Coolest 23 Nail Pullers in 2020

 

PacTool International RS501 Roof Snake Shingle Nail Puller Roof Shingle Installer

PacTool International RS501 Roof Snake, Shingle Nail Puller, Roof Shingle Installer

PacTool International RS501 Roof Snake, Shingle Nail Puller, Roof Shingle Installer - Patented offset nail-slot feature -unique design helps you align roofing nails with the proper one-inch offset from the bottom edge of your the existing course. Damage-free shingles, replace and install 3-tab shingles without over-bending or striking surrounding shingles (or fingers ) with your hammer. Essential tool for roofers, the roof snake takes the bite out of replacing shingles to start and finish the job the right way. Your best friend for roof shingle replacement the roof snake makes replacing composition shingles safer, easier and more accurate than traditional methods. Claw tip, shingle nail puller claw removes nails easily from roof shingles drive the claw end under the nail and roll the nail out by twisting the roof snake.

 

Bahco 36 Nail Puller 8In

Bahco 36 Nail Puller 8In

Bahco 36 Nail Puller 8In - The nail puller is made from high performance alloy steel with a comfortable and non-slip thermoplastic grip handle with. 36 nail puller 8in. The bahco 36 nail puller is a compact tool for fast easy removal of nails in crates etc. It has a black finish and is anti-corrosion treated. The patented internal spring keeps the jaws open and the wide striking area is able to be used as with a claw hammer.

 

Air Locker AP700 Heavy Duty Professional Air Punch Nailer  Nail Remover  Nail Puller 14 Inch NPT Thread Air Inlet 80-120 PSI Pneumatic Nailer Removes 10-20 Gauge Nails

Air Locker AP700 Heavy Duty Professional Air Punch Nailer / Nail Remover / Nail Puller. 1/4 Inch NPT Thread Air Inlet. 80-120 PSI Pneumatic Nailer Removes 10-20 Gauge Nails

Air Locker AP700 Heavy Duty Professional Air Punch Nailer / Nail Remover / Nail Puller. 1/4 Inch NPT Thread Air Inlet. 80-120 PSI Pneumatic Nailer Removes 10-20 Gauge Nails - Includes punch nailer / nail remover, operating manual. Works with different types of soft and hard woods including pine, poplar, chestnut, sycamore, oak, locust, hickory, osage orange, white oak and maple. Drive nails out of the work pieces quietly, efficiently and with precision while maintaining the integrity and quality of the wood. Applications remove nails from floorboards, weatherboards, fiber sheets, skids, pallets, boards, barn lumber, sheathing and wooden decks. Packaged in cardboard box. With ap700, you no longer require to tire your hands and compromise the quality of the work piece. It does exactly what it’s supposed to do, pulls nails out of the wood. Featuring all metal heavy duty body, ap700 nail remover is a professional grade tool that can survive almost any abuse. Meet air locker ap700 nail remover. The slim elongated nose design allows you to get into cramped spaces and hardened hammer strikes powerfully to ensure that nail comes out every time. This is one powerhouse of a tool so you can throw any type of wood at it. Ap700 nail remover is designed to save tradesmen from tons of agony and sore arms from trying to drive nail pieces out of soft and hard woods. Denail your reclaimed wood like a pro. Sufficiently powerful to push nails out of hard woods, quiet, efficient and accurate, all metal body makes for sturdy and durable tool, rubberized ergonomic grip for fatigueless operation, removes or sinks nails between 10 to 20 gauge sizes, light weight die cast aluminum body, slim elongated nose gets into tight spaces, maintains quality of the work piece. It comes with an ergonomic rubberized grip so tradesmen can pull off fatigueless hours every day of the week. This tool works with pine, poplar, chestnut, sycamore, oak, locust, hickory, osage orange, white oak, maple and more.

