Best 25 Rebar Cutter Benders

 

Hitachi 316235 Cutter for the Hitachi VB13Y Rebar Cutter and Bender 1-Pair

Hitachi 316235 Cutter for the Hitachi VB13Y Rebar Cutter and Bender, 1-Pair

Hitachi 316235 Cutter for the Hitachi VB13Y Rebar Cutter and Bender, 1-Pair - Quick setup is intuitive and easy to use. Compatible with the hitachi vb13y rebar cutter and bender. Designed for cutting and bending projects. Well-built with a simple design. Comes with a 30-day limited warranty.

 

Klutch Rebar Cutter and Bender

Klutch Rebar Cutter and Bender

Klutch Rebar Cutter and Bender - The electric rebar cutter can be mounted in a stationary position in the workstation or easily removed for use in any portable application. Cutting speed of the electric rebar cutter 35-45 seconds. Electric hydraulic rebar cutter to cut off the maximum 1″(25mm). The rebar cutter can cut off construction rebar, deformed steel bar, round steel bar and rebar rod. Voltage 110v 50/60hz, wattage 1440w.

 

Jet Equipment Rebar CutterBender 220025

Jet Equipment Rebar Cutter/Bender #220025

Jet Equipment Rebar Cutter/Bender #220025 - Mountable on a board or floor for one handed operation. Easier cutting with needle bearing design. High strength industrial jaws. 52″ handle length. Cuts and bends up to 5/8″ grade 60 rebar.

 

Kraft GG725 66-Inch Rebar CutterBender

Kraft GG725 66-Inch Rebar Cutter/Bender

Kraft GG725 66-Inch Rebar Cutter/Bender - Cast iron. Mounted to a wood board. Cuts and bends rebar up to 5/8-inch diameter.

 

Hitachi VB16Y 80-Amp Portable Variable-Speed Rebar Cutter  Bender

Hitachi VB16Y 8.0-Amp Portable Variable-Speed Rebar Cutter / Bender

Hitachi VB16Y 8.0-Amp Portable Variable-Speed Rebar Cutter / Bender - Reference markings on bending plate provide for easy position adjustment. Variable speed trigger with safety lock provides manual-like precision and control over the bending speed. 397 lbs, portable design facilitates maneuverability and ease of use. Extremely low profile design (184″l x 85″h x 91″w), yet extremely stable. 8 amp motor, iintense power (530w) that it uniformly bends up to no5 (3/8″, 1/2″, 5/8″) grade 60 rebar at a maximum angle of 180 degrees. Precision angle bends are preset and completed in just seconds (cut 31 seconds, bend 51 seconds) for consistency. With the turn of a pre-set dial, bends can be made in a variety of angles.

 

Happybuy Electric Rebar Cutter 1 8 Electric Hydraulic Rebar Cutter 110 Volt 1440W Rebar Cutter Bender 4 Second Cutting 1 25mm

Happybuy Electric Rebar Cutter 1″ #8 Electric Hydraulic Rebar Cutter 110 Volt 1440W Rebar Cutter Bender 4 Second Cutting (1″ 25mm)

Happybuy Electric Rebar Cutter 1″ #8 Electric Hydraulic Rebar Cutter 110 Volt 1440W Rebar Cutter Bender 4 Second Cutting (1″ 25mm) - Electric hydraulic rebar cutter to cut off the maximum 1″(25mm). Cutting speed of the electric rebar cutter 35-45 seconds. Voltage 110v 50/60hz, wattage 1440w. The rebar cutter can cut off construction rebar, deformed steel bar, round steel bar and rebar rod. The electric rebar cutter can be mounted in a stationary position in the workstation or easily removed for use in any portable application.

