Best 19 Parting Tools

 

316 Robert Sorby 832H Fluted Parting Tool

3/16″ Robert Sorby #832H Fluted Parting Tool

3/16″ Robert Sorby #832H Fluted Parting Tool - Made in england. These spurs sever the wood fibers to produce a burnished finish. Ash handles. Tools have a handle length of 12″ and an overall length of 18-1/2″. This tool has a flute running along the bottom edge, creating two sharp spurs at the cutting face. The tapered profile also reduces the risk of the tool binding in the cut.

 

Crown 246X 18-Inch Diamond Parting Tool

Crown 246X 1/8-Inch Diamond Parting Tool

Crown 246X 1/8-Inch Diamond Parting Tool - Made from m2 high speed steel (rockwell 62/64) and fitted with ergonomically designed stained beech handle with heavy duty brass ferrules. Diamond sections reduces frictionand burning. Gives up to six times the edge life of carbon tools. Fine quality crown 1/8-inch 6mm diamond parting tool. Approximate tool length is 15-inches with 8-1/2-inch handle. .

 

Grizzly B831052 Diamond Parting Tool

Grizzly B831052 Diamond Parting Tool

Grizzly B831052 Diamond Parting Tool - The parallel sides make a stable tool that handles well. . Size 3/16″. The h0502 has a diamond section which reduces the risk of binding in the cut.

 

Parting Tool 14

Parting Tool, 1/4″

Parting Tool, 1/4″ - The robert sorby standard parting tool blade is for turners who prefer to make their own turning tool handles, or for use in sorby’s sovereign system handles. Made in england. It is used for parting off finished work from the waste material. High speed steel (hss) blade is 1/4″ thick. Flat parallel sides make a rigid tool that handles well. Scraper is tanged at one end and measures approximately 8-3/8″ long overall. A tang collet adapter (#85406) is required for use with the sovereign system. Also useful for fine detailing of beads and fillets.

 

Parting Tool 18

Parting Tool, 1/8″

Parting Tool, 1/8″ - This hss 1/8″ parting tool will keep a sharpened edge about six times longer than carbon steel and resist “blued” softening from overheating during grinding or from heavy turning. Ash handles offer firm hand control during use and brass ferrules prevent wood splitting from tool pressure. . Overall lengths 17″ to 21″.

 

116 Robert Sorby 830SH Slim Parting Tool

1/16″ Robert Sorby #830SH Slim Parting Tool

1/16″ Robert Sorby #830SH Slim Parting Tool - Made in england. Its 1-1/4″ blade width eliminates the flexing and twisting normally associated with thin blades. The blade has a double bevel cutting face, and is seated and triple riveted into the ash handle. Overall length is approximately 10-1/2″. This 1/16 thick hss parting tool is designed to give the cleanest and finest of cuts with the minimum of waste.

 

OMEX New Indexable Lathe Cut Off Parting Tool With 2Mm Carbide Insert 12 Mm

OMEX New Indexable Lathe Cut Off Parting Tool With 2Mm Carbide Insert 12 Mm

OMEX New Indexable Lathe Cut Off Parting Tool With 2Mm Carbide Insert 12 Mm - Parting tool. Exceptional quality tools from crown hand tools ltd, sheffield, england. Made from m2 high speed steel (rockwell 62/64). Gives up to 6 times the edge life of carbon tools.

 

Woodstock D3821 Lathe Chisel 34-Inch Diamond Parting Tool

Woodstock D3821 Lathe Chisel, 3/4-Inch Diamond Parting Tool

Woodstock D3821 Lathe Chisel, 3/4-Inch Diamond Parting Tool - 10-inch ash handle. 16-inch overall length. High speed steel.

 

HSS 18 Diamond Parting Tool By Stone Mountain Turning Tools SM7082

HSS 1/8″ Diamond Parting Tool By Stone Mountain Turning Tools SM7082

HSS 1/8″ Diamond Parting Tool By Stone Mountain Turning Tools SM7082 - This blade will stay sharp 6 time longer than carbon steel. The hardwood handles are 16″ long for better leverage and less fatigue when turning. From the woodturner just starting out to the experienced craftsman, this wood turning tool are sure to satisfy your needs. The blades are made from high speed steel hardened to rc 62-64.

 

Authentic Easy Wood Tools Pi126 Carbide Replacement Cutter for  Mid Size Parting Tool Lathe Woodturning Tool Pi126

Authentic Easy Wood Tools Pi126 Carbide Replacement Cutter for Mid Size Parting Tool Lathe Woodturning Tool Pi126

Authentic Easy Wood Tools Pi126 Carbide Replacement Cutter for Mid Size Parting Tool Lathe Woodturning Tool Pi126 - The right geometry or cutting angle is ground to the produce an edge the cuts cleanly and safely. Authentic easy wood tools 100% manufactured in the usa by the leader in carbide insert lathe woodturnings technology. The perfect grade of carbide produces the best combination of sharpness and durability. Pi126 carbide cutter designed for all the mid size parting tools 125″ thick. Optimal grinding process produces the flattest and truest cutting surfaces.

