Best and Coolest 19 Aircraft Tools

 

Aircraft Tool Supply Bucking Bar Set 10 Pieces

Aircraft Tool Supply Bucking Bar Set (10 Pieces)

Aircraft Tool Supply Bucking Bar Set (10 Pieces) - Includes the following bucking bars 140, 141, 142, 147, 148, 149, 150, 153, 154 and 161. Heat treated. Polished working surfaces.

 

Aircraft Tool Supply Rivet Removal Tool

Aircraft Tool Supply Rivet Removal Tool

Aircraft Tool Supply Rivet Removal Tool - S. Note replacement bits for the rivet removal tool are our “l” series threaded drill bits (e. G. 5000-40l). Rivets are cleanly removed without damage to the rivet hole or aircraft skin. Made in u. Fits any 1/4″ air or electric drill. A. Our rivet removal tool comes complete with four drill bits and guides for removing 3/32″, 1/8″, 5/32″ and 3/16″ universal head (an470) solid rivets.

 

Aircraft Tool Supply Ats Rivet Spot Sandblaster

Aircraft Tool Supply Ats Rivet Spot Sandblaster

Aircraft Tool Supply Ats Rivet Spot Sandblaster - Ideal for sand-blasting rivets to remove corrosion and oxidization or other spotted areas. The abrasive is re-circulated, no mess to clean up. Contains 4 rubber nozzles for flat surfaces, panel edges, and inside and outside corners. Operates on 60 psi. This self-contained sand blaster gets down to the bare metal.

 

Aircraft Tool Supply Ats 90 Degree Angle Air Drill

Aircraft Tool Supply Ats 90 Degree Angle Air Drill

Aircraft Tool Supply Ats 90 Degree Angle Air Drill - 65″ (16 mm). 08″ (27 mm)2,800 rpmhead width. Excellent speed control, and has a solid, well-balanced feel. Spindle 1/4″-28 threadhead length 1. 33 hp (. This is the drill you need to get into those tight spaces. It has a head height of just over an inch, and produces enough torque at 2800 rpm to drill through steel. 25 kw)10″ (254 mm) overall lengthvariable speed controlfull 1 year warranty.

 

Aircraft Tool Supply Rivet Fan Spacing Tool

Aircraft Tool Supply Rivet Fan Spacing Tool

Aircraft Tool Supply Rivet Fan Spacing Tool - The clever accordion action of the fan spacer allows you to set up rivet holes with deadly accuracy. This tool is just what you need for lining up those rivet holes. It just doesn’t get any easier than this, folks. Simply expand or contract the tool to get the spacing you’re looking for and start laying out your holes.

 

Aircraft Tool Supply Strap Duplicator 21 12

Aircraft Tool Supply Strap Duplicator #21. 12″

Aircraft Tool Supply Strap Duplicator #21. 12″ - Inverted duplicators allow you to locate a hole from the back of an overlapping sheet. Inverted drill bushing type. 12″ working length. Size #21.

 

Aircraft Tool Supply Plier Hi-Lok Removal Tool

Aircraft Tool Supply Plier, Hi-Lok Removal Tool

Aircraft Tool Supply Plier, Hi-Lok Removal Tool - Manufactured from high carbon steel for extra strength and durability. The diamond cut jaws of these hi-lok removal pliers will grip the fastener from the top or bottom of the offset head.

 

Aircraft Tool Supply Rivet Set Mix Straight

Aircraft Tool Supply Rivet Set Mix, Straight

Aircraft Tool Supply Rivet Set Mix, Straight - For universal and flush style rivets. . Includes 3/32, 1/8, 5/32, 3/16, and flat rivet sets.

 

Aircraft Tool Supply Spark Plug Cleaner

Aircraft Tool Supply Spark Plug Cleaner

Aircraft Tool Supply Spark Plug Cleaner - Cleans any size plug without changing grommet. Ready to use. Has 2-way valve (blast or air) and comes complete with abrasive powder. .

 

Aircraft Tool Supply Cable Tensiometer 15-70 Lbs

Aircraft Tool Supply Cable Tensiometer 15-70 Lbs

Aircraft Tool Supply Cable Tensiometer 15-70 Lbs - Accuracy within +/-10 percent. Factory calibrated. This tool provides easy, direct reading, low cost, high quality and accuracy. Cable sizes 1/16″ 3/32″ & 1/8″. Range 15-70 lbs in 1 lb increments. . It’s designed compact as to fit through inspection holes.