 

20oz Slaters Hammer Nail Puller Remover Roofer Roofing Slate Tiles Construction

20oz Slaters Hammer Nail Puller Remover Roofer Roofing Slate Tiles Construction

20oz Slaters Hammer Nail Puller Remover Roofer Roofing Slate Tiles Construction - Professional tool for commercial or occasional use slater hammer has a pointed pick at one end for making holes in slates and a claw in the centre of the head for pulling out the nails at the other end of the hammer is a rectangular striking head for tile fixing all in one hammer perfect for slating roofs, tile fixing etc steel structure for strength and durability rubber coated trp handle for comfort and grip when using this tool constructed as a one piece for maximum durability head weight of 20 oz. Which makes this hammer effective but not to heavy for constant use tubular handle to keep the weight down of the item specifications total hammer length, 310mm total head length, 250mm total head weight, 20oz hammer head surface dimensions 20mm x 25mm.

 

Professional Heavy Duty Upholstery Staple Remover Nail Puller Ofiice Claw Hand Tool Pack of 1

Professional Heavy Duty Upholstery Staple Remover Nail Puller Ofiice Claw Hand Tool Pack of 1

Professional Heavy Duty Upholstery Staple Remover Nail Puller Ofiice Claw Hand Tool Pack of 1 - Super lightweight,durable hardened steel and curved handle. Used for simple removal of both staple legs from wood, cartons, boxes, furniture, etc. Heavy duty upholstery staple remover professional nail puller office hand tools. Leverage design for comfortable use, no damage to the surface of upholstery. Quick and easy to remove almost any staple or nail with much less effort.

 

Dasco Pro 100 Nail Puller 9-Inch

Dasco Pro 100 Nail Puller, 9-Inch

Dasco Pro 100 Nail Puller, 9-Inch - , Heat treated high carbon steel, black, features finishing bar. Nail pullers, nail puller, overall length 9 in. , Overall width 3 in. , Standard tool (accessory needed for tethering), thickness 1 in.

 

Estwing Nail Puller - 12 Double-Ended Pry Bar with Straight Wedge Claw End - DEP12

Estwing Nail Puller – 12″ Double-Ended Pry Bar with Straight & Wedge Claw End – DEP12

Estwing Nail Puller – 12″ Double-Ended Pry Bar with Straight & Wedge Claw End – DEP12 - Built for the pro, carpenters, wood workers, demolition crews, framers, roofers, tradesmen & serious diyers perfect for window & door trim, molding and baseboard. High leverage design, rounded head for added torque & increased leverage. Work in small spaces, the precision thin claw allows the user to access hard-to-reach and confined places. Removes headless nails, claw designed allow for headless nail removal with minimal wood damage. Forged in one piece, the most durable, longest lasting striking tools available.

 

Dead on EX9 10-58-Inch Exhumer Nail Puller

Dead on EX9 10-5/8-Inch Exhumer Nail Puller

Dead on EX9 10-5/8-Inch Exhumer Nail Puller - Built-in extractor nail pick. Limited lifetime warranty. Built-in saw wrench. S-5 grade steel invest casted. Built-in bottle opener.

 

Crescent 10 Molding Removal Pry Bar with Nail Puller - MB10

Crescent 10″ Molding Removal Pry Bar with Nail Puller – MB10

Crescent 10″ Molding Removal Pry Bar with Nail Puller – MB10 - Precision ground ends for nail pulling with less material damage. Durable high visibility red finish is corrosion-resistant. Striking face has ground surface for precision nailing. Nail slot in both claw and pry ends for access to pulling.

 

Shark Corp 21-2220 8-Inch Prybar and Nail Puller

Shark Corp 21-2220 8-Inch Prybar and Nail Puller

Shark Corp 21-2220 8-Inch Prybar and Nail Puller - Removes any nail. Measures 8 inches. This pry bar and nail puller is made with high-quality hardened steel alloy and the thinnest blade available on the market. It will pry into any tight spot with ease, doing less damage to wall and molding surfaces. The curve of the blade is designed to lift molding easily with a turn. Thinnest blade on market. Pries into tight spots. High-quality carbon steel.

