25 Best and Coolest Belt Sandpapers for 2020

 

ABN Belt Sand Paper Abrasive Belts Sandpaper for Belt Sander Aluminum Oxide Sanding Belts 3x18 Inch 40 Grit 10-Pack

ABN Belt Sand Paper Abrasive Belts Sandpaper for Belt Sander, Aluminum Oxide Sanding Belts 3×18 Inch 40 Grit 10-Pack

ABN Belt Sand Paper Abrasive Belts Sandpaper for Belt Sander, Aluminum Oxide Sanding Belts 3×18 Inch 40 Grit 10-Pack - Easy to use back of coarse grit sandpaper belt is marked with grit number approximately every 9 inches (229cm) bi-directional tape joint allows belts to be run in either direction, but an arrow on the inside of the belt shows the intended install direction premature wear will result from moving sander laterally against the grain of the belt, to prevent breaking, use proper technique. Reduce buildup constructed from premium blue-fired aluminum oxide grain closed coat material with grinding aid to reduce heat and buildup and allow for longer life than sticky (adhesive) psa sandpaper if your sander heats and gums up quickly, we suggest running a belt cleaner (sold separately) against the belt and taking more frequent breaks to allow your belt sander to cool. Package contents sander sandpaper package includes (10) 3×18 inch 40 grit belt sanding belts (76cm x 457cm) so you restock less to spend less time searching for the right size and more time finishing the job. Use your sander fits any sander that uses 3×18 inch sanding belt size of belt required for your sander should be labeled on sander nameplate to measure belt size of existing belt, use a fabric tape measure to measure the width x distance around belt to measure the belt size required without an existing belt, run tape measure around belt rollers and tighten, then measure distance from bottom (beginning of tape measure) and where it lies on looped tape measure end, then measure roller width. Finish your project the abn | 3×18 inch 40 grit belt sander belts 10-pack is a package of coarse-grit belt sand paper for heavy sanding, stripping, roughing up the surface, finishing, grinding, deburring, and general sanding on wood, plastic, fiberglass, and both ferrous metal (steel, stainless steel, cast iron, carbon steel) and non-ferrous metals (aluminum, titanium, brass, bronze, copper) waterproof sandpaper for light wet use and is perfect for knife making, shaping, and sharpening.

 

Gator 3-Pack 80-Grit 3-in W x 18-in L Sanding Belt Sandpaper Red Resin

Gator 3-Pack 80-Grit 3-in W x 18-in L Sanding Belt Sandpaper Red Resin

Gator 3-Pack 80-Grit 3-in W x 18-in L Sanding Belt Sandpaper Red Resin - For use on wood, metal, fiberglass and painted surfaces. For power belt sanders. Bi-directional. Red resin. Heavy x-weight cloth.

 

WEN 6502SP2 120-Grit 4 x 36 Belt Sander Sandpaper 3 Pack

WEN 6502SP2 120-Grit 4 x 36″ Belt Sander Sandpaper (3 Pack)

WEN 6502SP2 120-Grit 4 x 36″ Belt Sander Sandpaper (3 Pack) - This paper is designed to fit with the wen 6502 4 x 36-inch belt sander with 6-inch disc, but also has a universal design to allow for compatibility with many other models of 4 x 36-inch belt/disc sanders. Remember when the surface of your wood had a nice and smooth finish the wen 120-grit 4 x 36-inch belt sander sandpaper package includes three pieces of high-quality sandpaper. Remember when your sandpaper provided maximum performance on wood, metal, plastic, and many other materials remember wen.

 

uxcell 3 X 18 Inch Sanding Belts 40 Grit Aluminum Oxide Sanding Belt Sandpaper for Portable Belt Sander 10 Pcs

uxcell 3 X 18 Inch Sanding Belts 40 Grit Aluminum Oxide Sanding Belt Sandpaper for Portable Belt Sander 10 Pcs

uxcell 3 X 18 Inch Sanding Belts 40 Grit Aluminum Oxide Sanding Belt Sandpaper for Portable Belt Sander 10 Pcs - Good performance, high production efficiency, sharp abrasive particles on abrasive belt, large cutting capacity light weight of abrasive belt and low grinding energy consumption less heat, good heat dissipation, high accuracy and small surface roughness. Material, the sanding belt is made from premium open coat aluminum oxide grain, features good abrasion resistance, anti-static and anti-clogging. Package includes, 10 x sanding belts. Craftsmanship, these 3”x18” sanding belts feature a heat and moisture resistant material, and were designed with expertly crafted seams that won’t break under pressure. Wide application, supporting all types of abrasive belt machine, special machine polishing machine etc widely used in metallurgy, machinery, light industry, leather, metal, wood and metal products, grinding and polishing.