 

KAKA Industrial MS-28 28mm Metal Shears Solid Construction and Versatility Rebar Bender Rod Steel Cutter Flat Bar Steel Round Metal Cutter

KAKA Industrial MS-28 28mm Metal Shears, Solid Construction and Versatility, Rebar Bender, Rod Steel Cutter, Flat Bar Steel, Round Metal Cutter

KAKA Industrial MS-28 28mm Metal Shears, Solid Construction and Versatility, Rebar Bender, Rod Steel Cutter, Flat Bar Steel, Round Metal Cutter - More leverage will be ensured with the long handle the 28mm metal shear has a 54-inch handle that is package separately the long handle will make the cutting more effortless especially when you have a back pain, you do not need to always bend your back when every time you cut a subject. Multiple material cutting capacity kaka industrial 28mm manual hand shear is designed to cut different kinds of materials, such as rebar, rod steel, square steel and flat steel multiple cutting can be done within one machine. Great capacity is guaranteed this metal shear can cut 11-inch round steel, 15×04-inch flat steel and 1×1-inch square steel. Hardened high carbon steel balde and solid steel frame safeguards the long term use kaka industrial 28mm manual metal shear is built with heavy material and a solid cast-iron frame stability and safety can be guaranteed during the cutting also, it has the hardened high carbon steel blade will save you average 10% on replacing the blades. Effortless cutting and easy operation this manual shear is manually operated, which means you have the greatest flexibility to change any settings also, the metal shear can bolt to bench, table or the ground, which leave you with more adjustability.

 

Bon 12-359 Heavy Duty Rebar Cutter and Bender with 34-Inch Jaw Capacity

Bon 12-359 Heavy Duty Rebar Cutter and Bender with 3/4-Inch Jaw Capacity

Bon 12-359 Heavy Duty Rebar Cutter and Bender with 3/4-Inch Jaw Capacity - Built for heavy duty use, will cut or bend reinforcing steel. 3/4-inch jaw capacity designed for cutting up to 5/8-inch rebar. . Made from rugged cast iron with a 54-inch steel handle.

 

MCC Quality CB-0213 12 Re-Bar Cutter with Bender Light weight and easy to handle Suitable for cutting and bending 3 4 rebars Portable compact design with well balanced positioning of blades and rollers for suitability at job site work

MCC Quality CB-0213 1/2″ Re-Bar Cutter with Bender Light weight and easy to handle. Suitable for cutting and bending #3, #4 rebars. Portable compact design with well balanced positioning of blades and rollers for suitability at job site work

MCC Quality CB-0213 1/2″ Re-Bar Cutter with Bender Light weight and easy to handle. Suitable for cutting and bending #3, #4 rebars. Portable compact design with well balanced positioning of blades and rollers for suitability at job site work - Suitable for cutting and bending #3, #4 rebars. Re-bar cutter with bender light weight and easy to handle.

 

Kraft Tool GG726 Replacement Jaws for Rebar CutterBender

Kraft Tool GG726 Replacement Jaws for Rebar Cutter/Bender

Kraft Tool GG726 Replacement Jaws for Rebar Cutter/Bender - Our tools are created for everyday use by the professional cement finisher, brick mason, asphalt paver, tile setter, plasterer or drywall craftsman. Kraft tool’s product line is manufactured for the professional craftsman. .

 

Steel Dragon Tools RBC625 58 Manual Rebar Cutter and Bender

Steel Dragon Tools RBC625 5/8″ Manual Rebar Cutter and Bender

Steel Dragon Tools RBC625 5/8″ Manual Rebar Cutter and Bender - The sdt-rbc625 5/8″ #5 rebar capacity manual rebar cutter and bender features sturdy & durable construction that offers fast, easy cutting or bending of grade 60 rebar. It can easily be bolted to the floor or workpiece allowing you to operate the tool with just one hand. Steel dragon tools® rbc625 5/8″ manual rebar cutter and benderideal for concrete reinforcement jobs both big and small. 4lbs. Jaws are made of high carbon alloy steel & replacements are available. Cutting capacity 5/8″ #5 rebar (16mm) grade 60max material hardness hrc 48handle length 50″ long handle gives more leveragebending angle 0-180 degreesoffers two-in-one combination of cutting and bending rebarjaw type shear cutideal for concrete reinforcement jobsno-slip handle grip and a lifting chain & ring to make it easier to carry to and from the job sitesturdy & durable construction can be bolted to floor or board for easy one-hand operationjaws are made of high carbon alloy steelnet weight 42.