 

2 Packs End Nippers Pliers End Cutting Pliers Nail Puller Tool Carpenters Pincers Cutting Nail Remover Tool for Carpenters Construction Floor Installing

2 Packs End Nippers Pliers End Cutting Pliers Nail Puller Tool Carpenters Pincers Cutting Nail Remover Tool for Carpenters Construction Floor Installing

2 Packs End Nippers Pliers End Cutting Pliers Nail Puller Tool Carpenters Pincers Cutting Nail Remover Tool for Carpenters Construction Floor Installing - Size the nail puller pliers measures 63 inch/ 16 cm in length, 26 cm/ 10 inch in thickness, suitable size for comfortable holding. Suitable for the end cutters plier is good at wire cutting and trimming, which is a good helper for construction, floor installation, carpenters, etc. Multi-duty nail puller has mated cutters, suitable for twisting, cutting, pulling, trimming, and binding wire, also great for pulling out staples and cutting off nails, screws, and other metals. Easy to use the head shape provides great movement when tightening steel mesh knots during reinforced work, gently rounded handle profile with slim, nonslip grip let you comfortably press as hard as needed. Reliable quality end-nipper cutting pliers is made with high-carbon, drop-forged, polished steel for durability and an electronic coating to help prevent rusting soft plastic coated grip for comfortable control.

 

3-in-1 Staple Gun with RemoverNail Puller Upholstery Stapler Heavy Duty Tacker Stainless Steel Brad Nail Gun for Fixing Material Carpentry FurnitureDoors And Windows1000 Staples Sliver

3-in-1 Staple Gun with Remover,Nail Puller, Upholstery Stapler, Heavy Duty Tacker Stainless Steel Brad Nail Gun, for Fixing Material, Carpentry, Furniture,Doors And Windows,1000 Staples (Sliver)

3-in-1 Staple Gun with Remover,Nail Puller, Upholstery Stapler, Heavy Duty Tacker Stainless Steel Brad Nail Gun, for Fixing Material, Carpentry, Furniture,Doors And Windows,1000 Staples (Sliver) - 100% lifetime guarantee — unlike other products, we believe in the quality of our products if you are not 100% satisfied just contact us to arrange a return and we will offer you a full refund or exchangeno risk ,add to cart now. Easily and securely — according to the ergonomic design, the hand feels more fit, more comfortable and non-slip, and more labor-saving use the depth adjustment knob on the top of the nail gun to fit the thickness of the material you are using, which will make your upholstery work easier. Save working time — anti-jam mechanism saves time on the job, adopting the principle of spring spring-back impact, it doesn’t need electricity or gas as it’s power source it adopts 586mm large all-steel fixed column, high-strength stainless steel body, surface plating treatment, durable and not easy to damage, no rust. Included 3 different staples — comes with 400pcs door-type, 200pcs u-type, 400pcs t-type staples to meet your different needs (dimensions are 4- 14mm, 10mm and 10/14mm) ideal for repairing, decoration and fastening. Ideal for repair fastening — special binding groove allows easily insertion of door-type, u-shaped, t-type three-in-one manual staples are ideal for repair, decoration and fastening to meet your various tacking needs.

 

Estwing Handy Claw Nail Puller - 10 Pry Bar with Forged Steel Construction Vinyl Cushion Grip - HC-10

Estwing Handy Claw Nail Puller – 10″ Pry Bar with Forged Steel Construction & Vinyl Cushion Grip – HC-10

Estwing Handy Claw Nail Puller – 10″ Pry Bar with Forged Steel Construction & Vinyl Cushion Grip – HC-10 - Removes headless nails, claw designed allow for headless nail removal with minimal wood damage. Curved claw leverage, added torque when pulling and prying nails or boards. Built for the pro, framers, roofers, carpenters, contractors, tradesman & serious diyers. Forged in one piece, the most durable, longest lasting striking tools available. No-slip cushion grip, comfortable, durable vinyl grip for a strong hold in all conditions.

 

Crescent 12 Indexing Nail Puller - DB12NP

Crescent 12″ Indexing Nail Puller – DB12NP

Crescent 12″ Indexing Nail Puller – DB12NP - Indexing head – 14 locking positions for quick angle adjustment up to 180 degrees for optimized leverage. Striking face – allows for claw to be driven under nails that are under the surface. Accessibility – designed to reach between studs, joists, etc.

