23 Top Steel Drill Bit Sets for 2020

 

High Speed Steel Drill Bit Set 13 Piece Drill Master

High Speed Steel Drill Bit Set, 13 Piece, Drill Master

High Speed Steel Drill Bit Set, 13 Piece, Drill Master - The high speed steel drill bits in this set are capable of speedier drilling and are longer lasting, too. The drill bits have split point tips to prevent skating. They’re equally suitable for heavy drillers who work in fabrication and do-it-yourselfers doing general purpose drilling in wood or metal.

 

Drill Hulk 13-Piece M35 Cobalt Steel Drill Bit Set for Hard Metal Stainless Steel 116-Inch to 14-Inch Jobber Length 3-Flat Shank

Drill Hulk 13-Piece M35 Cobalt Steel Drill Bit Set for Hard Metal, Stainless Steel, 1/16-Inch to 1/4-Inch, Jobber Length, 3-Flat Shank

Drill Hulk 13-Piece M35 Cobalt Steel Drill Bit Set for Hard Metal, Stainless Steel, 1/16-Inch to 1/4-Inch, Jobber Length, 3-Flat Shank - Made from high-speed steel and 5% cobalt improve much higher heat resistance because of cobalt steel’s high red hardness, provide strong durable performance compared to typical hss drill bits. Application best used for drilling in hard metal, including stainless steel. Can be repeatedly sharpened as needed cobalt drill bit’s hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits. Jobber length jobber length cobalt drill bit, 135 degree split point reduces drill walking, 3-flat shank provides a secrue grip in chucks. Include 13 pieces cobalt drill bits in inch sizes 1/16″ to 1/4″ (1/64″ increments) with plastic case.

 

Hymnorq M35 Cobalt Steel Fractional 932 Inch Dia x 425 Inch Long Twist Drill Bit Set of 5pcs Jobber Length Round Shank Self-centering Split Point Heat Resistant for Metalworking

Hymnorq M35 Cobalt Steel Fractional 9/32 Inch Dia. x 4.25 Inch Long Twist Drill Bit Set of 5pcs, Jobber Length Round Shank, Self-centering Split Point, Heat Resistant for Metalworking

Hymnorq M35 Cobalt Steel Fractional 9/32 Inch Dia. x 4.25 Inch Long Twist Drill Bit Set of 5pcs, Jobber Length Round Shank, Self-centering Split Point, Heat Resistant for Metalworking - Self centering, the 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure the bits will not “walk” or “wander” straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Downloadable user guide, we’ve summed up some tips of drilling metals, including a rpm chart for several common metals, based on our reviews and some articles on the internet in most cases, our customers would get a much better result with these tips welcome to download. 5pc set, the set includes 5pcs of 9/32″ diameter m35 grade cobalt steel twist drill bits, packed in a plastic case for easy storage and carrying total lenght 425 inch working length 295 inch manufactured to german din338 standard. Cobalt steel, manufactured from m35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average hss drill bit. For metalworking, particularly successful in cutting through hard metals(hardness less than hrc38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too not for hardened steel / high carbon steel try to adjust the rpm when it fails to penetrate.

 

29 PC TITANIUM COATED METAL STEEL DRILL BIT SET INDEX FOR METAL STEEL

29 PC TITANIUM COATED METAL STEEL DRILL BIT SET INDEX FOR METAL STEEL

29 PC TITANIUM COATED METAL STEEL DRILL BIT SET INDEX FOR METAL STEEL - Description29pc titanium coated drill bit set sizes 1/16″ ~ 1/2″ by 1/64th efficient split point design prevents skating for easier penetration & efficient high speed steel m2, long-lasting titanium nitride coated set includes 1/16″, 5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 11/64″, 3/16″, 13/64″, 7/32″, 15/64″, 1/4″, 17/64″, 9/32″, 19/64″, 5/16″, 21/64″, 11/32″, 23/64″, 3/8″, 25/64″, 13/32″, 27/64″, 7/16″, 29/64″, 15/32″, 31/64″, 1/2″.

