Coolest 23 1 2 Shanks

 

CMT 81262711 Straight Bit 12-Inch Shank 12-Inch Diameter

CMT 812.627.11, Straight Bit, 1/2-Inch Shank, 1/2-Inch Diameter

CMT 812.627.11, Straight Bit, 1/2-Inch Shank, 1/2-Inch Diameter - To be used on wood and wood composites. Smooth and precise cut exceptional chip ejection to allow cleaner and more constant cutting. 1-1/2-inch cutting length, 3-3/4-inch length, 2 cutting edges. Makes right-angle joints, box joints, mortise and tenons, rabbets, union, tongue and groove joints. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine).

 

Freud 1-34 In Diameter by ¾ In Double Flute Straight Router Bit with ½ Shank 12-194

Freud 1-3/4 In. Diameter by ¾ In. Double Flute Straight Router Bit with ½” Shank (12-194)

Freud 1-3/4 In. Diameter by ¾ In. Double Flute Straight Router Bit with ½” Shank (12-194) - Cuts all composite materials, plywoods, hardwoods, and softwoods. Features freud’s tico hi-density carbide cuts for maximum durability, long life and a flawless finish. Unique shear angles provide smooth finish. Ideal for general stock removal. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers.

 

CMT 81166011 Straight Bit 12-Inch Shank 58-Inch Diameter

CMT 811.660.11 Straight Bit, 1/2-Inch Shank, 5/8-Inch Diameter

CMT 811.660.11 Straight Bit, 1/2-Inch Shank, 5/8-Inch Diameter - To be used on wood and wood composites. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). Smooth and precise cut exceptional chip ejection to allow cleaner and more constant cutting. 1-inch cutting length, 2-1/2-inch length, 2 cutting edges. Makes right-angle joints, box joints, mortise and tenons, rabbets, union, tongue and groove joints.

 

3 PC 12 SHANK CARBIDE TIPPED PANEL CUTTER ROUTER BIT SET WOODWORKING TOOL

3 PC 1/2″ SHANK CARBIDE TIPPED PANEL CUTTER ROUTER BIT SET WOODWORKING TOOL

3 PC 1/2″ SHANK CARBIDE TIPPED PANEL CUTTER ROUTER BIT SET WOODWORKING TOOL - 3 pc 1/2″ shank carbide tipped panel cutter router bit set woodworking tool#001/18. 5a wide range of materials can be engraved, including copper, aluminum, metalabs, acrylic, pvc, nylon, resin, majority of plastics, wood, fibre, glass carbon. 3 large capacity chip groove, and spiral cutting edge sharp, greatly enhance the efficiency and quality of products. 4 a pack of ten 1/8″ hss engraving bits single flute replacements for your cnc machinery, these long-lasting bits are made from high quality hss for a precise, easy cutting experience. 1 shank diameter upcutcutting edge diameter 3mm.

 

EnPoint Woodworking Table Top Surface Planing Bottom Cleaning Router Bit 12 Shank 58 Cutter Dia Industrial Quality Topmount Trim Router Bit Couter-top Plunge Router Bit Edge Sink Router Bit

EnPoint® Woodworking Table Top Surface Planing Bottom Cleaning Router Bit 1/2″ Shank 5/8″ Cutter Dia Industrial Quality Topmount Trim Router Bit Couter-top Plunge Router Bit Edge Sink Router Bit

EnPoint® Woodworking Table Top Surface Planing Bottom Cleaning Router Bit 1/2″ Shank 5/8″ Cutter Dia Industrial Quality Topmount Trim Router Bit Couter-top Plunge Router Bit Edge Sink Router Bit - Works well for surfacing the spoil board on a cnc machine and homemade sliding frame to smooth the rough face of a wood slab, excellent for cutting the mortise for butt door hinges. Two carefully engineered flutes cut aggressively and cleanly, and cut per revolution yield a smooth surface, but feed rate is slightly reduced. This carbide-tipped bit use a two-flute bit where fine finish is paramount and two flutes coulld balance the bit, eliminating vibration that degrades the cut finish. Used to flatten large wood slabs and level a workbench or piece of wood runs smooth, no burning, cuts clean and fast. Mainly used for cutting and smoothing a variety of materials from wood, plywood, mdf and other wood composites, plastics, fiberglass, and solid surface etc.

