24 Most Wanted 10 24 Threads for 2020

 

Nylon 66 Thumb Screw Plain Finish White Knurled Head Slotted Drive Flat Point Meets ASTM D4066ASTM D6779 1-14 Length Fully Threaded 10-24 Threads Pack of 100

Nylon 6/6 Thumb Screw, Plain Finish, White, Knurled Head, Slotted Drive, Flat Point, Meets ASTM D4066/ASTM D6779, 1-1/4″ Length, Fully Threaded, #10-24 Threads (Pack of 100)

Nylon 6/6 Thumb Screw, Plain Finish, White, Knurled Head, Slotted Drive, Flat Point, Meets ASTM D4066/ASTM D6779, 1-1/4″ Length, Fully Threaded, #10-24 Threads (Pack of 100) - Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations. Driven by a flat-bladed driver. Thumb screws allow for simple “by-hand” installation. Knurled head provides extra grip for manual tightening. Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads.

 

410 Stainless Steel Self-Drilling Screw Plain Finish Wafer Head Phillips Drive 3 Drill Point 10-24 Thread Size 1-12 Length Pack of 25

410 Stainless Steel Self-Drilling Screw, Plain Finish, Wafer Head, Phillips Drive, #3 Drill Point, #10-24 Thread Size, 1-1/2″ Length (Pack of 25)

410 Stainless Steel Self-Drilling Screw, Plain Finish, Wafer Head, Phillips Drive, #3 Drill Point, #10-24 Thread Size, 1-1/2″ Length (Pack of 25) - 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Plain surface has no finish or coating. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Steel Pan Head Machine Screw Black Zinc Plated Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 3 Length Fully Threaded Import Pack of 50

Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 3″ Length, Fully Threaded, Import (Pack of 50)

Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 3″ Length, Fully Threaded, Import (Pack of 50) - Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. . They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw.

 

Brass Small Pattern Machine Screw Hex Nut Plain Finish 10-24 Thread Size 516 Width Across Flats 764 Thick Pack of 100

Brass Small Pattern Machine Screw Hex Nut, Plain Finish, #10-24 Thread Size, 5/16″ Width Across Flats, 7/64″ Thick (Pack of 100)

Brass Small Pattern Machine Screw Hex Nut, Plain Finish, #10-24 Thread Size, 5/16″ Width Across Flats, 7/64″ Thick (Pack of 100) - The brass small pattern machine screw hex nut has a plain finish. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. The nut has a small pattern design, meaning it is narrower than a standard machine screw hex nut for use in areas with limited space. . It has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut. Brass provides corrosion resistance and offers thermal and electrical conductivity. Several different nut styles fit a variety of application and installation requirements. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. The material is nonmagnetic. Some nuts have a self-locking mechanism, such as a nylon patch or distorted threads, that makes them suitable for applications with a high amount of vibration.

 

Steel Truss Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 1 Length Fully Threaded Imported Pack of 100

Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 1″ Length, Fully Threaded, Imported (Pack of 100)

Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 1″ Length, Fully Threaded, Imported (Pack of 100) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Plain surface has no finish or coating.

 

Steel Truss Head Machine Screw Zinc Plated Finish Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 34 Length Fully Threaded Imported Pack of 100

Steel Truss Head Machine Screw, Zinc Plated Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 3/4″ Length, Fully Threaded, Imported (Pack of 100)

Steel Truss Head Machine Screw, Zinc Plated Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 3/4″ Length, Fully Threaded, Imported (Pack of 100) - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Zinc plating resists corrosion and has a reflective appearance. Slotted drive has a linear slot for use with a flat-blade driver. Hex head tightens from the side with a wrench, enabling use when there is no space above for a driver. Steel is often used in applications where strength is the primary consideration.

 

Brass Acorn Nut Grade 5 Right Hand Threads 10-24 Threads Pack of 25

Brass Acorn Nut, Grade 5, Right Hand Threads, #10-24 Threads (Pack of 25)

Brass Acorn Nut, Grade 5, Right Hand Threads, #10-24 Threads (Pack of 25) - Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. The brass acorn nut, also called a cap nut, has a domed top that covers exposed threads on rods, studs, and bolts. Brass provides corrosion resistance and offers thermal and electrical conductivity. Nut styles such as locknuts and self-locking hex nuts have a locking mechanism that makes them suitable for applications with a high amount of vibration. The material is nonmagnetic. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. Several different nut styles fit a variety of application and installation requirements. .