 

SE High Speed Steel Drill Bit Set 15 PC - 82616MD

SE High Speed Steel Drill Bit Set (15 PC.) – 82616MD

SE High Speed Steel Drill Bit Set (15 PC.) – 82616MD - 10, 1. 35, 1. Se is a registered trademark protected by us trademark law. 00. 45, 1. Genuine se products come with the se logo on the packaging. 25, 1. 40, 1. The bits come in a convenient storage pouch with labeled sizes for organization and transportation. 15, 1. Warning using hand tools can be dangerous. These drill bits are ideal for dremel rotary tools. Always take care and keep away from children. Se is committed to providing the customer with the best source for value possible on the market. ). 50, 1. 80, 1. 20, 1. 30, 1. 70, 1. 60, 1. Select correct type and size of hand tools for work. ) is useful for drilling holes in ferrous metals, glass, marble, stainless steel, stone, tile, and tough casting sand forgings. The se high speed steel drill bit set (15 pc. It is great for electronics, metalworking, wire insulation, and more. 90, and 2. 05, 1. This set includes these sizes (mm) 1. You will enjoy the quality, function and usefulness of our se high speed steel drill bit set (15 pc. Ipr rights notice important avoid getting counterfeit items. Wear protective eyewear in work area at all times.

 

IRWIN Drill Bit Set M35 Cobalt Steel 29-Piece 3018002

IRWIN Drill Bit Set, M35 Cobalt Steel, 29-Piece (3018002)

IRWIN Drill Bit Set, M35 Cobalt Steel, 29-Piece (3018002) - Sizes 1/16 inch -1/2 inch in 1/64 inch increments, 135 degree split point to minimize walk. Cobalt drill bit set. Heavy duty web construction for strength & durability. 29 piece. 5% cobalt for higher heat & abrasion resistance.

 

MaxTool 29 Pieces Twist Drill Bit Set Jobber Length High Speed Steel M2 135 Deg Split Point Fully Ground 116 to 12 X 64th BS02W13R029P

MaxTool 29 Pieces Twist Drill Bit Set; Jobber Length High Speed Steel M2 135 Deg Split Point Fully Ground 1/16″ to 1/2″ X 64th; BS02W13R029P

MaxTool 29 Pieces Twist Drill Bit Set; Jobber Length High Speed Steel M2 135 Deg Split Point Fully Ground 1/16″ to 1/2″ X 64th; BS02W13R029P - Sizes range inch sizes 1/16″ (00625) to 1/2″ (05000) in 1/64″ increments. 135-degree split point prevents “walking”, reduce logging, and penetrates hard material without a pilot hole. 3-flat on shank prevents “spinning” in chucks and maximizes security for precise holes. Quality high speed steel m2 provides all drills long tool life. Precision fully ground ensures chips moving smoothly, ultimate accuracy and performace.

 

Clearance  Tuscom 50Pcs Titanium Coated HSS High Speed Steel Drill Bit Set Tool 1152253mmfor DIY Home and General BuildingEngineering Using Gold

Clearance Tuscom 50Pcs Titanium Coated HSS High Speed Steel Drill Bit Set Tool 1/1.5/2/2.5/3mm,for DIY, Home and General Building/Engineering Using (Gold)

Clearance Tuscom 50Pcs Titanium Coated HSS High Speed Steel Drill Bit Set Tool 1/1.5/2/2.5/3mm,for DIY, Home and General Building/Engineering Using (Gold) - &#X1f525 mini twist drill hand twist drill jewelry twist step drill bit pocket hole dewalt gold ferrous twist drill bit set diamond twist drill twist drill bit sharpening jig titanium twist drill set twist drill bit kit twist drill bit set fractional cobalt twist drill bits twist and drill set 1mm twist drill bit reverse twist drill bit steel twist drill bit twist saw drill metric twist drill set dewalt pilot point twist drill bit set titanium twist drill bit set mini twist drill bit set large twist. &#X1f525 hand twist drill for resin left twist drill bit set cleveland twist drill bits long twist drill bits micro twist drill cleveland twist drill triumph twist drill set twist step drill bit triumph twist drill co left twist drill bits alex twist and drill twist drill bit hss precision twist drill set dewalt twist drill bit set high speed twist drill bit set twist drill sharpener. &#X1f525 note it is manual measurement, there may be 2-3mm error and item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same hope understand package content 10pcs x 10mm 10pcs x 15mm 10pcs x 20mm 10pcs x 25mm 10pcs x 30mm. &#X1f525 micro twist drill bit set precision twist drill index twist drill gauge hand twist drill bits craftsman twist drill drill chuck twist drill bits cobalt twist drill set wire twist drill twist and drill set alex high-speed steel twist drill bit twist drill for jewelry left twist drill bit extractor set twist drill bit set concrete small twist drill bits twist drill angle gauge grinding drill bits small twist drill set viking twist drill precision twist qc drill. &#x1f525feature 100% brand new and high quality quantity 1 hss drill bit set for wood, plastic and aluminum ideal for diy, home and general building/engineering using can not use for stainless steel material containing sizes1mm,15mm,2mm,25mm,3mm material high speed steel with titanium coated.