 

Vaughan BC14 Japanese Style Nail Puller Stl Blu 14 in

Vaughan, BC14, Japanese Style Nail Puller, Stl, Blu, 14 in

Vaughan, BC14, Japanese Style Nail Puller, Stl, Blu, 14 in - 14-1/4″ length weighs 20-3/4 oz. Designed for easy wedging and minimal wood damage. Black, rust resistant finish. Made in america. Forged and tempered steel. Rocker head provides excellent leverage. Mpn bc14. Commercial brand vaughan.

 

Nail Puller  Tack Remover  Comfort Rubber Handle  Guaranteed  Metal  Home Improvement  DIY

Nail Puller | Tack Remover | Comfort Rubber Handle | Guaranteed | Metal | Home Improvement | DIY

Nail Puller | Tack Remover | Comfort Rubber Handle | Guaranteed | Metal | Home Improvement | DIY - Ingredients (1) heavy duty metal rubber handle nail & tack remover. Home improvement when you’re doing renovations or working with wood, you want a 12″ nail puller to help you pry up those nasty nails that are in the way. Demolition this tough demolition tool can be used to pull up tacks and nails, pry trim from walls and more the flat claws are engineered to slip under the nail head with the least amount of damage to wood. Home 4 tools inc quality tools at affordable prices. Nail puller this rugged 12″ nail puller has flat claws so you can get under the nail head easily.

 

VAUGHAN 7-34 Bear Claw Nail Puller

VAUGHAN 7-3/4″ Bear Claw Nail Puller

VAUGHAN 7-3/4″ Bear Claw Nail Puller - Black, rust-resistant finish. Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage.

 

Crescent 24 Adjustable Pry Bar with Nail Puller - DB24

Crescent 24″ Adjustable Pry Bar with Nail Puller – DB24

Crescent 24″ Adjustable Pry Bar with Nail Puller – DB24 - Large claw on head that adjusts for leverage in pulling nails. Recipient of the popular mechanics editor’s choice award for 2012. Crow bar end with nail puller slot. Adjustable jaws slide and clamp to fit onto objects for straightening and prying. Striking hammer head surface for striking.

 

HART 180 10 in Nail Puller

HART 180 10 in. Nail Puller

HART 180 10 in. Nail Puller - Included 3 different staples — comes with 400pcs door-type, 200pcs u-type, 400pcs t-type staples to meet your different needs (dimensions are 4- 14mm, 10mm and 10/14mm) ideal for repairing, decoration and fastening. 100% lifetime guarantee — unlike other products, we believe in the quality of our products if you are not 100% satisfied just contact us to arrange a return and we will offer you a full refund or exchangeno risk ,add to cart now. Save working time — anti-jam mechanism saves time on the job, adopting the principle of spring spring-back impact, it doesn’t need electricity or gas as it’s power source it adopts 586mm large all-steel fixed column, high-strength stainless steel body, surface plating treatment, durable and not easy to damage, no rust. Ideal for repair fastening — special binding groove allows easily insertion of door-type, u-shaped, t-type three-in-one manual staples are ideal for repair, decoration and fastening to meet your various tacking needs. Easily and securely — according to the ergonomic design, the hand feels more fit, more comfortable and non-slip, and more labor-saving use the depth adjustment knob on the top of the nail gun to fit the thickness of the material you are using, which will make your upholstery work easier.

 

21oz 600g Woodworking Garden Straight Adze Wooden Handle Nail Puller

21oz 600g Woodworking Garden Straight Adze Wooden Handle Nail Puller

21oz 600g Woodworking Garden Straight Adze Wooden Handle Nail Puller - Package includesstraight 600g adz headwooden handle. Heat treated and tempered providing high strength and durability. The unnecessary part of the handle should be cut-away, approximately a half inch from the edge of an adze. 5in or 40cm gross weight 30. 5oz or 866gplease notethe handle is removable because of the easy sharpening of the adze blade as it should be. You will receive the adze removed out of the handle and you should mount it tight. 15in or 80mm cutting edgeremovable handle for easy sharpeningspecificationsbrand tolsenmodel 58050width of the edge 3. Adzes head is made of one piece intact drop-forged carbon steel. A straight adze is used for rough dimensioning timbers, scaling bark from logs and jobs that require fast, powerful removal of lots of wood. It is a “slip fit” type of handle. Featuresgreat tool for wood scaling and removing branchesmade of durable drop-forged carbon steel with wooden handlepowder coated for resistance against steel corrosionwide 3. The approximate weight of  the head is 21oz or 600g. 15in or 80mmmade of drop-forged carbon steelhandel made of woodhandle length 15. Wooden handle provides secure grip and makes it easy to handle  when working in hand.