 

HIT Tools 22-RC16D-3 Rebar Cutter and Bender 58 RedBlack

HIT Tools 22-RC16D-3 Rebar Cutter and Bender, 5/8″, Red/Black

HIT Tools 22-RC16D-3 Rebar Cutter and Bender, 5/8″, Red/Black - Industrial/professional grade tool made in japan. Can bend in a 4″ diameter in 180 degree bend. Drop forged high grade alloy steel with special heat treatment. Can be mounted on wooden board for extra stability. 180 degree bends create a wide 4″ arc. Dual cutting cavities 1/2″ and 5/8″ rebar (up to grade 60 hardness).

 

Tolman Tool OPEN-CB Rebar Open Cutter-Bender

Tolman Tool OPEN-CB Rebar Open Cutter-Bender

Tolman Tool OPEN-CB Rebar Open Cutter-Bender - This rugged device cuts 5/8-inch diameter 60-grade rebar, and bends 3/4-inch diameter 60-grade rebar simply and efficiently. This rebar cutter-bender from tolman tool eliminates the through-feed system and allows you to view exactly where you want to make a cut.

 

Hitachi 319712 Center Roller D38 for the Hitachi VB16Y Rebar Cutter and Bender

Hitachi 319712 Center Roller (D38) for the Hitachi VB16Y Rebar Cutter and Bender

Hitachi 319712 Center Roller (D38) for the Hitachi VB16Y Rebar Cutter and Bender - Designed for angle attachment assembly. Quick setup is intuitive and easy to use. Compatible with the hitachi vb16y rebar cutter and bender. Comes with a 30-day limited warranty. Well-built with a simple design.

 

Hit Tools 22-RC16D Manual Rebar Cutter Bender

Hit Tools 22-RC16D Manual Rebar Cutter & Bender

Hit Tools 22-RC16D Manual Rebar Cutter & Bender - Well-built with a simple design. Quick setup is intuitive and easy to use. Model 22-rc16d is able to bend #5 180 degrees over 4″(exceeds aci specs). Designed for angle attachment assembly. Comes with a 30-day limited warranty.

 

SDT RBC625 58 Manual Rebar Cutter and Bender Replacement Jaw Blades High Carbon Alloy Steel

SDT RBC625 5/8″ Manual Rebar Cutter and Bender Replacement Jaw Blades, High Carbon Alloy Steel

SDT RBC625 5/8″ Manual Rebar Cutter and Bender Replacement Jaw Blades, High Carbon Alloy Steel - Sdt rbc625 5/8″ manual rebar cutter and bender replacement jaw blades, high carbon alloy steelreplacement high carbon alloy steel jaws for 5/8″ rebar cutter and benderfits sdt-rbc625 5/8″ rebar cutter and benderpart number sdt-rbc625-bl.

 

Hitachi 319714 Center Roller D62 for the Hitachi VB16Y Rebar Cutter and Bender

Hitachi 319714 Center Roller (D62) for the Hitachi VB16Y Rebar Cutter and Bender

Hitachi 319714 Center Roller (D62) for the Hitachi VB16Y Rebar Cutter and Bender - Quick setup is intuitive and easy to use. Designed for angle attachment assembly. Comes with a 30-day limited warranty. Compatible with the hitachi vb16y rebar cutter and bender. Well-built with a simple design.

 

Kraft Tool GG725-04 Handle Bracket for Rebar CutterBender

Kraft Tool GG725-04 Handle Bracket for Rebar Cutter/Bender

Kraft Tool GG725-04 Handle Bracket for Rebar Cutter/Bender - Kraft tool’s product line is manufactured for the professional craftsman. Our tools are created for everyday use by the professional cement finisher, brick mason, asphalt paver, tile setter, plasterer or drywall craftsman.

