24 Best Deep Hole Saws in 2020

 

Mighty Deep Carbide Hole Saws MD-5-14diax3-14dd-CT Hole Saws One per box #ad

Mighty Deep Carbide Hole Saws MD-5-1/4diax3-1/4dd-CT Hole Saws One per box

Mighty Deep Carbide Hole Saws MD-5-1/4diax3-1/4dd-CT Hole Saws One per box #ad - 3/16″ thick heavy duty backing plate. 3-teeth per inch design. 3-1/4″ drill depth. Thin kerf thickness for fast and smooth cuts. Tungsten carbide construction.

 

BLUE BOAR 2-58 67mm MEGA Tungsten Carbide 2-14 deep hole saw #ad

BLUE BOAR 2-5/8″ (67mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 2-5/8″ (67mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw #ad - 2-1/4″ cutting depth recommend using with 18v cordless drill set on screw setting. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. Unique tungsten carbide tooth design wide kerf allows fast plug removal. Not for use with 1/2″ stud drills such as milwaukee hole hawg which will rip the teeth off .

 

Great Neck HC7D 7-In-1 Deep Hole Saw Set #ad

Great Neck HC7D 7-In-1 Deep Hole Saw Set

Great Neck HC7D 7-In-1 Deep Hole Saw Set #ad - Will cut nail embedded wood or virtually and wood and metal combination and suitable for use in mains and battery operated tools. Tungsten carbide tipped teeth for outstanding cutting performance and product durability. 1-5/8-inches cutting depth. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. A cost effective solution for cutting nail imbedded wood, or wood and metal combination, reinforced concrete and fiberglass.

 

BLUE BOAR 4-12 115mm MEGA Tungsten Carbide 2-14 deep hole saw #ad

BLUE BOAR 4-1/2″ (115mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 4-1/2″ (115mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw #ad - Unique tungsten carbide tooth design wide kerf allows fast plug removal. Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. Not for use with 1/2″ stud drills such as milwaukee hole hawg which will rip the teeth off . 2-1/4″ cutting depth recommend using with 18v cordless drill set on screw setting.

 

BLUE BOAR 1-12 38mm MEGA Tungsten Carbide 2-14 deep hole saw #ad

BLUE BOAR 1-1/2″ (38mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 1-1/2″ (38mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw #ad - Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. Unique tungsten carbide tooth design wide kerf allows fast plug removal. Not for use with 1/2″ stud drills such as milwaukee hole hawg which will rip the teeth off . 2-1/4″ cutting depth best when used with 18v cordless drill set on screw setting. Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included.

 

Mighty Deep Bi Metal Hole Saws MD-7-12diax3-14dd-BM Hole Saws One per box #ad

Mighty Deep Bi Metal Hole Saws MD-7-1/2diax3-1/4dd-BM Hole Saws One per box

Mighty Deep Bi Metal Hole Saws MD-7-1/2diax3-1/4dd-BM Hole Saws One per box #ad - 3/16″ thick heavy duty backing plate. 3-3/4″ drill depth. Thin kerf thickness for fast and smooth cuts. 4/6 variable tooth design. High speed cobalt bi-metal construction.

 

2 Bi-metal Deep Hole Saw #ad

2″ Bi-metal Deep Hole Saw

2″ Bi-metal Deep Hole Saw #ad - Deep hole saw. Hole saw. A cost effective solution for cutting nail imbedded wood, or wood and metal combination, reinforced concrete and fiberglass. Will cut nail embedded wood or virtually and wood and metal combination and suitable for use in mains and battery operated tools. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster.

 

7 Blade Deep Hole Saw #ad

7 Blade Deep Hole Saw

7 Blade Deep Hole Saw #ad - Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. 1-5/8-inches cutting depth. Will cut nail embedded wood or virtually and wood and metal combination and suitable for use in mains and battery operated tools. A cost effective solution for cutting nail imbedded wood, or wood and metal combination, reinforced concrete and fiberglass. Tungsten carbide tipped teeth for outstanding cutting performance and product durability.

