in use.

 

DEWALT Drill Bit Set Impact Ready Titanium 7-Piece DD5157 #ad

DEWALT Drill Bit Set, Impact Ready, Titanium, 7-Piece (DD5157)

DEWALT Drill Bit Set, Impact Ready, Titanium, 7-Piece (DD5157) #ad - Ground from solid 1 piece design is up to 5 times more durable than the current 2 piece conventional product. Common users include electricians, hvac, mechanics, glaziers and gc’s. Patented web taper increases the rigidity of the bit to decrease the potential for bit breakage. Patented pilot point tip allows users to drill holes faster and offers clean burr free holes.

 

DEWALT Drill Bit Pilot Point Industrial Cobalt 12-Inch DWA1232 #ad

DEWALT Drill Bit, Pilot Point, Industrial Cobalt, 1/2-Inch (DWA1232)

DEWALT Drill Bit, Pilot Point, Industrial Cobalt, 1/2-Inch (DWA1232) #ad - Commonly used for drilling into stainless steel, drilling into angle iron, i-beams, and other similar metals. This bit features a pilot point and split tip design that starts on contact and eliminates bit walking along for more control. The dewalt dwa1232 1/2″ pilot point industrial cobalt drill bit is designed for maximum speed and life in stainless steel and other hard metals.

 

DEWALT Titanium Drill Bit Set with Pilot Point 29-Piece DW1369 #ad

DEWALT Titanium Drill Bit Set with Pilot Point, 29-Piece (DW1369)

DEWALT Titanium Drill Bit Set with Pilot Point, 29-Piece (DW1369) #ad - Dewalt’s titanium drill bits have a titanium coating that provides longer life when drilling in non-ferrous metals. Includes sizes from 1/6 to 1/2-inch in a tough case. These bits are also suitable for drilling in wood and plastic and are ideal for commercial and residential applications.

 

DEWALT Drill Bit Set Brad Point 6-Piece DW1720 #ad

DEWALT Drill Bit Set, Brad Point, 6-Piece (DW1720)

DEWALT Drill Bit Set, Brad Point, 6-Piece (DW1720) #ad - Brad point tip reduces walking. Engineered flutes for clean effective chip removal. Precise cutting edges to reduce splintering.

 

DEWALT DW1341 14-Piece Titanium Speed Tip Drill Bit Set #ad

DEWALT DW1341 14-Piece Titanium Speed Tip Drill Bit Set

DEWALT DW1341 14-Piece Titanium Speed Tip Drill Bit Set #ad - Dewalt’s titanium drill bits have a titanium coating that provides longer life when drilling in non-ferrous metals. These bits are also suitable for drilling in wood and plastic and are ideal for commercial and residential applications. Includes 14 bits sized from 1/16 to 1/2-inch in a plastic tough case. The speed tip design reduces walking on start, and the no spin keeps the bit secure in the drill.

 

DEWALT Step Drill Bit Set 78-Inch to 1-18-Inch DWA1789IR #ad

DEWALT Step Drill Bit Set, 7/8-Inch to 1-1/8-Inch (DWA1789IR)

DEWALT Step Drill Bit Set, 7/8-Inch to 1-1/8-Inch (DWA1789IR) #ad - Its laser engraved numbers increase step visibility and while optimized for impact driver usage, this bit does work with rotary drills. The dewalt dwa1789ir 7/8-inch-1-1/8-inch impact ready step drill bit has a split point tip that increases speed.

 

DEWALT 20V MAX XR Brushless DrillDriver 3-Speed Premium 50Ah Kit DCD991P2 #ad

DEWALT 20V MAX XR Brushless Drill/Driver 3-Speed, Premium 5.0Ah Kit (DCD991P2)

DEWALT 20V MAX XR Brushless Drill/Driver 3-Speed, Premium 5.0Ah Kit (DCD991P2) #ad - Maximum initial battery voltage (measured without a workload) is 20 volts nominal voltage is 18. 0-38,250 bpm for fast drilling in masonry materials. High performance transmission for fast application speeds and improved run-time. (2) dcb205, 20v max xr high capacity li-ion batteries (50ah). High efficiency brushless motor delivers up to 57% more run time over brushed. 3-mode led light with spotlight mode.