 

Tolman Tool  Replacement Cutter Jaw Set for Rebar Cutter Bender OCB1 OCB2

Tolman Tool Replacement Cutter Jaw Set for Rebar Cutter Bender, OCB1+ OCB2

Tolman Tool Replacement Cutter Jaw Set for Rebar Cutter Bender, OCB1+ OCB2 - Rugged aluminum alloy construction with durable, baked enamel finish. Set of short and long jaw cutters. And since it’s tekton, it’s always guaranteed, so go ahead, take it on. Calibrated to bend tubing to angles up to 180 degrees. Three-channel design accommodates 1/4, 5/16, and 3/8 in od tubing.

 

Hitachi 319706 Cutter Set for the Hitachi VB16Y Rebar Cutter and Bender 1-Pair

Hitachi 319706 Cutter Set for the Hitachi VB16Y Rebar Cutter and Bender, 1-Pair

Hitachi 319706 Cutter Set for the Hitachi VB16Y Rebar Cutter and Bender, 1-Pair - Designed for cutting and bending projects. Compatible with the hitachi vb16y rebar cutter and bender. Comes with a 30-day limited warranty. Quick setup is intuitive and easy to use. Well-built with a simple design.

 

MCC Tools 58 high quality open jaw Rebar Cutter with Bender SCB-16 easy cut Bending diameter 2 12 One or two step operation can bend 90 degree to 180 degree TOP OF THE LINE QUALITY PRODUCT

MCC Tools 5/8″ high quality open jaw Rebar Cutter with Bender SCB-16 easy cut Bending diameter 2 1/2″, One or two step operation can bend 90 degree to 180 degree TOP OF THE LINE QUALITY PRODUCT

MCC Tools 5/8″ high quality open jaw Rebar Cutter with Bender SCB-16 easy cut Bending diameter 2 1/2″, One or two step operation can bend 90 degree to 180 degree TOP OF THE LINE QUALITY PRODUCT - Reinforced overall stress points for optimum durability & tool life. We give free shipping for 2 or more of this item via request. Bending diameter 2 1/2″, one or two step operation can bend 90 degree to 180 degree. Portable compact design with well balanced positioning of blades. Llight, only 38 lbs to take on any jobsite enforced stress points for optimum durability.

 

JET 220019 RCB-16NDLX 58-Inch Capacity Manual Rebar Cutter and Bender

JET 220019 RCB-16NDLX 5/8-Inch Capacity Manual Rebar Cutter and Bender

JET 220019 RCB-16NDLX 5/8-Inch Capacity Manual Rebar Cutter and Bender - 5/8″ capacity. Can be bolted to the floor or a board. Cuts and bends grade 60 rebar. 52″ long handle.

 

Hitachi 319713 Center Roller D50 for the Hitachi VB16Y Rebar Cutter and Bender

Hitachi 319713 Center Roller (D50) for the Hitachi VB16Y Rebar Cutter and Bender

Hitachi 319713 Center Roller (D50) for the Hitachi VB16Y Rebar Cutter and Bender - Designed for angle attachment assembly. Comes with a 30-day limited warranty. Compatible with the hitachi vb16y rebar cutter and bender. Well-built with a simple design. Quick setup is intuitive and easy to use.

 

Bon 12-690 Open End Rebar Cutter Bender

Bon 12-690 Open End Rebar Cutter Bender

Bon 12-690 Open End Rebar Cutter Bender - . The jaws on the bon open end rebar cutter and bender are made from high carbon alloy tool steel for extreme strength. Open jaw is designed for easy rebar placement when cutting. Will cut and bend up to and including 5/8-inch rebar rod.

 

Tolman Tool HUB-CB Rebar Hub Cutter-Bender

Tolman Tool HUB-CB Rebar Hub Cutter-Bender

Tolman Tool HUB-CB Rebar Hub Cutter-Bender - The cutter-bushings are less expensive and have longer tool-life. Up to 60 grade rebar. Can cut and bend 3/4-inch rebar. Double ended cutter bushings. Ships at 642-pounds.