 

CMT 80662911 Flush Trim bit 12-Inch Shank 1-12-Inch Cutting Length Carbide-Tipped

CMT 806.629.11 Flush Trim bit, 1/2-Inch Shank, 1-1/2-Inch Cutting Length, Carbide-Tipped

CMT 806.629.11 Flush Trim bit, 1/2-Inch Shank, 1-1/2-Inch Cutting Length, Carbide-Tipped - 1/2-inch cutting diameter, 3-45/64-inch length, bearing included. 2 sinterhip hi-density industrial chrome carbide cutting edges. For cutting hardwood/softwood, laminates use on router tables only, not for hand-held routers. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). Super-strength superior steel, non-stick orange shield coating.

 

PatternFlush Trim Router Bit 34W X 2H - 12 Shank - Yonico 14132

Pattern/Flush Trim Router Bit 3/4″W X 2″H – 1/2″ Shank – Yonico 14132

Pattern/Flush Trim Router Bit 3/4″W X 2″H – 1/2″ Shank – Yonico 14132 - Pattern/flush trim router bit 3/4″w x 2″h, 1/2″ shank, yonico 14132#001/31. Cut a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface. Eliminate the time-consuming hand-filing that normally follows each laminate cutting job. Cut a quarter-round shape bounded by fillets, known as a bead, is produced in one pass by this bit the width of one fillet is set by the pilot bearing size, while the other is controlled by the depth of cut. Cutting a fillet, using a standard corner rounding bit, leaves a sharp edge on the laminate.

 

Woodtek 122402 Router Bits Sets Chamfer Bevel 12 Pc Economy Bit Set 12 Shank

Woodtek 122402, Router Bits, Sets, Chamfer & Bevel, 12 Pc Economy Bit Set, 1/2′ Shank

Woodtek 122402, Router Bits, Sets, Chamfer & Bevel, 12 Pc Economy Bit Set, 1/2′ Shank - 20 hss twist drill bits in storage plastic case. The latest version of the set might vary slightly from the original manufacturer from time to time. For use with a power drill. Woodtek® economy router bit sets are ideal for making signs, creating strong joints or providing fine edges for molding, furniture or drawer fronts. Great for electronics, crafts, jewelry, watch making.

 

Yosoo 12 Shank Finger Glue Joint Router Bit Cone Tenon Woodwork Cutter

Yosoo 1/2” Shank Finger Glue Joint Router Bit Cone Tenon Woodwork Cutter

Yosoo 1/2” Shank Finger Glue Joint Router Bit Cone Tenon Woodwork Cutter - Perfect choice of professionals and hobbyists. Using for handmaking a drawer or other woodworking, jointing wood edge to edge or end to end. Industrial grade micro grain carbide blade. Build-up & heat resistant teflon coating. It can make professional joint.

 

EnPointâ„¢ High Precision 14 Medium Carbon Steel Shank Stile and Rail Router Cutter 22mm Dia Carbide-Tipped Wainscot Paneling Router Bit Woodworking Table Edge Stepping Router Bit for PVC MDF Carbon Fiber Wood Composites Plastics

EnPointâ„¢ High Precision 1/4″ Medium Carbon Steel Shank Stile and Rail Router Cutter 22mm Dia Carbide-Tipped Wainscot Paneling Router Bit Woodworking Table Edge Stepping Router Bit for PVC MDF Carbon Fiber Wood Composites Plastics

EnPointâ„¢ High Precision 1/4″ Medium Carbon Steel Shank Stile and Rail Router Cutter 22mm Dia Carbide-Tipped Wainscot Paneling Router Bit Woodworking Table Edge Stepping Router Bit for PVC MDF Carbon Fiber Wood Composites Plastics - It is usually used for architectural and furniture molding and also be used in handled, table-mounted and cnc router. Adoption of medium carbon steel for shank and fine mirror-like finish, excellent carbide brazing premium spray-painting makes more smoother and easier chip clearance. With use of high-frequency welding comes outstanding longevity, little chance of breaking high-speed steel body for high hardness, wear-resisting and heat-resisting. Carbide-tipped cutting edge brings sharper cutting experience and high work efficiency. Mainly used for hardwood, redwood, acrylic, medium density fiber, pvc etc, using plunge form bits for routing decorative details on the face side of raised pannels or solid wood paneling, or on the edge using a fence.