 

DEWALT Drill Bit Set Titanium 14-Piece DW1354 #ad

DEWALT Drill Bit Set, Titanium, 14-Piece (DW1354)

DEWALT Drill Bit Set, Titanium, 14-Piece (DW1354) #ad - Includes sizes from 1/6 to 1/2-inch in a plastic tough case. Dewalt’s titanium drill bits have a titanium coating that provides longer life when drilling in non-ferrous metals. These bits are also suitable for drilling in wood and plastic and are ideal for commercial and residential applications.

 

DeWalt Bit Holder for 20V Max DrillHammerdrillDriver DCD980 DCD985 DCD980L2 DCD985L2 #ad

DeWalt Bit Holder for 20V Max Drill/Hammerdrill/Driver DCD980 DCD985 DCD980L2 DCD985L2

DeWalt Bit Holder for 20V Max Drill/Hammerdrill/Driver DCD980 DCD985 DCD980L2 DCD985L2 #ad - Please note does not fit all specs of above models listed, please consult owner’s manual for proper part number identification and proper installation. Includes (1) bit holder (n268199) and (1) replacement screw (n042665). Genuine oem dewalt parts. Bit holder affixes to the base of the handle on several dewalt 20v tools.

 

DEWALT Drill Bit Pilot Point Industrial Cobalt 14-Inch DWA1216 #ad

DEWALT Drill Bit, Pilot Point, Industrial Cobalt, 1/4-Inch (DWA1216)

DEWALT Drill Bit, Pilot Point, Industrial Cobalt, 1/4-Inch (DWA1216) #ad - The dewalt dwa1216 1/4″ pilot point industrial cobalt drill bit is designed for maximum speed and life in stainless steel and other hard metals. Commonly used for drilling into stainless steel, drilling into angle iron, i-beams, and other similar metals. This bit features a pilot point and split tip design that starts on contact and eliminates bit walking along for more control.

 

DEWALT Drill Tap UNC 14-Inch DWADT1420 #ad

DEWALT Drill Tap, UNC, 1/4-Inch (DWADT1420)

DEWALT Drill Tap, UNC, 1/4-Inch (DWADT1420) #ad - The dewalt dwadt1420 1/4″ 20 unc drill tap is designed to be used with impact drivers. It offers a speed tip which penetrates material quickly, along with a hex shank for use in impact drivers. It allows you to drill and tap holes in one application, and also deburr and countersink in one step.

 

DEWALT Electric Drill 38-Inch Variable Speed Reversible Right Angle DW160V #ad

DEWALT Electric Drill, 3/8-Inch, Variable Speed Reversible, Right Angle (DW160V)

DEWALT Electric Drill, 3/8-Inch, Variable Speed Reversible, Right Angle (DW160V) #ad - Double gear reduction increases torque performance and decreases gear stress. Chuck is shielded to protect workpiece from chuck teeth in confined areas. 100% ball-bearing construction provides durability and longer tool life. Compact right-angle design for easy access in tight places. Paddle switch for convenient one-handed operation.

 

DEWALT Drill Bit Black Oxide 38-Inch x 12-Inch DW1610 #ad

DEWALT Drill Bit, Black Oxide, 3/8-Inch x 12-Inch (DW1610)

DEWALT Drill Bit, Black Oxide, 3/8-Inch x 12-Inch (DW1610) #ad - Parabolic flute design improves chip ejection in metal and wood drilling applications. Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute. 135 degree split point drills on contact and prevents walking. The product is manufactured in china. Black oxide coated for greater wear resistance. Easy to use. The product is 3/8×12 has stl drill bit.

