Best and Coolest 22 Er16 Collet Chucks in 2019

 

Techniks BT50 ER16 Collet Chuck x 90mm Length #ad

Techniks BT50 ER16 Collet Chuck x 90mm Length

Techniks BT50 ER16 Collet Chuck x 90mm Length #ad - Balanced to 25,000 rpm at g25. Our part # tec-16252. Taper ground to at3 standard. 00001″ runout from taper to pocket. 90mm gage length, hex nut (included).

 

Techniks HSK63A ER16 Collet Chuck x 80mm Length #ad

Techniks HSK63A ER16 Collet Chuck x 80mm Length

Techniks HSK63A ER16 Collet Chuck x 80mm Length #ad - 00001″ runout from taper to pocket. 80mm gage length, hex nut (included). Balanced to 25,000 rpm at g25. Our part # tec-31432. Taper ground to at3 standard.

 

Parlec ECN20W Wrench For ER-16 Collet Chuck - Series ER16 Size Wrench #ad

Parlec ECN20W Wrench For ER-16 Collet Chuck – Series: ER16 Size: Wrench

Parlec ECN20W Wrench For ER-16 Collet Chuck – Series: ER16 Size: Wrench #ad - Parsymmetry┢ design for high-speed operation. Collet chucks are made in usa. Hardened to rc 52, 56 to avoid damaging collet chuck threads. Accepts din 6499-b collets. Through-spindle coolant capability. Featuresconstructed of alloy steel for long, durable service life. Collet seat taper tir =. 0002″.

 

Techniks BT40 ER16 Collet Chuck x 100mm Length #ad

Techniks BT40 ER16 Collet Chuck x 100mm Length

Techniks BT40 ER16 Collet Chuck x 100mm Length #ad - 100mm gage length, hex nut (included). Our part # tec-16153. Taper ground to at3 standard. Balanced to 25,000 rpm at g25. 00001″ runout from taper to pocket.

 

TECHNIKS 22356 CAT40 ER16 COLLET CHUCK 25K RPM MINI NUT HOLDER X 276 LENGTH #ad

TECHNIKS 22356 CAT40 ER16 COLLET CHUCK 25K RPM MINI NUT HOLDER X 2.76″ LENGTH

TECHNIKS 22356 CAT40 ER16 COLLET CHUCK 25K RPM MINI NUT HOLDER X 2.76″ LENGTH #ad - , Rigidity, and safety allowing reduced vibration at high speed to extend tool life. Techniks certified for accuracy and balance. Taper ground to at3 accuracy for maximum contact with spindle. R. I. Special power coat nut holds up to 75% tighter for best t.

 

Techniks BT30 ER16 Collet Chuck x 120mm Length #ad

Techniks BT30 ER16 Collet Chuck x 120mm Length

Techniks BT30 ER16 Collet Chuck x 120mm Length #ad - 120mm gage length. Our part # tec-16105. Taper ground to at3 standard. 00001″ runout from taper to pocket. Balanced to 25,000 rpm at g25.

 

TECHNIKS 22225 CAT40 ER16 COLLET CHUCK HEX NUT TOOL HOLDER X 276 LENGTH #ad

TECHNIKS 22225 CAT40 ER16 COLLET CHUCK HEX NUT TOOL HOLDER X 2.76″ LENGTH

TECHNIKS 22225 CAT40 ER16 COLLET CHUCK HEX NUT TOOL HOLDER X 2.76″ LENGTH #ad - Tir 00001″ measured from taper to collet pocket. Balanced to 25,000 rpm at g25. Dimensions for length (l1) 276″ and diameter (d) 108″. Our part # tec-22225. Taper ground to at3 accuracy for maximum contact with spindle.

 

Techniks CAPTO C6 x ER16 Collet Chuck x 6 Length #ad

Techniks CAPTO C6 x ER16 Collet Chuck x 6″ Length

Techniks CAPTO C6 x ER16 Collet Chuck x 6″ Length #ad - Tir 00001″ or better. Fully compatible with all c6 capto tooling. Our part # tec-14312316600. For use with er16 collets, 6″ projection length. Balanced to 25,000 rpm at g25.