 

POWERTEC 110850 3 x 18 Inch Sanding Belts  180 Grit Aluminum Oxide Sanding Belt  Premium Sandpaper for Portable Belt Sander - 10 Pack

POWERTEC 110850 3 x 18 Inch Sanding Belts | 180 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper for Portable Belt Sander – 10 Pack

POWERTEC 110850 3 x 18 Inch Sanding Belts | 180 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper for Portable Belt Sander – 10 Pack - Premium grade made with our superior x-weight clothed backing, an open coat aluminum oxide grain, and an impressive resin on resin bond that ensures long lasting performance. Craftsmanship these 3″x18″ sanding belts feature a heat and moisture resistant material, and were designed with expertly crafted seams that won’t break under pressure. Usage works with an assortment of belt sanding machines and applications, providing a heavy duty stripping and sanding tool for wood, aluminum, fiberglass, rubber, plastic and non-ferrous metals. Gritty available in a wide range of uniformed grit, 40/ 60/ 80/ 100/ 120/ 150/ 180/ 240/ 320/ 400 grit.

 

uxcell 4 x 24 Inch Sanding Belts 40 Grit Aluminum Oxide Sanding Belt Sandpaper for Portable Belt Sander 10 Pcs

uxcell 4 x 24 Inch Sanding Belts 40 Grit Aluminum Oxide Sanding Belt Sandpaper for Portable Belt Sander 10 Pcs

uxcell 4 x 24 Inch Sanding Belts 40 Grit Aluminum Oxide Sanding Belt Sandpaper for Portable Belt Sander 10 Pcs - Material, the sanding belt is made from premium open coat aluminum oxide grain, features good abrasion resistance, anti-static and anti-clogging. Craftsmanship, these 4”x24” sanding belts feature a heat and moisture resistant material, and were designed with expertly crafted seams that won’t break under pressure. Good performance, high production efficiency, sharp abrasive particles on abrasive belt, large cutting capacity light weight of abrasive belt and low grinding energy consumption less heat, good heat dissipation, high accuracy and small surface roughness. Package includes, 10 x sanding belts. Wide application, supporting all types of abrasive belt machine, special machine polishing machine etc widely used in metallurgy, machinery, light industry, leather, metal, wood and metal products, grinding and polishing.

 

WEN 6318SP120 120-Grit 3 x 18 Sanding Belt Sandpaper 10 Pack

WEN 6318SP120 120-Grit 3 x 18″ Sanding Belt Sandpaper (10 Pack)

WEN 6318SP120 120-Grit 3 x 18″ Sanding Belt Sandpaper (10 Pack) - Attack wood, plastic, metal or a variety of other surface materials. Universal design fits the majority of 3 x 18-inch belt sanders. Includes ten pieces of 120-grit sandpaper. Designed to fit the wen 6318 3 x 18-inch belt sander. Perfect for material removal and resurfacing.

 

POWERTEC 414232S 1 x 42 Sanding Belts Silicon Carbide Abrasive 320 Grit Sandpaper - 10 Pack

POWERTEC 414232S 1″ x 42″ Sanding Belts, Silicon Carbide Abrasive 320 Grit Sandpaper – 10 Pack

POWERTEC 414232S 1″ x 42″ Sanding Belts, Silicon Carbide Abrasive 320 Grit Sandpaper – 10 Pack - Versatility for applications on hardwood, hard metal, plastics and other low tensile strength material. Includes 1 inch by 42 inch sanding belts (10 pack). Gold standard silicon carbide abrasive outperforms aluminum oxide in specific applications, and features optimal strength, good thermal conductivity, corrosion resistance, and impact resistance. X-weight cloth backing withstands heavy sanding and grinding action resin bonded for tear resistance. 320 grit sanding belts are ideal for removing paint and stained metal surfaces or for final sanding of wood finishes.