 

Mighty Deep Bi Metal Hole Saws MD-2-12diax3-14dd-BM Hole Saws One per box #ad

Mighty Deep Bi Metal Hole Saws MD-2-1/2diax3-1/4dd-BM Hole Saws One per box

Mighty Deep Bi Metal Hole Saws MD-2-1/2diax3-1/4dd-BM Hole Saws One per box #ad - 3-1/4″ drill depth. High speed cobalt bi-metal construction. Thin kerf thickness for fast and smooth cuts. 4/6 variable tooth design. 3/16″ thick heavy duty backing plate.

 

BLUE BOAR 2-18 54mm MEGA Tungsten Carbide 2-14 deep hole saw #ad

BLUE BOAR 2-1/8″ (54mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 2-1/8″ (54mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw #ad - Unique tungsten carbide tooth design wide kerf allows fast plug removal. Not for use with 1/2″ stud drills such as milwaukee hole hawg which will rip the teeth off . Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. 2-1/4″ cutting depth recommend using with 18v cordless drill set on screw setting. Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included.

 

BLUE BOAR 3-18 80mm MEGA Tungsten Carbide 2-14 deep hole saw #ad

BLUE BOAR 3-1/8″ (80mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 3-1/8″ (80mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw #ad - 2-1/4″ cutting depth recommend using with 18v cordless drill set on screw setting. Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. Unique tungsten carbide tooth design wide kerf allows fast plug removal. Not for use with 1/2″ stud drills such as milwaukee hole hawg which will rip the teeth off . Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws.

 

QS-9X6HS Qwik Seal 9-in OD x 6-in Deep Hole Saw for Plastic Pipe #ad

QS-9X6HS Qwik Seal 9-in. OD x 6-in. Deep Hole Saw for Plastic Pipe

QS-9X6HS Qwik Seal 9-in. OD x 6-in. Deep Hole Saw for Plastic Pipe #ad - A cost effective solution for cutting nail imbedded wood, or wood and metal combination, reinforced concrete and fiberglass. Deep hole saw. Will cut nail embedded wood or virtually and wood and metal combination and suitable for use in mains and battery operated tools. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Hole saw.

 

Mighty Deep Bi Metal Hole Saws MD-2-34diax3-14dd-BM Hole Saws One per box #ad

Mighty Deep Bi Metal Hole Saws MD-2-3/4diax3-1/4dd-BM Hole Saws One per box

Mighty Deep Bi Metal Hole Saws MD-2-3/4diax3-1/4dd-BM Hole Saws One per box #ad - 3-1/4″ drill depth. High speed cobalt bi-metal construction. 4/6 variable tooth design. Thin kerf thickness for fast and smooth cuts. 3/16″ thick heavy duty backing plate.

 

IIT 56200 2-Inch Deep Hole Saw 7-Piece by IIT #ad

IIT 56200 2-Inch Deep Hole Saw, 7-Piece by IIT

IIT 56200 2-Inch Deep Hole Saw, 7-Piece by IIT #ad - Works with all water based paints. 3 piece set. Size 1/2 inches. Multipurpose.

 

BLUE BOAR 2-12 64mm MEGA Tungsten Carbide 2-14 deep hole saw #ad

BLUE BOAR 2-1/2″ (64mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 2-1/2″ (64mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw #ad - Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. Unique tungsten carbide tooth design wide kerf allows fast plug removal. 2-1/4″ cutting depth recommend using with 18v cordless drill set on screw setting. Not for use with 1/2″ stud drills such as milwaukee hole hawg which will rip the teeth off . Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws.

 

Mighty Deep Carbide Hole Saws MD-500diax3-14dd-CT Hole Saws One per box #ad

Mighty Deep Carbide Hole Saws MD-5.00diax3-1/4dd-CT Hole Saws One per box

Mighty Deep Carbide Hole Saws MD-5.00diax3-1/4dd-CT Hole Saws One per box #ad - 3-1/4″ drill depth. 3-teeth per inch design. Tungsten carbide construction. Thin kerf thickness for fast and smooth cuts. 3/16″ thick heavy duty backing plate.