 

PFEIL Swiss Made 20mm  17 Sweep Stahli V-Parting Tool

PFEIL “Swiss Made” 20mm # 17 Sweep Stahli V-Parting Tool

PFEIL “Swiss Made” 20mm # 17 Sweep Stahli V-Parting Tool - Pfeil is undoubtedly the finest carving tool on the market, second-to-none in terms of manufacturing quality and durability. Stahli, master woodcarver and instructor at the breinz woodcarving school in switzerland, can function as a no. This multi-function tool, named for its designer, mr. Great for outlining and rounding over edges at the same time. 2 gouge or as a concaved v-parting tool. Pfeil carving tools and sets are “swiss made”. “Swiss made” implies reliability and precision.

 

Narex Full Size Professional Lathe Wood Turning Parting Tool Chisel 4 mm x 18 mm x 150 mm High Speed Tool Steel Blade 465 mm Overall Length 64 HRc 818203

Narex Full Size Professional Lathe Wood Turning Parting Tool Chisel 4 mm x 18 mm x 150 mm High Speed Tool Steel Blade 465 mm Overall Length 64 HRc 818203

Narex Full Size Professional Lathe Wood Turning Parting Tool Chisel 4 mm x 18 mm x 150 mm High Speed Tool Steel Blade 465 mm Overall Length 64 HRc 818203 - This lathe tool is made by a small tool manufacturer in the czech republic. Overall length of tool is 465 mm (19″). Handle is natural varnished european beech wood. Parting tool chisel blade is 4 mm (3/16″) thick by 18 mm (3/4″) wide by 150 mm (6″) long. Blade is heat treated high tool steel and hardened to hrc 64 and will hold an excellent edge.

 

Mid-Size Easy Parting Tool

Mid-Size Easy Parting Tool

Mid-Size Easy Parting Tool - Once dull, you can easily remove and install a fresh sharp cutter using the provided flex key. This revolutionary easy wood tool is the easiest, safest, and most versatile parting tool you will ever use, the only 1/8″ parting tool you will ever need to purchase simply advance the easy parting tool slowly into the workpiece, and begin cutting straight in. It’s that simple the exclusive wedge-lock mounting system ensures a secure hold for the replaceable carbide cutter. Say goodbye to sharpening tool comes with the easy flex key and one replacement carbide cutter. .

 

Fluted Parting Tool Midi 116

Fluted Parting Tool, “Midi”, 1/16″

Fluted Parting Tool, “Midi”, 1/16″ - This 1/16″ fluted parting tool with an overall length of 13″ and a blade length of approximately 4″ from sorby is just the right size to easily grip, yet small enough to be maneuverable. . The perfect sized tools for midi and mini lathes.

 

PFEIL Swiss Made 3mm  13 Sweep V-Parting Tool

PFEIL “Swiss Made” 3mm # 13 Sweep V-Parting Tool

PFEIL “Swiss Made” 3mm # 13 Sweep V-Parting Tool - Principal uses include outlining, detailing, texturing, undercutting, rounding over edges, and applying decoration in chip carving. Pfeil is undoubtedly the finest carving tool on the market, second-to-none in terms of manufacturing quality and durability. These tools are forged and precision ground with straight sides and v-bottom edge. “Swiss made” implies reliability and precision. Pfeil carving tools and sets are “swiss made”.

 

14 Robert Sorby 830 Parting Tool Blade

1/4″ Robert Sorby #830 Parting Tool Blade

1/4″ Robert Sorby #830 Parting Tool Blade - A tang collet adapter (#85406) is required for use with the sovereign system. For parting off finished work from the waste material. A standard parting tool blade for turners who prefer to make their own handles, or for use in sorby’s sovereign system handles. Flat parallel sides make a rigid tool that handles well. High speed steel (hss) blade is 1/4″ thick. Also useful for fine detailing of beads and fillets. Scraper is tanged at one end and measures approximately 8-3/8″ long overall. Made in england.

 

PFEIL Swiss Made 1mm 16 Sweep V-Parting Tool

PFEIL “Swiss Made” 1mm #16 Sweep V-Parting Tool

PFEIL “Swiss Made” 1mm #16 Sweep V-Parting Tool - Pfeil is undoubtedly the finest carving tool on the market, second-to-none in terms of manufacturing quality and durability. Pfeil carving tools and sets are “swiss made”. Principal uses include outlining, detailing, texturing, undercutting, rounding over edges, and applying decoration in chip carving. These tools are forged and precision ground with straight sides and v-bottom edge. “swiss made” implies reliability and precision.

 

PFEIL Swiss Made 4mm  12 Sweep V-Parting Tool

PFEIL “Swiss Made” 4mm # 12 Sweep V-Parting Tool

PFEIL “Swiss Made” 4mm # 12 Sweep V-Parting Tool - Pfeil is undoubtedly the finest carving tool on the market, second-to-none in terms of manufacturing quality and durability. Principal uses include outlining, detailing, texturing, undercutting, rounding over edges, and applying decoration in chip carving. “Swiss made” implies reliability and precision. Pfeil carving tools and sets are “swiss made”. These tools are forged and precision ground with straight sides and v-bottom edge.

 

Crown 245 14-Inch 6mm Parting Tool

Crown 245 1/4-Inch 6mm Parting Tool

Crown 245 1/4-Inch 6mm Parting Tool - 16-1/2-inch and has a beech wood stained handle. They can be used as a scraper to a chisel for making beads. Fine quality crown 1/4-inch 6mm parting tool gives turners a real choice. After your turning and finishing is done they can be used to cut your work to length. Overall length of tool is approx. 6-3/4-inch long. . Blade is made from m2 high speed steel (rockwell 62/64) and is approx. Essentially they are a chisel that cuts rather than scrapes.