 

Ivy Classic 10394  29-Piece Swift Bore High Speed Steel Roll Forged Drill Bit Set Sturdy Metal Case

Ivy Classic 10394 29-Piece Swift Bore High Speed Steel Roll Forged Drill Bit Set, Sturdy Metal Case

Ivy Classic 10394 29-Piece Swift Bore High Speed Steel Roll Forged Drill Bit Set, Sturdy Metal Case - 29-piece drill set includes 1/16-inch through 1/2-inch in 1/64-inch increments, see description below for all sizes. Hardened and tempered high speed steel, 118-degree standard point, shanks reduced to 3/8-inch. Sturdy metal case with hinged index, bits clearly visible with sizes marked on case. Roll forged, two tone finish, black oxide flutes with a bright outer grind. Jobber length drills for drilling steel, wood and plastic, swift bore (registered trademark).

 

amoolo Cobalt Drill Bit Set 13 pcs M35 HSS Metal Drill Bits for Steel Stainless Steel Metal and Cast Iron116-14

amoolo Cobalt Drill Bit Set (13 pcs), M35 HSS Metal Drill Bits for Steel, Stainless Steel, Metal and Cast Iron,1/16″-1/4″

amoolo Cobalt Drill Bit Set (13 pcs), M35 HSS Metal Drill Bits for Steel, Stainless Steel, Metal and Cast Iron,1/16″-1/4″ - 【Fully ground process & 135° split point】fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance 135° split point with straight shank prevents walking and makes drilling precise and faster no center punch is needed. 【Multiple application】perfectly suitable for cutting hard metal such as stainless steel, steel and cast iron as well as wood, aluminum alloy and other softer metals × not for glass or ceramic materials ×not for high carbon steel and heat-treated steel √ pay attention to speed, pressure and heat control during drilling. 【M35 cobalt high speed steel】industry grade 6542 high speed steel drill bit set, harder than 4241 hss used in other similar drill bits set these drill bits also contain 5% cobalt, which increases wear-resistance and durability. 【90 days warranty】if you are not fully satisfied for any reason, please contact us for 100% refund or replacement. 【Combo set of 13 sizes】13 most commonly-used sizes (1/16″,5/64″,3/32″,7/64″,1/8″,9/64″,5/32″,11/64″,3/16″,13/64″,7/32″,15/64″,1/4″) to satisfy all your needs this drill bits set fits the majority of power drill currently on the market and come with a portable plastic bag for easy storage and organization.

 

Drill America 115 Piece High Speed Steel Drill Bit Set with Black Oxide Finish 116-12 A-Z 1-60 Dan Series

Drill America 115 Piece High Speed Steel Drill Bit Set with Black Oxide Finish (1/16″-1/2″, A-Z, 1-#60), D/an Series

Drill America 115 Piece High Speed Steel Drill Bit Set with Black Oxide Finish (1/16″-1/2″, A-Z, 1-#60), D/an Series - 115 piece drill bit set comes in a metal case. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Drill America 60 Piece High Speed Steel Drill Bit Set Wire Sizes 1 - 60 with Black Oxide Finish DWDN Series

Drill America 60 Piece High Speed Steel Drill Bit Set (Wire Sizes: #1 – #60) with Black Oxide Finish, DWDN Series

Drill America 60 Piece High Speed Steel Drill Bit Set (Wire Sizes: #1 – #60) with Black Oxide Finish, DWDN Series - 60 piece drill bit set comes in a metal case and includes wire sizes #1, #60. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.