 

DEWALT 20V MAX SDS Rotary Hammer Drill Tool Only DCH273B #ad

DEWALT 20V MAX SDS Rotary Hammer Drill, Tool Only (DCH273B)

DEWALT 20V MAX SDS Rotary Hammer Drill, Tool Only (DCH273B) #ad - Active vibration control which significantly reduces vibration. Battery & charger sold separately. Retractable utility hook for convenient hanging and storage. 21 joules impact energy which provides corded power without the cord. Brushless motor for extended runtime and durability. No load speed 0, 1,100 rpm optimal concrete drilling-5/32, 1/2 inch chuck type-sds+ blows/min- 0, 4,600 bpm.

 

DEWALT Drill Bit Set with Metal Index 29-Piece DW1969 #ad

DEWALT Drill Bit Set with Metal Index, 29-Piece (DW1969)

DEWALT Drill Bit Set with Metal Index, 29-Piece (DW1969) #ad - This are highly durable. This is manufactured in china. This are easy to use.

 

DEWALT DWA56015 Multi-Material Drill Bit Set 5-Piece #ad

DEWALT DWA56015 Multi-Material Drill Bit Set, 5-Piece

DEWALT DWA56015 Multi-Material Drill Bit Set, 5-Piece #ad - Dewalt tools can be found nationally and internationally wherever tools are sold. They’re great for working on light-gauge steel, pvc, wood, ceramic, tile, brick and cinder block often encountered on residential and commercial job sites. The non-spin shank eliminates bit slippage, which is essential to ensuring control and minimizing shaft breakage. With more than 1,000 factory-owned and authorized locations, dewalt has one of the most extensive service and repair networks in north america. The drill bits’ carbide split point tip and aggressive flute angles provide maximum sharpness and speed for fast material removal when drilling. Dwa56015 multi-material drill bit 5-piece set at a glance includes 1/4-, 3/16-, 5/32-, 5/16-, and 3/8-inch drill bits carbide split point tip for maximum sharpness aggressive flute angles for faster drilling speed no-spin shank eliminates bit slippage. Five-piece drill bit set for tackling a wide range of materials (view larger). Ideal for electricians, plumbers and remodelers tasked with drilling through several types of materials, the 5-piece dewalt dwa56015 multi-material drill bit set alleviate the need for professionals to carry and change multiple types of bits when drilling through different materials. This set includes 1/4-, 3/16-, 5/32-, 5/16-, and 3/8-inch drill bits. What’s in the box dwa56015 multi-material drill bit 5-piece set about dewalt dewalt is a leading manufacturer of industrial power tools and accessories, including corded and cordless drills, saws, hammers, grinders, routers, planers, plate joiners, sanders, lasers, generators, compressors, nailers, saw blades, metal and masonry drill bits, abrasives, screw driving accessories and more.

 

DEWALT Drill Bit 3-58-Inch Selfeed 716-Inch Shank DW1641 #ad

DEWALT Drill Bit, 3-5/8-Inch, Selfeed, 7/16-Inch Shank (DW1641)

DEWALT Drill Bit, 3-5/8-Inch, Selfeed, 7/16-Inch Shank (DW1641) #ad - Sturdy 7/16-inch ball groove shank is easy to exchange for each use. 7/16-inch ball groove shank for quick change applications. Aggressive spur provides fast material penetraion. Open tooth design allows for more resharpenings. Optimized cutting geometry provides longer bit life.

 

DEWALT Drill Bit 3-Inch Selfeed 716-Inch Shank DW1640 #ad

DEWALT Drill Bit, 3-Inch, Selfeed, 7/16-Inch Shank (DW1640)

DEWALT Drill Bit, 3-Inch, Selfeed, 7/16-Inch Shank (DW1640) #ad - Aggressive spur provides fast material penetraion. Optimized cutting geometry provides longer bit life. Open tooth design allows for more resharpenings. 7/16-inch ball groove shank for quick change applications. 7/16″ ball groove shank for quick change applications.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.