 

Steel Standard U-Style Clip-On Nut Plain Finish 10-24 Thread Size For 0025-004 Material Thickness 0203 Edge Distance Pack of 25

Steel Standard U-Style Clip-On Nut, Plain Finish, #10-24 Thread Size, For 0.025″-0.04″ Material Thickness, 0.203″ Edge Distance (Pack of 25)

Steel Standard U-Style Clip-On Nut, Plain Finish, #10-24 Thread Size, For 0.025″-0.04″ Material Thickness, 0.203″ Edge Distance (Pack of 25) - Plain surface has no. Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold. Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Steel is often used in applications where strength is the primary consideration.

 

Black Oxide Alloy Steel Hex Socket Head Cap Screw Self Locking 10-24 Thread Size 34 Length Fully Threaded Pack of 25

Black Oxide Alloy Steel Hex Socket Head Cap Screw, Self Locking, #10-24 Thread Size, 3/4″ Length, Fully Threaded (Pack of 25)

Black Oxide Alloy Steel Hex Socket Head Cap Screw, Self Locking, #10-24 Thread Size, 3/4″ Length, Fully Threaded (Pack of 25) - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Hex washer head has a flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side. Plain surface has no finish or coating. 18-8 stainless steel provides good corrosion resistance and strength.

 

Steel Thread Cutting Screw Black Oxide Finish Pan Head Phillips Drive Type 1 10-24 Thread Size 1 Length Pack of 50

Steel Thread Cutting Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type 1, #10-24 Thread Size, 1″ Length (Pack of 50)

Steel Thread Cutting Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type 1, #10-24 Thread Size, 1″ Length (Pack of 50) - Steel is often used in applications where strength is the primary consideration. Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread cutting screw with type 1 point style has fine machine screw threads that taper down to a blunt edge with a chip clearing flute and is suitable for field replacement applications. Black oxide finish offers mild corrosion resistance and lubricity.

 

Nylon 66 Pan Head Machine Screw Black Slotted Drive 10-24 Thread Size 12 Length Fully Threaded USA Made Pack of 100

Nylon 6/6 Pan Head Machine Screw, Black, Slotted Drive, #10-24 Thread Size, 1/2″ Length, Fully Threaded, USA Made (Pack of 100)

Nylon 6/6 Pan Head Machine Screw, Black, Slotted Drive, #10-24 Thread Size, 1/2″ Length, Fully Threaded, USA Made (Pack of 100) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.

 

316 Stainless Steel Machine Screw Plain Finish Flat Head Phillips Drive 1-14 Length 10-24 Threads Pack of 25

316 Stainless Steel Machine Screw, Plain Finish, Flat Head, Phillips Drive, 1-1/4″ Length, #10-24 Threads (Pack of 25)

316 Stainless Steel Machine Screw, Plain Finish, Flat Head, Phillips Drive, 1-1/4″ Length, #10-24 Threads (Pack of 25) - 316 stainless steel provides strength and better corrosion resistance than 18-8 stainless steel. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Plain surface has no finish or coating.

 

Steel Thread Cutting Screw Zinc Plated Hex Head Slotted Drive Type F 10-24 Thread Size 12 Length Pack of 100

Steel Thread Cutting Screw, Zinc Plated, Hex Head, Slotted Drive, Type F, #10-24 Thread Size, 1/2″ Length (Pack of 100)

Steel Thread Cutting Screw, Zinc Plated, Hex Head, Slotted Drive, Type F, #10-24 Thread Size, 1/2″ Length (Pack of 100) - Steel is often used in applications where strength is the primary consideration. Slotted drive has a linear slot for use with a flat-blade driver. Hex head tightens from the side with a wrench, enabling use when there is no space above for a driver. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Zinc plating resists corrosion and has a reflective appearance.

 

Nylon 66 Pan Head Machine Screw Black 2 Phillips Drive 10-24 Thread Size 1-12 Length Fully Threaded USA Made Pack of 100

Nylon 6/6 Pan Head Machine Screw, Black, #2 Phillips Drive, #10-24 Thread Size, 1-1/2″ Length, Fully Threaded, USA Made (Pack of 100)

Nylon 6/6 Pan Head Machine Screw, Black, #2 Phillips Drive, #10-24 Thread Size, 1-1/2″ Length, Fully Threaded, USA Made (Pack of 100) - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Plain surface has no finish or coating. 18-8 stainless steel provides good corrosion resistance and strength. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes.