 

Techniks 43 Pc 18000 RPM at G25 CAT40 Tooling Package Includes A Certificate For TIR And Balance For Each Holder4 ER32 Collet Chucks2 ER16 Collet Chucks1 ER32 18 Pc Collet SetEtc #ad

Techniks 43 Pc. 18,000 RPM at G2.5 CAT40 Tooling Package Includes A Certificate For T.I.R. And Balance For Each Holder,(4) ER32 Collet Chucks,(2) ER16 Collet Chucks,(1) ER32 18 Pc Collet Set,Etc.

Techniks 43 Pc. 18,000 RPM at G2.5 CAT40 Tooling Package Includes A Certificate For T.I.R. And Balance For Each Holder,(4) ER32 Collet Chucks,(2) ER16 Collet Chucks,(1) ER32 18 Pc Collet Set,Etc. #ad - Tir 00001″ measured from taper to collet pocket. Dimensions for length (l1) 276″ and diameter (d) 87″. Balanced to 25,000 rpm at g25. Techniks 43 pc 18,000 rpm at g25 cat40 tooling package includes a. Narrow nut diameter for better clearance.

 

MT3 ER16 Collet Chuck Tool Holder Set 8 Pcs ER16 Collets Tool Holder #ad

MT3 ER16 Collet Chuck Tool Holder Set 8 Pcs ER16 Collets Tool Holder

MT3 ER16 Collet Chuck Tool Holder Set 8 Pcs ER16 Collets Tool Holder #ad - Collets size (in inch) 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8. Back bar thread m12 x 175p. 1 mt3 collets holder, 8pcs er16 collets, 1 wrench. Alloy steel and hardened to hrc 60-62 tested tir 00001″. Taper morse taper 3, mt3.

 

TECHNIKS SIMIS CAT40 BALANCED ER16 COLLET CHUCK X 4 LENGTH TOOL CNC #ad

TECHNIKS SIMIS CAT40 BALANCED ER16 COLLET CHUCK X 4″ LENGTH TOOL CNC

TECHNIKS SIMIS CAT40 BALANCED ER16 COLLET CHUCK X 4″ LENGTH TOOL CNC #ad - Our part # tec-cat40er16-4. Balanced to 18,000 rpm’s and taper ground to high precision at3 accuracy (all meeting or exceeding industry standards). Er16 cat40 high precision collet chuck x 4″ length (er hex nut included). Techniks collet chucks are widely accepted as the best in the industry proven performance on haas, fadal, mazak, mori seiki, kitamura, hurco, and many others.

 

TECHNIKS 22227F CAT40 ER16 COLLET CHUCK COOLANT-THRU SPINDLEFLANGE X 4 LENGTH #ad

TECHNIKS 22227F CAT40 ER16 COLLET CHUCK COOLANT-THRU SPINDLE/FLANGE X 4″ LENGTH

TECHNIKS 22227F CAT40 ER16 COLLET CHUCK COOLANT-THRU SPINDLE/FLANGE X 4″ LENGTH #ad - Coolant-thru spindle or thru flange (din b). Coolflex holers are factory set for coolant-thru spindle simply remove 2 stop screws for din b coolant-thru flange simply remove 2 stop screws for din b coolant-thru flange. Dimensions for length (l1) 4″ and diameter (d) 108″. Balanced to 25,000 rpm at g25. Our part # tec-22227f.

 

Techniks HSK50E ER16 Collet Chuck x 80mm Length #ad

Techniks HSK50E ER16 Collet Chuck x 80mm Length

Techniks HSK50E ER16 Collet Chuck x 80mm Length #ad - Balanced to 25,000 rpm at g25. 00001″ runout from taper to pocket. Our part # tec-31402-e. Taper ground to at3 standard. 80mm gage length, slotted nut (included).

 

Techniks HSK100A ER16 Collet Chuck x 100mm Length #ad

Techniks HSK100A ER16 Collet Chuck x 100mm Length

Techniks HSK100A ER16 Collet Chuck x 100mm Length #ad - 00001″ runout from taper to pocket. 100mm gage length, hex nut (included). Balanced to 25,000 rpm at g25. Our part # tec-31484. Taper ground to at3 standard.