 

81-002FL - 2 PC Flooring and V Joint Router Bit Set ½ Shank

81-002FL – 2 PC Flooring and V Joint Router Bit Set ½” Shank

81-002FL – 2 PC Flooring and V Joint Router Bit Set ½” Shank - 20 hss twist drill bits in storage plastic case. High quality tool for the professionals. For use with a power drill. The latest version of the set might vary slightly from the original manufacturer from time to time. Great for electronics, crafts, jewelry, watch making.

 

EnPoint 14 Medium Carbon Steel Shank Table Edge Router Bit with Double Cove and Bead 22mm Dia Carbide-Tipped Ogee Router Bit Woodworking Molding Router Bit for Plywood Wood Composites Plastics MDF

EnPoint; 1/4″ Medium Carbon Steel Shank Table Edge Router Bit with Double Cove and Bead 22mm Dia Carbide-Tipped Ogee Router Bit Woodworking Molding Router Bit for Plywood Wood Composites Plastics MDF

EnPoint; 1/4″ Medium Carbon Steel Shank Table Edge Router Bit with Double Cove and Bead 22mm Dia Carbide-Tipped Ogee Router Bit Woodworking Molding Router Bit for Plywood Wood Composites Plastics MDF - It is usually used for architectural and furniture molding and also be used in handled, table-mounted and cnc router. Medium carbon steel for shank and super fine mirror-like finish, excellent carbide brazing premium spray-painting makes more smoother and easier chip clearance. With use of high-frequency welding comes outstanding longevity, little chance of breaking high-speed steel body for high hardness, wear-resisting and heat-resisting. Carbide-tipped cutting edge brings sharper cutting experience and high work efficiency. Mainly used for hardwood, redwood, acrylic, medium density fiber, pvc etc, using plunge form bits for routing decorative details on the face side of raised pannels or solid wood paneling, or on the edge using a fence.

 

EnPoint Woodworking Table Top Surface Planing Bottom Cleaning Router Bit 12 Shank 38 Cutter Dia Industrial Quality Topmount Trim Router Bit Couter-top Plunge Router Bit Edge Sink Router Bit

EnPoint Woodworking Table Top Surface Planing Bottom Cleaning Router Bit 1/2″ Shank 3/8″ Cutter Dia Industrial Quality Topmount Trim Router Bit Couter-top Plunge Router Bit Edge Sink Router Bit

EnPoint Woodworking Table Top Surface Planing Bottom Cleaning Router Bit 1/2″ Shank 3/8″ Cutter Dia Industrial Quality Topmount Trim Router Bit Couter-top Plunge Router Bit Edge Sink Router Bit - Two carefully engineered flutes cut aggressively and cleanly, and cut per revolution yield a smooth surface, but feed rate is slightly reduced. Mainly used for cutting and smoothing a variety of materials from wood, plywood, mdf and other wood composites, plastics, fiberglass, and solid surface etc. Used to flatten large wood slabs and level a workbench or piece of wood runs smooth, no burning, cuts clean and fast. This carbide-tipped bit use a two-flute bit where fine finish is paramount and two flutes coulld balance the bit, eliminating vibration that degrades the cut finish. Works well for surfacing the spoil board on a cnc machine and homemade sliding frame to smooth the rough face of a wood slab, excellent for cutting the mortise for butt door hinges.

 

EnPoint Woodworking Solid Carbide Top Ball Bearing Beading Router Bit 12 Shank 12 Radius Cutter 716 Cut Height Industrial Quality Rounding Over Fillet Ball Bearing Guide Edging Router Bit

EnPoint® Woodworking Solid Carbide Top Ball Bearing Beading Router Bit 1/2″ Shank 1/2″ Radius Cutter 7/16″ Cut Height Industrial Quality Rounding Over Fillet Ball Bearing Guide Edging Router Bit

EnPoint® Woodworking Solid Carbide Top Ball Bearing Beading Router Bit 1/2″ Shank 1/2″ Radius Cutter 7/16″ Cut Height Industrial Quality Rounding Over Fillet Ball Bearing Guide Edging Router Bit - This unique bit “breaks” the sharp edge of the laminate, as it cuts the fillet together with a quarter-round shape in one pass. Cutting a fillet, using a standard corner rounding bit, leaves a sharp edge on the laminate. Cut a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface. Cut a quarter-round shape bounded by fillets, known as a bead, is produced in one pass by this bit the width of one fillet is set by the pilot bearing size, while the other is controlled by the depth of cut. Eliminate the time-consuming hand-filing that normally follows each laminate cutting job.