 

Twist Drill Bit Set 6 Pcs High Speed Steel Work Bit of Hard Metal Drill Bits for Metal,Stainless Steel Cast Iron 564 -310

Twist Drill Bit Set 6 Pcs, High Speed Steel Work Bit of Hard Metal, Drill Bits for Metal,Stainless Steel, Cast Iron, 5/64″ -3/10″

Twist Drill Bit Set 6 Pcs, High Speed Steel Work Bit of Hard Metal, Drill Bits for Metal,Stainless Steel, Cast Iron, 5/64″ -3/10″ - 【combo set of 6 sizes】6 most commonly-used sizes cobalt drill bits with a plastic case for easy storage and organization 5/64″, 7/64″, 5/32″,3/16,15/64″, 3/10″ the drill bits set fits the majority of power drill currently on the market and satisfy all your needs. 【Fully ground process & 135° split point】no center punch is needed fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance 135° split point with straight shank prevents walking and makes drilling precise and faster. 【Multiple application】coblat hss is perfectly suitable for hard metals, such as stainless steel and cast iron can be used for wood, aluminum alloy and other softer metals × not for glass or ceramic materials ×not for high carbon steel and heat-treated steel √ pay attention to speed, pressure and heat control during drilling. 【Cobalt drill bit】this drill bit contains 5% cobalt (cobalt hss), which increases the strength, the tool life and makes it more heat-resistant rockwell hardness >= 67. 【90 days warranty】if you are not fully satisfied for any reason, please contact us for 100% refund or replacement.

 

ATD Tools 9260 13 Piece Cobalt Steel Drill Bit Set

ATD Tools 9260 13 Piece Cobalt Steel Drill Bit Set

ATD Tools 9260 13 Piece Cobalt Steel Drill Bit Set - The atd-9260 offers the best heat resistance for drilling in extremely hard and abrasive materials including stainless steel, titanium & cast iron. The set includes 1/16″, 5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 11/64″, 3/16″, 13/64″, 7/32″, 15/64″ & 1/4″.

 

Power Tools 115pc HSS High Speed Steel Drill Bit Set Metal w Index Case NEW

Power Tools 115pc HSS High Speed Steel Drill Bit Set Metal w/ Index Case NEW!

Power Tools 115pc HSS High Speed Steel Drill Bit Set Metal w/ Index Case NEW! - This drill bit set comes in a metal index case. Turbomax drill bit tip design stays sharp and drills fast. 3-flatted shank design provides better chuck grip and reduces slippage. Drill bits constructed of m-2 high-speed steel for strength, as well as heat and wear resistance. Power tools 115pc hss high speed steel drill bit set metal w/ index case new free shipping #0038/3.

 

Drill America 25 Piece Heavy Duty High Speed Steel Drill Bit Set 1mm - 13mm x 5mm KFD Series

Drill America 25 Piece Heavy Duty High Speed Steel Drill Bit Set (1mm – 13mm x .5mm), KFD Series

Drill America 25 Piece Heavy Duty High Speed Steel Drill Bit Set (1mm – 13mm x .5mm), KFD Series - 1-13mm x 0. 5mm hss split point black & gold kfd (killer force drill bit) jobber length set.

 

Warrior Titanium Nitride 29pc High Speed Steel Drill Bit Set

Warrior Titanium Nitride 29pc High Speed Steel Drill Bit Set

Warrior Titanium Nitride 29pc High Speed Steel Drill Bit Set - Titanium nitride drill bits run cooler, drill smoother and last longer than standard bits. Sizes 1/16 in, 5/64 in, 3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 11/64 in, 3/16 in, 13/64 in, 7/32 in, 15/64 in, 1/4 in, 17/64 in, 9/32 in, 19/64 in, 5/16 in, 21/64 in, 11/32 in, 23/64 in, 3/8 in, 25/64 in, 13/32 in, 27/64 in, 7/16 in, 29/64 in, 15/32 in, 31/64 in, 1/2 in. 29 piece set, size range 1/16 in to 1/2 in by 64ths. High speed steel, 118 deg point. Titanium nitride coated.