 

Aircraft Tool Supply Hex Power Driver Drill Extension 10

Aircraft Tool Supply Hex Power Driver Drill Extension (10″)

Aircraft Tool Supply Hex Power Driver Drill Extension (10″) - 10″ extension length. Used to extend threaded drill bits, pilot cutters, or any other cutter with a 1/4-28 thread. Has a 1/4″ hex drive on the shank end to fit a drill or screwdriver, and a 1/4-28 internal (female) thread at the other.

 

Aircraft Tool Supply Drill Guide Bushing Kit

Aircraft Tool Supply Drill Guide & Bushing Kit

Aircraft Tool Supply Drill Guide & Bushing Kit - Contains dh01 drill housing, db-40 drill bushing (#40), db-30 drill bushing (#30), db-21 drill bushing (#21), and db-10 drill bushing (#10). Save money with our combo drill bushing kit.

 

Aircraft Tool Supply Adel Clamp Installer

Aircraft Tool Supply Adel Clamp Installer

Aircraft Tool Supply Adel Clamp Installer - These pliers make cushion clamp installation so easy that you will no longer dread the installation process. This tool securely and simply clamps the entire assembly together and leaves the hardware holes lined up. Finally there is a simple way to install adel type cushioned clamps no more fumbling with tedious ineffective techniques to install adel type clamps. You will easily achieve professional results clamping and securing hoses and wiring, especially multiple clamp installations. The mechanic is free to use both hands to fit the hardware.

 

Aircraft Tool Supply Rivet Cutter

Aircraft Tool Supply Rivet Cutter

Aircraft Tool Supply Rivet Cutter - Cuts from 3/32 to 1/4 diameter rivets. . Cuts same length every time with use of leaf spacers.

 

Aircraft Tool Supply 90 Degree Angle Air Drill Pan American Nova Series

Aircraft Tool Supply 90 Degree Angle Air Drill (Pan American Nova Series)

Aircraft Tool Supply 90 Degree Angle Air Drill (Pan American Nova Series) - , 10″ overall length, head size is 1″ x 5/8″ diameter, accepts 1/4″x 28 threaded drill bits. This new air drill packs a lot of power into a very compact form. Specifications 2800 rpm at. 33 hp, 1. . 6 lbs. Includes a safety throttle lever to prevent accidental activation of the drill. And the angle head can be rotated 360º relative the handle to orient it properly for drilling while allowing you to grip the drill comfortably. The head, at only 1″ long by 5/8″ diameter, can fit into the tightest areas. It delivers enough speed and torque to drill into most materials with ease.

 

Aircraft Tool Supply Squeezer Set Mix 6 Pieces 12

Aircraft Tool Supply Squeezer Set Mix (6 Pieces) 1/2″

Aircraft Tool Supply Squeezer Set Mix (6 Pieces) 1/2″ - 1/2″ body length. Standard 187 shank. Includes 3/32″, 1/8″, 5/32″, and 3/16″ universal head sets plus 2 flush sets.

 

Aircraft Tool Supply Flush Rivet Set

Aircraft Tool Supply Flush Rivet Set

Aircraft Tool Supply Flush Rivet Set - 401 shank. Rivet set, straight, 1″ flush, 4″ long,.

 

Aircraft Tool Supply Drill Gauge 60 Holes

Aircraft Tool Supply Drill Gauge 60 Holes

Aircraft Tool Supply Drill Gauge 60 Holes - Drill gauge, number sizes, 60 holes.

 

Aircraft Tool Supply Screw Paint Cutter An10

Aircraft Tool Supply Screw Paint Cutter (An10)

Aircraft Tool Supply Screw Paint Cutter (An10) - They work by slicing through the paint around the head of the screw so you can remove it without chipping the paint. Does not work on dome head rivets. They have a 1/4×28 thread to fit into any angle drill, or you can get the optional arbor (p/n pa36-666) for use in a drill chuck. For an10 screws. But you wouldn t have that problem if you had a set of these innovative paint cutters. You know how frustrating it can be to remove a painted over screw only to wind up chipping up the paint job.