 

EnPoint Woodworking Carbide-Tipped Beadboard Router Bit 12 Shank 58 Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit

EnPoint® Woodworking Carbide-Tipped Beadboard Router Bit 1/2″ Shank 5/8″ Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit

EnPoint® Woodworking Carbide-Tipped Beadboard Router Bit 1/2″ Shank 5/8″ Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit - Carbide cutting edges produce a very smooth, clean finish that rarely requires sanding to finish. Cut a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface etc. Outstanding tool longevity, a tendency to stay sharper, mirror like carbide finish, excellent carbide brazing. Teflon coating for build-up heat resistant high grade carbide keeps its edge with no edge chipping. Rout decorative grooves on solid wood or mdf panels and surfaces with a handheld or cnc router form edges with a hand router equipped with an edge guide, or on a router table.

 

EnPointâ„¢ 14 Medium Carbon Steel Shank Stile and Rail Router Cutter 22mm Dia Carbide-Tipped Wainscot Paneling Router Bit Woodworking Table Edge Stepping Router Bit for PVC MDF Carbon Fiber Wood Composites Plastics

EnPointâ„¢ 1/4″ Medium Carbon Steel Shank Stile and Rail Router Cutter 22mm Dia Carbide-Tipped Wainscot Paneling Router Bit Woodworking Table Edge Stepping Router Bit for PVC MDF Carbon Fiber Wood Composites Plastics

EnPointâ„¢ 1/4″ Medium Carbon Steel Shank Stile and Rail Router Cutter 22mm Dia Carbide-Tipped Wainscot Paneling Router Bit Woodworking Table Edge Stepping Router Bit for PVC MDF Carbon Fiber Wood Composites Plastics - With use of high-frequency welding comes outstanding longevity, little chance of breaking premium steel body for high hardness, wear-resisting and heat-resisting. It is usually used for architectural and furniture molding and also be used in handled, table-mounted and cnc router. Medium carbon steel for shank and super fine mirror-like finish, excellent carbide brazing premium spray-painting makes more smoother and easier chip clearance. Carbide-tipped cutting edge brings sharper cutting experience and high work efficiency. Mainly used for hardwood, redwood, acrylic, medium density fiber, pvc etc, using plunge form bits for routing decorative details on the face side of raised pannels or solid wood paneling, or on the edge using a fence.

 

CMT 84485011 Classical Ogee Bit 12-Inch Shank Radius from 316 to 14-Inch Carbide-Tipped

CMT 844.850.11 Classical Ogee Bit, 1/2-Inch Shank, Radius from 3/16 to 1/4-Inch, Carbide-Tipped

CMT 844.850.11 Classical Ogee Bit, 1/2-Inch Shank, Radius from 3/16 to 1/4-Inch, Carbide-Tipped - Inverted ogee profile on your workpiece, with the concave edge adjacent to the upper surface. 1-1/8-inch diameter, 29/64-inch cutting length. Non-stick orange shield coatingtm, anti-kickback design, equipped with bearing. 2 sinterhip hi-density industrial chrome carbidetm cutting edges for long-lasting performance. Cmt bits were rated the best overall in comparison to other brand (test by wood magazinetm).

 

Amana 45437 2 FLUTE 1932 DIA12 SHANK

Amana 45437 2 FLUTE 19/32 DIA.1/2 SHANK

Amana 45437 2 FLUTE 19/32 DIA.1/2 SHANK - Non-stick coating. Cnc precision ground. Anti-kickback design. C3 or c4 premium carbide. Prefessional grade.

 

CMT 85450711 Bull Nose Bit 12-Inch Shank 38-Inch Radius Carbide-Tipped

CMT 854.507.11 Bull Nose Bit, 1/2-Inch Shank, 3/8-Inch Radius, Carbide-Tipped

CMT 854.507.11 Bull Nose Bit, 1/2-Inch Shank, 3/8-Inch Radius, Carbide-Tipped - Non-stick orange shield coating, anti-kickback design, equipped with bearing. Create an oval edge by using a bit with a bead diameter larger than the stock thickness. For making the edges of stair treads, window sills, shelves and more. 1-3/8-inch diameter, 1-3/8-inch cutting length, 3/4-inch minor cutting length, 2-7/8-inch length. 2 sinterhip hi-density industrial chrome carbide cutting edges for long-lasting performance.