 

Milescraft 1604 SandDevil25 Hand Sander with 25 x 14 Sandpaper Belt Red

Milescraft 1604 SandDevil2.5 Hand Sander with 2.5″ x 14″ Sandpaper Belt, Red

Milescraft 1604 SandDevil2.5 Hand Sander with 2.5″ x 14″ Sandpaper Belt, Red - Patented clever lever design allows for quick & easy change/rotation of the sanding belt flip the lever open to loosen the belt flip closed and the belt will be locked securely in place. The sanddevil2 5 has a multi-surface design that provides 5 different sanding surfaces, for many different applications. East to change abrasive belts quickly and easily, using the patented clever lever. Includes standard 2 5″ x 14″, #80 grit sanding belt. Use for sanding flat, angles, curves and edges.

 

4x24 Sanding Belts  40 Grit Aluminum Oxide Sander Belts  Premium Craftman Belt Sandpaper18 Pack4x24in40 Grit

4×24 Sanding Belts | 40 Grit Aluminum Oxide Sander Belts | Premium Craftman Belt Sandpaper,18 Pack(4x24in,40 Grit)

4×24 Sanding Belts | 40 Grit Aluminum Oxide Sander Belts | Premium Craftman Belt Sandpaper,18 Pack(4x24in,40 Grit) - ➤【Application】 works with 4×24 belt sander , provide a heavy duty stripping and sanding tool for wood, aluminum, fiberglass, rubber, plastic and non-ferrous metals. ➤【Durable】anti-static and washable, plus an additive in the resin to resist loading, features good abrasion resistance, anti-clogging. ➤【firm belt interface】precision engineered bi-directional tape joint anti-clogging stearate to reduce heat and buildup resin over resin bonding for long belt life. ➤【Premium material】made from premium open coat aluminum oxide grain, features good abrasion resistance,anti-static,resist moisture and heat. ➤【What you’ll get】18 pack 4×24 belt sander sanding belts 40 grit and 1 pair of safe working gloves.

 

uxcell 3 x 18 Inch Sanding Belts 240 Grit Aluminum Oxide Sanding Belt Sandpaper for Portable Belt Sander 10 Pcs

uxcell 3 x 18 Inch Sanding Belts 240 Grit Aluminum Oxide Sanding Belt Sandpaper for Portable Belt Sander 10 Pcs

uxcell 3 x 18 Inch Sanding Belts 240 Grit Aluminum Oxide Sanding Belt Sandpaper for Portable Belt Sander 10 Pcs - Material, the sanding belt is made from premium open coat aluminum oxide grain, features good abrasion resistance, anti-static and anti-clogging. Wide application, supporting all types of abrasive belt machine, special machine polishing machine etc widely used in metallurgy, machinery, light industry, leather, metal, wood and metal products, grinding and polishing. Package includes, 10 x sanding belts. Good performance, high production efficiency, sharp abrasive particles on abrasive belt, large cutting capacity light weight of abrasive belt and low grinding energy consumption less heat, good heat dissipation, high accuracy and small surface roughness. Craftsmanship, these 3”x18” sanding belts feature a heat and moisture resistant material, and were designed with expertly crafted seams that won’t break under pressure.

 

WEN 6321SP60 60-Grit 3 x 21 Sanding Belt Sandpaper 10 Pack

WEN 6321SP60 60-Grit 3 x 21″ Sanding Belt Sandpaper (10 Pack)

WEN 6321SP60 60-Grit 3 x 21″ Sanding Belt Sandpaper (10 Pack) - Designed to fit the wen 6321 3 x 21-inch belt sander. Universal design fits the majority of 3 x 21-inch belt sanders. Attack wood, plastic, metal or a variety of other surface materials. Includes ten pieces of 60-grit sandpaper. Perfect for material removal and resurfacing.