 

Shark CORP 21-2030 Hardened Steel Alloy Nail Pullers

Shark CORP 21-2030 Hardened Steel Alloy Nail Pullers

Shark CORP 21-2030 Hardened Steel Alloy Nail Pullers - Dropped forged construction chrome vanadium finish. Pneumatic nails tend to have weak heads that fold or shear off when you attempt to pull them out by the head. Durable, efficient nail puller for removing even the most stubborn finish nails. Especially with the proliferation of pneumatic nailers, it’s essential to have a genuine shark grip nail puller in your tool kit. Removes even embedded, headless or rusted nails. Shark grip japanese ””cat’s paw””-type nail pullers have been the choice of professional cabinet makers. Perfect for 2-1/2 to 3-inch finish nail removal. Weighs 11 pound shipped.

 

Anvil Brand Blackened Crease Nail Puller

Anvil Brand Blackened Crease Nail Puller

Anvil Brand Blackened Crease Nail Puller - It is polished at the jaws or tip and 12 1/4″ overall in length. The length of this tool assists in leverage. The jaws are designed to lock over the horseshoe nail head and along its taper, to easily remove a single nail from a creased, swedged, or fullered horseshoe. Horseshoe nails puller, or otherwise known as a crease nail puller. This black farrier’s tool is used to pull nails from the horseshoe and hoof.

 

Union Pneumatics UP-AP700 Industrial Grade Heavy Duty Professional Air Punch Nailer Nail RemoverPallet Dismantling Tool Nail kicker Pallet Denailer Nail Puller Replaces Air Locker AP700

Union Pneumatics UP-AP700 Industrial Grade Heavy Duty Professional Air Punch Nailer, Nail Remover,Pallet Dismantling Tool, Nail kicker, Pallet Denailer, Nail Puller Replaces Air Locker AP700

Union Pneumatics UP-AP700 Industrial Grade Heavy Duty Professional Air Punch Nailer, Nail Remover,Pallet Dismantling Tool, Nail kicker, Pallet Denailer, Nail Puller Replaces Air Locker AP700 - Sufficiently powerful to push nails out of hard woods, quiet, efficient and accurate, all metal body makes for sturdy and durable tool, rubberized ergonomic grip for fatigueless operation, removes or sinks nails between 10 to 20 gauge sizes, light weight die cast aluminum body, slim elongated nose gets into tight spaces, maintains quality of the work piece. Includes punch nailer / nail remover, operating manual. The slim elongated nose design allows you to get into cramped spaces and hardened hammer strikes powerfully to ensure that nail comes out every time. Featuring all metal heavy duty body, up-ap700 nail remover is a professional grade tool that can survive almost any abuse. It does exactly what its supposed to do, pulls nails out of the wood. Up-ap700 nail remover is designed to save tradesmen from tons of agony and sore arms from trying to drive nail pieces out of soft and hard woods. This tool works with pine, poplar, chestnut, sycamore, oak, locust, hickory, osage orange, white oak, maple and more. Meet union pneumatics up-ap700 nail remover. Denail your reclaimed wood like a pro. Applications remove nails from floorboards, weatherboards, fiber sheets, skids, pallets, boards, barn lumber, sheathing and wooden decks. Works with different types of soft and hard woods including pine, poplar, chestnut, sycamore, oak, locust, hickory, osage orange, white oak and maple. With up-ap700, you no longer require to tire your hands and compromise the quality of the work piece. This is one powerhouse of a tool so you can throw any type of wood at it. Drive nails out of the work pieces quietly, efficiently and with precision while maintaining the integrity and quality of the wood. Packaged in blow molded case. It comes with an ergonomic rubberized grip so tradesmen can pull off fatigueless hours every day of the week.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.