 

EnPoint Woodworking Solid Carbide Top Ball Bearing Beading Router Bit 12 Shank 38 Radius Cutter 38 Cut Height Industrial Quality Rounding Over Fillet Ball Bearing Guide Edging Router Bit

EnPoint Woodworking Solid Carbide Top Ball Bearing Beading Router Bit 1/2″ Shank 3/8″ Radius Cutter 3/8″ Cut Height Industrial Quality Rounding Over Fillet Ball Bearing Guide Edging Router Bit

EnPoint Woodworking Solid Carbide Top Ball Bearing Beading Router Bit 1/2″ Shank 3/8″ Radius Cutter 3/8″ Cut Height Industrial Quality Rounding Over Fillet Ball Bearing Guide Edging Router Bit - This unique bit “breaks” the sharp edge of the laminate, as it cuts the fillet together with a quarter-round shape in one pass. Eliminate the time-consuming hand-filing that normally follows each laminate cutting job. Cut a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface. Cut a quarter-round shape bounded by fillets, known as a bead, produced in one pass by this bit the width of one fillet is set by the pilot bearing size, while the other is controlled by the depth of cut. Cutting a fillet, using a standard corner rounding bit, leaves a sharp edge on the laminate.

 

EnPoint Woodworking Solid Carbide Top Ball Bearing Beading Router Bit 12 Shank 34 Radius Cutter 58 Cut Height Industrial Quality Rounding Over Fillet Ball Bearing Guide Edging Router Bit

EnPoint Woodworking Solid Carbide Top Ball Bearing Beading Router Bit 1/2″ Shank 3/4″ Radius Cutter 5/8″ Cut Height Industrial Quality Rounding Over Fillet Ball Bearing Guide Edging Router Bit

EnPoint Woodworking Solid Carbide Top Ball Bearing Beading Router Bit 1/2″ Shank 3/4″ Radius Cutter 5/8″ Cut Height Industrial Quality Rounding Over Fillet Ball Bearing Guide Edging Router Bit - Eliminate the time-consuming hand-filing that normally follows each laminate cutting job. This unique bit “breaks” the sharp edge of the laminate, as it cuts the fillet together with a quarter-round shape in one pass. Cut a quarter-round shape bounded by fillets, known as a bead, is produced in one pass by this bit the width of one fillet is set by the pilot bearing size, while the other is controlled by the depth of cut. Cutting a fillet, using a standard corner rounding bit, leaves a sharp edge on the laminate. Cut a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface.

 

Kempston 203411 12-Inch Shank Core Boby Bit 58-Inch Cutting Diameter by 12-Inch Cutting Length

Kempston 203411 1/2-Inch Shank, Core Boby Bit, 5/8-Inch Cutting Diameter by 1/2-Inch Cutting Length

Kempston 203411 1/2-Inch Shank, Core Boby Bit, 5/8-Inch Cutting Diameter by 1/2-Inch Cutting Length - Prefessional grade. Cnc precision ground. Anti-kickback design. Non-stick coating. C3 or c4 premium carbide.

 

EnPointâ„¢ Teflon Coating Carbide Single Flute Straight Flush Tim Bit 14 Shank 532 Cut Dia 2564 Cut Height CNC Flakeboard Plywood Dado Plunge Router Bit Woodwork Grooving Slotting Cutter

EnPointâ„¢ Teflon Coating Carbide Single Flute Straight Flush Tim Bit 1/4″ Shank 5/32″ Cut Dia 25/64″ Cut Height CNC Flakeboard Plywood Dado Plunge Router Bit Woodwork Grooving Slotting Cutter

EnPointâ„¢ Teflon Coating Carbide Single Flute Straight Flush Tim Bit 1/4″ Shank 5/32″ Cut Dia 25/64″ Cut Height CNC Flakeboard Plywood Dado Plunge Router Bit Woodwork Grooving Slotting Cutter - Teflon painting on the tool bit for preventing stickness, thus easier and smoother chip evacuation. Plunging tight corners and confined areas, sign-making, routing letter edges. For straight and square cuts, making dadoes and grooves. Medium carbon steel shank and hss main body for for high hardness, great resistance to heat and wear. Carbide-tipped cutting edge for a tendency to stay sharper and clean edge.