 

uxcell 25 x 13 Inch Aluminum Oxide Sanding Belt Sandpaper 40 60 80 120 240 400 Grit for Portable Belt Sander 24 Pcs

uxcell 2/5 x 13 Inch Aluminum Oxide Sanding Belt Sandpaper 40 60 80 120 240 400 Grit for Portable Belt Sander 24 Pcs

uxcell 2/5 x 13 Inch Aluminum Oxide Sanding Belt Sandpaper 40 60 80 120 240 400 Grit for Portable Belt Sander 24 Pcs - Material, the sanding belt is made from premium open coat aluminum oxide grain, features good abrasion resistance, anti-static and anti-clogging. Good performance, high production efficiency, sharp abrasive particles on abrasive belt, large cutting capacity light weight of abrasive belt and low grinding energy consumption less heat, good heat dissipation, high accuracy and small surface roughness. Package includes, there are 4 pieces of sandpaper for each kind of grit, grits 40 60 80 120 240 400 grit, total 24 pcs. Craftsmanship, these 2/5”x13” sanding belts feature a heat and moisture resistant material, and were designed with expertly crafted seams that won’t break under pressure. Wide application, supporting all types of abrasive belt machine, special machine polishing machine etc widely used in metallurgy, machinery, light industry, leather, metal, wood and metal products, grinding and polishing.

 

WEN 6515SP400 400-Grit 1 x 30 Sanding Belt Sandpaper 10 Pack

WEN 6515SP400 400-Grit 1 x 30″ Sanding Belt Sandpaper (10 Pack)

WEN 6515SP400 400-Grit 1 x 30″ Sanding Belt Sandpaper (10 Pack) - Universal design fits the majority of 1 x 30-inch belt sanders. Perfect for material removal and resurfacing. Designed to fit the wen 6515 1 x 30-inch belt sander with 5-inch disc. Includes ten pieces of 400-grit sandpaper. Attack wood, plastic, metal or a variety of other surface materials.

 

WEN 6307SP80 80-Grit 12 x 18 Sanding Belt Sandpaper 10 Pack

WEN 6307SP80 80-Grit 1/2 x 18″ Sanding Belt Sandpaper (10 Pack)

WEN 6307SP80 80-Grit 1/2 x 18″ Sanding Belt Sandpaper (10 Pack) - Universal design fits the majority of 1/2-by-18-inch belt sanders. Attack wood, plastic, metal or a variety of other surface materials. Includes ten pieces of 80-grit sandpaper. Perfect for material removal and resurfacing. Designed to fit the wen 6307 variable speed detailing file sander with 1/2-by-18-inch belt.

 

3x21 Sanding Belt,Aluminum Oxide Sandpaper for Belt Sander 3x2140 80 120 150 240 Grits10 Pack3x21 Inch

3×21 Sanding Belt,Aluminum Oxide Sandpaper for Belt Sander 3×21,40 80 120 150 240 Grits,10 Pack(3×21 Inch)

3×21 Sanding Belt,Aluminum Oxide Sandpaper for Belt Sander 3×21,40 80 120 150 240 Grits,10 Pack(3×21 Inch) - ✔【premium material】made from premium open coat aluminum oxide grain, features good abrasion resistance,anti-static,resist moisture and heat. ✔【Assortment grits】10 pack 3 x 21 belt sandpaper(2 pcs of each grit40/80/120/150/240)and 1 pair of working gloves, meeting your requirements for different applications. ✔【Durable】anti-static and washable, plus an additive in the resin to resist loading, features good abrasion resistance, anti-clogging. ✔【Firm belt interface】precision engineered bi-directional tape joint anti-clogging stearate to reduce heat and buildup resin over resin bonding for long belt life. ✔【Application】 works with an assortment of 3×21 inch belt sanding machines and applications, providing a heavy duty stripping and sanding tool for wood, aluminum, fiberglass, rubber, plastic and non-ferrous metals.

 

Gator 3-Pack 50-Grit 3-in W x 18-in L Sanding Belt Sandpaper Red Resin

Gator 3-Pack 50-Grit 3-in W x 18-in L Sanding Belt Sandpaper Red Resin

Gator 3-Pack 50-Grit 3-in W x 18-in L Sanding Belt Sandpaper Red Resin - Bi-directional. Heavy x-weight cloth. For use on wood, metal, fiberglass and painted surfaces. Red resin. For power belt sanders.