 

Volterin Titanium Step Drill Bit Set Multiple Hole with Automatic Center Punch 3-Piece Set  Total 24 Sizes  3-12mm4-12mm 4-20mm High Speed Steel Drill Bits Set with Double Cutting Blades Design

Volterin Titanium Step Drill Bit Set Multiple Hole with Automatic Center Punch, 3-Piece Set | Total 24 Sizes | 3-12mm/4-12mm/ 4-20mm, High Speed Steel Drill Bits Set with Double Cutting Blades Design

Volterin Titanium Step Drill Bit Set Multiple Hole with Automatic Center Punch, 3-Piece Set | Total 24 Sizes | 3-12mm/4-12mm/ 4-20mm, High Speed Steel Drill Bits Set with Double Cutting Blades Design - Two-flute design clears chips faster and allows particles to escape easily, smooth cutting. Tri-flatted shank fits into power tools chuck securely and eliminates slip. Titanium | high speed steel classic high speed steel with titanium coating for proven capability and durability. Drilling holes in this multiple hole 24 sizes hole step drill bit set can drill in plastic, aluminum, copper, stainless steel and many other types of sheet metal (the board must be smaller in thickness than the height of step drill bits). Split point tip increases cutting speed with self-centering and prevents walking.

 

Drill America 13 Piece Left Hand High Speed Steel Drill Bit Set 116 - 14 x 64ths DWDLH Series

Drill America 13 Piece Left Hand High Speed Steel Drill Bit Set (1/16″ – 1/4″ x 64ths), DWDLH Series

Drill America 13 Piece Left Hand High Speed Steel Drill Bit Set (1/16″ – 1/4″ x 64ths), DWDLH Series - Round shanks allow use with a wide variety of toolholding systems. 13 piece drill bit set comes in a metal case. Reverse-flute drill bits run in the opposite (clockwise) direction from regular drill bits when making holes. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.

 

Drill America 29 Piece High Speed Steel Drill Bit Set in Round Case 116 - 12 X 64ths DWDN Series

Drill America 29 Piece High Speed Steel Drill Bit Set in Round Case (1/16″ – 1/2″ X 64ths), DWDN Series

Drill America 29 Piece High Speed Steel Drill Bit Set in Round Case (1/16″ – 1/2″ X 64ths), DWDN Series - Black oxide finish reduces wear while promoting chip and coolant flow. High-speed steel (hss) provides hardness for wear resistance. 118-degree conventional point for a range of drilling applications. Set of 29 jobber length drill bits includes inch sizes 1/16″ to 1/2″ in 1/64″ increments. Meets ansi specifications.

 

Drill America 38 Carbon Steel NPT Pipe Tap and 3764 High Speed Steel Drill Bit Set POU Series

Drill America 3/8″ Carbon Steel NPT Pipe Tap and 37/64″ High Speed Steel Drill Bit Set, POU Series

Drill America 3/8″ Carbon Steel NPT Pipe Tap and 37/64″ High Speed Steel Drill Bit Set, POU Series - Black oxide drill bit is ideal for production, maintenance or portable drilling jobs. Set comes in plastic pouch. Set contains matching npt pipe tap and high speed steel drill bit. 3/8″ carbon steel npt tap and 37/64″ hss drill bit with 1/2″ shank. Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.

 

Neiko 10260B Pro Heavy-Duty 12 HSS M2 Steel Drill Bit Set 5 Piece Clear

Neiko 10260B Pro Heavy-Duty 12″ HSS M2 Steel Drill Bit Set (5 Piece), Clear

Neiko 10260B Pro Heavy-Duty 12″ HSS M2 Steel Drill Bit Set (5 Piece), Clear - Heavy-duty 5-piece 12-inch hss m2 steel drill bit set, black/gold finish. Extra length allows for deeper drilling and for harder to reach locations. Aluminum carry case included. Tri-flat shank except 1/8-inch (round). The bit is manufactured with long lasting hss m2 steel, heat-treated, and made to last. Hss m2 steel is one of the strongest material available for drill bits, surpassing coated titanium, carbide, or cobalt drill bits. This drill bit is perfect for all purpose uses, drilling thru soft and hard materials.

 

Vermont American 10144 29-Piece High Speed Steel Drill Bit Set

Vermont American 10144 29-Piece High Speed Steel Drill Bit Set

Vermont American 10144 29-Piece High Speed Steel Drill Bit Set - 118 point configuration is ideal for general purpose drilling applications. High speed steel drill bits are ideal for drilling in wood, metal and plastic.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.