 

TECHNIKS 22227 CAT40 ER16 COLLET CHUCK HEX NUT TOOL HOLDER X 4 LENGTH #ad

TECHNIKS 22227 CAT40 ER16 COLLET CHUCK HEX NUT TOOL HOLDER X 4″ LENGTH

TECHNIKS 22227 CAT40 ER16 COLLET CHUCK HEX NUT TOOL HOLDER X 4″ LENGTH #ad - Our part # tec-22227. Balanced to 25,000 rpm at g25. Taper ground to at3 accuracy for maximum contact with spindle. Tir 00001″ measured from taper to collet pocket. Dimensions for length (l1) 4″ and diameter (d) 108″.

 

Techniks CAT50 ER16 Collet Chuck x 8 Gage Length #ad

Techniks CAT50 ER16 Collet Chuck x 8″ Gage Length

Techniks CAT50 ER16 Collet Chuck x 8″ Gage Length #ad - 00001″ runout from taper to pocket. Taper ground to at3 standard. Our part # tec-22287. Balanced to 25,000 rpm at g25. 8″ gage length, hex nut (included).

 

TECHNIKS SIMIS CAT50 BALANCED ER16 COLLET CHUCK X 6 LENGTH TOOL CNC #ad

TECHNIKS SIMIS CAT50 BALANCED ER16 COLLET CHUCK X 6″ LENGTH TOOL CNC

TECHNIKS SIMIS CAT50 BALANCED ER16 COLLET CHUCK X 6″ LENGTH TOOL CNC #ad - Er16 cat50 high precision collet chuck x 6″ length (er hex nut included). Techniks collet chucks are widely accepted as the best in the industry proven performance on haas, fadal, mazak, mori seiki, kitamura, hurco, and many others. Balanced to 18,000 rpm’s and taper ground to high precision at3 accuracy (all meeting or exceeding industry standards). Our part # tec-cat50er16-6.

 

Techniks CAT50 ER16 Collet Chuck x 6 Gage Length #ad

Techniks CAT50 ER16 Collet Chuck x 6″ Gage Length

Techniks CAT50 ER16 Collet Chuck x 6″ Gage Length #ad - 00001″ runout from taper to pocket. Balanced to 25,000 rpm at g25. 6″ gage length, hex nut (included). Taper ground to at3 standard. Our part # tec-22285.

 

WR-ER16MNWRENCH FOR ER16 COLLET CHUCKS - USING MINI-NUT #ad

WR-ER16MNWRENCH FOR ER16 COLLET CHUCKS – USING MINI-NUT

WR-ER16MNWRENCH FOR ER16 COLLET CHUCKS – USING MINI-NUT #ad - It will be according to your demand. Only the very best materials and grinding techniques used. Brought to you by ez2shop. We stand by the quality of our luxurious products. Precision ground and hand inspected.

 

TECHNIKS SIMIS CAT40 BALANCED ER16 COLLET CHUCK X 276 LENGTH TOOL CNC #ad

TECHNIKS SIMIS CAT40 BALANCED ER16 COLLET CHUCK X 2.76″ LENGTH TOOL CNC

TECHNIKS SIMIS CAT40 BALANCED ER16 COLLET CHUCK X 2.76″ LENGTH TOOL CNC #ad - Er16 cat40 high precision collet chuck x 276″ length (er hex nut included). Techniks collet chucks are widely accepted as the best in the industry proven performance on haas, fadal, mazak, mori seiki, kitamura, hurco, and many others. Our part # tec-cat40er16-276. Balanced to 18,000 rpm’s and taper ground to high precision at3 accuracy (all meeting or exceeding industry standards).

 

ETM ER16 Collet Chuck - R8 Shank - Model  4500503 #ad

ETM ER16 Collet Chuck – R8 Shank – Model # 4500503

ETM ER16 Collet Chuck – R8 Shank – Model # 4500503 #ad - Dimensions for length (l1) 4″ and diameter (d) 108″. Balanced to 25,000 rpm at g25. Our part # tec-22227f. Coolflex holers are factory set for coolant-thru spindle simply remove 2 stop screws for din b coolant-thru flange simply remove 2 stop screws for din b coolant-thru flange. Coolant-thru spindle or thru flange (din b).

 

Techniks BT50 ER16 Collet Chuck x 105mm Length #ad

Techniks BT50 ER16 Collet Chuck x 105mm Length

Techniks BT50 ER16 Collet Chuck x 105mm Length #ad - 105mm gage length, hex nut (included). Our part # tec-16253. 00001″ runout from taper to pocket. Balanced to 25,000 rpm at g25. Taper ground to at3 standard.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.