 

WEN 6307SP120 120-Grit 12 x 18 Sanding Belt Sandpaper 10 Pack

WEN 6307SP120 120-Grit 1/2 x 18″ Sanding Belt Sandpaper (10 Pack)

WEN 6307SP120 120-Grit 1/2 x 18″ Sanding Belt Sandpaper (10 Pack) - Attack wood, plastic, metal or a variety of other surface materials. Perfect for material removal and resurfacing. Includes ten pieces of 120-grit sandpaper. Universal design fits the majority of 1/2-by-18-inch belt sanders. Designed to fit the wen 6307 variable speed detailing file sander with 1/2-by-18-inch belt.

 

POWERTEC 110090 4 x 24 Inch Sanding Belts  80 Grit Aluminum Oxide Sanding Belt  Premium Sandpaper For Portable Belt Sander - 10 Pack

POWERTEC 110090 4 x 24 Inch Sanding Belts | 80 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper For Portable Belt Sander – 10 Pack

POWERTEC 110090 4 x 24 Inch Sanding Belts | 80 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper For Portable Belt Sander – 10 Pack - Craftsmanship these 4″x24″ sanding belts feature a heat and moisture resistant material, and were designed with expertly crafted seams that won’t break under pressure. Premium grade made with our superior x-weight clothed backing, an open coat aluminum oxide grain, and an impressive resin on resin bond that ensures long lasting performance. Usage works with an assortment of belt sanding machines and applications, providing a heavy duty stripping and sanding tool for wood, aluminum, fiberglass, rubber, plastic and non-ferrous metals. Gritty available in a wide range of uniformed grit, 40/ 60/ 80 / 100/ 120/ 150/ 180/ 240/ 320/ 400 grit.

 

uxcell 24 Pcs 25 x 13 Inch Aluminum Oxide Sanding Belt Sandpaper 60 120 240 400 800 1000 Grit for Portable Belt Sander for Vehicle

uxcell 24 Pcs 2/5 x 13 Inch Aluminum Oxide Sanding Belt Sandpaper 60 120 240 400 800 1000 Grit for Portable Belt Sander for Vehicle

uxcell 24 Pcs 2/5 x 13 Inch Aluminum Oxide Sanding Belt Sandpaper 60 120 240 400 800 1000 Grit for Portable Belt Sander for Vehicle - Material, the sanding belt is made from premium open coat aluminum oxide grain, features good abrasion resistance, anti-static and anti-clogging. Wide application, supporting all types of abrasive belt machine, special machine polishing machine etc widely used in metallurgy, machinery, light industry, leather, metal, wood and metal products, grinding and polishing. Good performance, high production efficiency, sharp abrasive particles on abrasive belt, large cutting capacity light weight of abrasive belt and low grinding energy consumption less heat, good heat dissipation, high accuracy and small surface roughness. Package includes, there are 4 pieces of sandpaper for each kind of grit, grits 60 120 240 400 800 1000 grit, total 24 pcs. Craftsmanship, these 2/5”x13” sanding belts feature a heat and moisture resistant material, and were designed with expertly crafted seams that won’t break under pressure.

 

WEN 6321SP80 80-Grit 3 x 21 Sanding Belt Sandpaper 10 Pack

WEN 6321SP80 80-Grit 3 x 21″ Sanding Belt Sandpaper (10 Pack)

WEN 6321SP80 80-Grit 3 x 21″ Sanding Belt Sandpaper (10 Pack) - Perfect for material removal and resurfacing. Designed to fit the wen 6321 3 x 21-inch belt sander. Universal design fits the majority of 3 x 21-inch belt sanders. Attack wood, plastic, metal or a variety of other surface materials. Includes ten pieces of 80-grit sandpaper.