 

Nylon 66 Small Pattern Machine Screw Hex Nut Black 10-24 Thread Size 38 Width Across Flats 964 Thick Pack of 100

Nylon 6/6 Small Pattern Machine Screw Hex Nut, Black, #10-24 Thread Size, 3/8″ Width Across Flats, 9/64″ Thick (Pack of 100)

Nylon 6/6 Small Pattern Machine Screw Hex Nut, Black, #10-24 Thread Size, 3/8″ Width Across Flats, 9/64″ Thick (Pack of 100) - Some nuts have a self-locking mechanism, such as a nylon patch or distorted threads, that makes them suitable for applications with a high amount of vibration. It has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut. Several different nut styles fit a variety of application and installation requirements. The nut has a small pattern design, meaning it is narrower than a standard machine screw hex nut for use in areas with limited space. The material is a strong yet lightweight plastic and is nonconductive. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. Nylon 6/6 can either absorb or lose moisture, which may alter its dimensions and mechanical properties. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. The nylon 6/6 small pattern machine screw hex nut has a black color. Nylon 6/6 provides resistance to abrasion, corrosion, and many chemicals and solvents. Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand.

 

Steel Pan Head Machine Screw Zinc Plated Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 3-14 Length Fully Threaded Imported Pack of 25

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 3-1/4″ Length, Fully Threaded, Imported (Pack of 25)

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 3-1/4″ Length, Fully Threaded, Imported (Pack of 25) - Plain surface has no finish or coating. Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install. 18-8 stainless steel provides good corrosion resistance and strength. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Steel Thread Cutting Screw Black Zinc Plated Truss Head Phillips Drive Type F 10-24 Thread Size 38 Length Pack of 50

Steel Thread Cutting Screw, Black Zinc Plated, Truss Head, Phillips Drive, Type F, #10-24 Thread Size, 3/8″ Length (Pack of 50)

Steel Thread Cutting Screw, Black Zinc Plated, Truss Head, Phillips Drive, Type F, #10-24 Thread Size, 3/8″ Length (Pack of 50) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Zinc plating resists corrosion and has a black reflective appearance.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 4-12 Length Fully Threaded Import Pack of 10

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 4-1/2″ Length, Fully Threaded, Import (Pack of 10)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 4-1/2″ Length, Fully Threaded, Import (Pack of 10) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Plain surface has no finish or coating.

 

Steel Pan Head Machine Screw Black Zinc Plated Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 12 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100) - They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.

 

Brass Machine Screw Plain Finish Pan Head Phillips Drive 38 Length 10-24 Threads Pack of 100

Brass Machine Screw, Plain Finish, Pan Head, Phillips Drive, 3/8″ Length, #10-24 Threads (Pack of 100)

Brass Machine Screw, Plain Finish, Pan Head, Phillips Drive, 3/8″ Length, #10-24 Threads (Pack of 100) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Brass provides corrosion resistance and offers thermal and electrical conductivity. Pan head has a flat top and short vertical sides with a rounded top edge. Plain surface has no finish or coating.

 

Nylon 66 Pan Head Machine Screw Off-White 2 Phillips Drive 10-24 Thread Size 1 Length Fully Threaded USA Made Pack of 100

Nylon 6/6 Pan Head Machine Screw, Off-White, #2 Phillips Drive, #10-24 Thread Size, 1″ Length, Fully Threaded, USA Made (Pack of 100)

Nylon 6/6 Pan Head Machine Screw, Off-White, #2 Phillips Drive, #10-24 Thread Size, 1″ Length, Fully Threaded, USA Made (Pack of 100) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 316 stainless steel provides strength and better corrosion resistance than 18-8 stainless steel. Plain surface has no finish or coating. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface.

 

Morton Stainless Steel Knurled Head Nuts Inch Size 10-24 Thread Size 716 Length 12 Diameter

Morton Stainless Steel Knurled Head Nuts, Inch Size, 10-24 Thread Size, 7/16″ Length, 1/2″ Diameter

Morton Stainless Steel Knurled Head Nuts, Inch Size, 10-24 Thread Size, 7/16″ Length, 1/2″ Diameter - Full interior thread. Diamond knurl. Made from 300 series stainless steel.

 

18-8 Stainless Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 2 Length Fully Threaded Imported Pack of 25

18-8 Stainless Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 2″ Length, Fully Threaded, Imported (Pack of 25)

18-8 Stainless Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 2″ Length, Fully Threaded, Imported (Pack of 25) - They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. . Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 78 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 7/8″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 7/8″ Length, Fully Threaded, Import (Pack of 100) - Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.