 

Mighty Deep Carbide Hole Saws MD-7-12diax3-14dd-CT Hole Saws One per box #ad

Mighty Deep Carbide Hole Saws MD-7-1/2diax3-1/4dd-CT Hole Saws One per box

Mighty Deep Carbide Hole Saws MD-7-1/2diax3-1/4dd-CT Hole Saws One per box #ad - 3-3/4″ drill depth. Thin kerf thickness for fast and smooth cuts. 3-teeth per inch design. Tungsten carbide construction. 3/16″ thick heavy duty backing plate.

 

Mighty Deep Bi Metal Hole Saws MD-200diax3-14dd-BM Hole Saws One per box #ad

Mighty Deep Bi Metal Hole Saws MD-2.00diax3-1/4dd-BM Hole Saws +One per box

Mighty Deep Bi Metal Hole Saws MD-2.00diax3-1/4dd-BM Hole Saws +One per box #ad - 3-1/4″ drill depth. 3/16″ thick heavy duty backing plate. 4/6 variable tooth design. High speed cobalt bi-metal construction. Thin kerf thickness for fast and smooth cuts.

 

BLUE BOAR 1-34 45mm MEGA Tungsten Carbide 2-14 deep hole saw #ad

BLUE BOAR 1-3/4″ (45mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 1-3/4″ (45mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw #ad - Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. Unique tungsten carbide tooth design wide kerf allows fast plug removal. Not for use with 1/2″ stud drills such as milwaukee hole hawg which will rip the teeth off . 2-1/4″ cutting depth best when used with 18v cordless drill set on screw setting. Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included.

 

BLUE BOAR 1-14 32mm MEGA Tungsten Carbide 2-14 deep hole saw #ad

BLUE BOAR 1-1/4″ (32mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 1-1/4″ (32mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw #ad - Use any 1/2″-20 thread hole saw arbor and any standard 3-3/4″ or longer pilot bit. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. 2-1/4″ cutting depth best when used with 18v cordless drill set on screw setting. Unique tungsten carbide tooth design wide kerf allows fast plug removal. Not for use with 1/2″ stud drills such as milwaukee hole hawg which will rip the teeth off .

 

BLUE BOAR 3-12 89mm MEGA Tungsten Carbide 2-14 deep hole saw #ad

BLUE BOAR 3-1/2″ (89mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 3-1/2″ (89mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw #ad - Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. Not for use with 1/2″ stud drills such as milwaukee hole hawg which will rip the teeth off . Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. Unique tungsten carbide tooth design wide kerf allows fast plug removal. 2-1/4″ cutting depth recommend using with 18v cordless drill set on screw setting.

 

BLUE BOAR 6 152mm MEGA Tungsten Carbide 2-14 deep hole saw #ad

BLUE BOAR 6″ (152mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 6″ (152mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw #ad - Unique tungsten carbide tooth design wide kerf allows fast plug removal. 2-1/4″ cutting depth recommend using with 18v cordless drill set on screw setting. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. Not for use with 1/2″ stud drills such as milwaukee hole hawg which will rip the teeth off . Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included.

 

Mighty Deep Bi Metal Hole Saws MD-4-12diax3-14dd-BM Hole Saws One per box #ad

Mighty Deep Bi Metal Hole Saws MD-4-1/2diax3-1/4dd-BM Hole Saws One per box

Mighty Deep Bi Metal Hole Saws MD-4-1/2diax3-1/4dd-BM Hole Saws One per box #ad - 3-1/4″ drill depth. 4/6 variable tooth design. 3/16″ thick heavy duty backing plate. High speed cobalt bi-metal construction. Thin kerf thickness for fast and smooth cuts.

 

BLUE BOAR 58 16mm MEGA Tungsten Carbide 2-14 deep hole saw #ad

BLUE BOAR 5/8″ (16mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 5/8″ (16mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw #ad - Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off . Use any 1/2″-20 thread hole saw arbor and any standard 3-3/4″ or longer pilot bit. 2-1/4″ cutting depth recommend using with 18v cordless drill set on screw setting. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. Unique tungsten carbide tooth design wide kerf allows fast plug removal.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.