 

WEN 6307SP320 320-Grit 12 x 18 Sanding Belt Sandpaper 10 Pack

WEN 6307SP320 320-Grit 1/2 x 18″ Sanding Belt Sandpaper (10 Pack)

WEN 6307SP320 320-Grit 1/2 x 18″ Sanding Belt Sandpaper (10 Pack) - Attack wood, plastic, metal or a variety of other surface materials. Includes ten pieces of 320-grit sandpaper. Designed to fit the wen 6307 variable speed detailing file sander with 1/2-by-18-inch belt. Universal design fits the majority of 1/2-by-18-inch belt sanders. Perfect for material removal and resurfacing.

 

uxcell 3 x 21 Inch Sanding Belts 60 Grit Aluminum Oxide Sanding Belt Sandpaper for Portable Belt Sander 10 Pcs

uxcell 3 x 21 Inch Sanding Belts 60 Grit Aluminum Oxide Sanding Belt Sandpaper for Portable Belt Sander 10 Pcs

uxcell 3 x 21 Inch Sanding Belts 60 Grit Aluminum Oxide Sanding Belt Sandpaper for Portable Belt Sander 10 Pcs - Material, the sanding belt is made from premium open coat aluminum oxide grain, features good abrasion resistance, anti-static and anti-clogging. Good performance, high production efficiency, sharp abrasive particles on abrasive belt, large cutting capacity light weight of abrasive belt and low grinding energy consumption less heat, good heat dissipation, high accuracy and small surface roughness. Wide application, supporting all types of abrasive belt machine, special machine polishing machine etc widely used in metallurgy, machinery, light industry, leather, metal, wood and metal products, grinding and polishing. Package includes, 10 x sanding belts. Craftsmanship, these 3”x21” sanding belts feature a heat and moisture resistant material, and were designed with expertly crafted seams that won’t break under pressure.

 

uxcell 4 x 24 Inch Sanding Belts 600 Grit Aluminum Oxide Sanding Belt Sandpaper for Portable Belt Sander 10 Pcs

uxcell 4 x 24 Inch Sanding Belts 600 Grit Aluminum Oxide Sanding Belt Sandpaper for Portable Belt Sander 10 Pcs

uxcell 4 x 24 Inch Sanding Belts 600 Grit Aluminum Oxide Sanding Belt Sandpaper for Portable Belt Sander 10 Pcs - Package includes, 10 x sanding belts. Wide application, supporting all types of abrasive belt machine, special machine polishing machine etc widely used in metallurgy, machinery, light industry, leather, metal, wood and metal products, grinding and polishing. Good performance, high production efficiency, sharp abrasive particles on abrasive belt, large cutting capacity light weight of abrasive belt and low grinding energy consumption less heat, good heat dissipation, high accuracy and small surface roughness. Material, the sanding belt is made from premium open coat aluminum oxide grain, features good abrasion resistance, anti-static and anti-clogging. Craftsmanship, these 4”x24” sanding belts feature a heat and moisture resistant material, and were designed with expertly crafted seams that won’t break under pressure.

 

3x18 Belt Sander Sanding Belts Aluminum Oxide Belt Sandpaper Assorted Grits 2 Each of 40 80 120 150 240 400 Grits12 Pack3x18 Inch

3×18 Belt Sander Sanding Belts, Aluminum Oxide Belt Sandpaper Assorted Grits, 2 Each of 40 80 120 150 240 400 Grits,12 Pack(3×18 Inch)

3×18 Belt Sander Sanding Belts, Aluminum Oxide Belt Sandpaper Assorted Grits, 2 Each of 40 80 120 150 240 400 Grits,12 Pack(3×18 Inch) - ➤【Assorted grits】12 pcs 3×18 belt sander sanding(2 pcs of each grit40/80/120/150/240/400 )and 1 pair of working gloves, meeting your requirements for different applications. ➤【Application】 works with an assortment of 3×18 inch belt sanding machines and applications, providing a heavy duty stripping and sanding tool for wood, aluminum, fiberglass, rubber, plastic and non-ferrous metals. ➤【Firm belt interface】precision engineered bi-directional tape joint anti-clogging stearate to reduce heat and buildup resin over resin bonding for long belt life. ➤【Durable】anti-static and washable, plus an additive in the resin to resist loading, features good abrasion resistance, anti-clogging. ➤【premium material】made from premium open coat aluminum oxide grain, features good abrasion resistance,anti-static,resist moisture and heat.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.