Top 15 Best Taper Pipe Taps in 2019

 

Morse Cutting Tools 86335 MARXBORE NPT Taper Pipe Taps High Speed Steel Gold and Black Finish 5 Flutes 1 - 11-12 Size #ad

Morse Cutting Tools 86335 MARXBORE NPT Taper Pipe Taps, High Speed Steel, Gold and Black Finish, 5 Flutes, 1″ – 11-1/2 Size

Morse Cutting Tools 86335 MARXBORE NPT Taper Pipe Taps, High Speed Steel, Gold and Black Finish, 5 Flutes, 1″ – 11-1/2 Size #ad - Npt taper pipe taps are commonly used for tapping pipe fittings and couplings in a wide variety of materials. Recommended for a wide variety of materials, especially soft ductile materials and materials producing long continuous chips. Assembly requires the use of a thread sealant to ensure a tight seal. Interrupted thread taper pipe tap reduce friction, increase chip capacity and enhanced coolant flow to the cutting teeth for reduced chance of torn threads and improved thread quality.

 

Morse Cutting Tools 36123 Taper Pipe Taps High-Speed Steel Bright Finish NPT Regular Thread Large Shank 4 Flutes 18-27 Size #ad

Morse Cutting Tools 36123 Taper Pipe Taps, High-Speed Steel, Bright Finish, NPT Regular Thread, Large Shank, 4 Flutes, 1/8″-27″ Size

Morse Cutting Tools 36123 Taper Pipe Taps, High-Speed Steel, Bright Finish, NPT Regular Thread, Large Shank, 4 Flutes, 1/8″-27″ Size #ad - Interrupted thread taper pipe tap reduce friction, increase chip capacity and enhanced coolant flow to the cutting teeth for reduced chance of torn threads. Recommended for a wide variety of materials, especially soft ductile materials and materials producing long continuous chips. Npt taper pipe taps are commonly used for tapping pipe fittings and couplings in a wide variety of materials. Assembly requires the use of a thread sealant to ensure a tight seal.

 

RedLine Tools RT34206 - 14-18 H4 Limit Oxide Coated HSS High-Speed Steel NPT Taper Pipe Tap #ad

RedLine Tools RT34206 – 1/4-18, H4 Limit, Oxide Coated, HSS (High-Speed Steel), NPT Taper Pipe Tap

RedLine Tools RT34206 – 1/4-18, H4 Limit, Oxide Coated, HSS (High-Speed Steel), NPT Taper Pipe Tap #ad - Coating oxide coated. Thread size/pitch 1/4-18. Type npt, taper pipe. Thread limit h4. Made in the usa.

 

Cle-Force 1700 C69509 38-18 NPT Medium Hook Carbon Steel Taper Pipe Tap Straight Flute Straight with Square Shank Bright Uncoated Finish Pack qty 1 #ad

Cle-Force 1700 C69509 3/8-18 NPT Medium Hook Carbon Steel Taper Pipe Tap, Straight Flute, Straight with Square Shank, Bright (Uncoated) Finish (Pack qty. 1)

Cle-Force 1700 C69509 3/8-18 NPT Medium Hook Carbon Steel Taper Pipe Tap, Straight Flute, Straight with Square Shank, Bright (Uncoated) Finish (Pack qty. 1) #ad - Ground thread pipe taps are standard in american standard pipe form (npt). The thread tapers 3/4″ per foot. . General purpose pipe taps are appropriate for threading a wide variety of materials, both ferrous and nonferrous. The nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap.

 

Morse Cutting Tools 36124 Taper Pipe Taps High-Speed Steel Bright Finish NPT Regular Thread 4 Flutes 14-18 Size #ad

Morse Cutting Tools 36124 Taper Pipe Taps, High-Speed Steel, Bright Finish, NPT Regular Thread, 4 Flutes, 1/4″-18″ Size

Morse Cutting Tools 36124 Taper Pipe Taps, High-Speed Steel, Bright Finish, NPT Regular Thread, 4 Flutes, 1/4″-18″ Size #ad - Recommended for a wide variety of materials, especially soft ductile materials and materials producing long continuous chips. Interrupted thread taper pipe tap reduce friction, increase chip capacity and enhanced coolant flow to the cutting teeth for reduced chance of torn threads. Npt taper pipe taps are commonly used for tapping pipe fittings and couplings in a wide variety of materials. . Assembly requires the use of a thread sealant to ensure a tight seal.

 

Titan TT93401 Taper Pipe Tap HSS Uncoated NPT 18 - 2 4 Flutes #ad

Titan TT93401 Taper Pipe Tap, HSS Uncoated, NPT, 1/8″ – 2″, 4 Flutes

Titan TT93401 Taper Pipe Tap, HSS Uncoated, NPT, 1/8″ – 2″, 4 Flutes #ad - Series 775. 1/8-27 4fl npt taper. High speed steel.

 

Cle-Force 1700 C69508 14-18 NPT Medium Hook Carbon Steel Taper Pipe Tap Straight Flute Straight with Square Shank Bright Uncoated Finish Pack qty 1 #ad

Cle-Force 1700 C69508 1/4-18 NPT Medium Hook Carbon Steel Taper Pipe Tap, Straight Flute, Straight with Square Shank, Bright (Uncoated) Finish (Pack qty. 1)

Cle-Force 1700 C69508 1/4-18 NPT Medium Hook Carbon Steel Taper Pipe Tap, Straight Flute, Straight with Square Shank, Bright (Uncoated) Finish (Pack qty. 1) #ad - General purpose pipe taps are appropriate for threading a wide variety of materials, both ferrous and nonferrous. Ground thread pipe taps are standard in american standard pipe form (npt). . The nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4″ per foot.

 

RC or ZG 18 - 28 HSS BSPT Pipe Taper Tap #ad

RC or ZG 1/8″ – 28 HSS BSPT Pipe Taper Tap

RC or ZG 1/8″ – 28 HSS BSPT Pipe Taper Tap #ad - High speed steel. Rc 1/8″ -28 bspt hss taper pipe tap.

 

Morse Cutting Tools 36127 Taper Pipe Taps High-Speed Steel Bright Finish NPT Regular Thread 5 Flutes 34-14 Size #ad

Morse Cutting Tools 36127 Taper Pipe Taps, High-Speed Steel, Bright Finish, NPT Regular Thread, 5 Flutes, 3/4″-14″ Size

Morse Cutting Tools 36127 Taper Pipe Taps, High-Speed Steel, Bright Finish, NPT Regular Thread, 5 Flutes, 3/4″-14″ Size #ad - Interrupted thread taper pipe tap reduce friction, increase chip capacity and enhanced coolant flow to the cutting teeth for reduced chance of torn threads. Recommended for a wide variety of materials, especially soft ductile materials and materials producing long continuous chips. Npt taper pipe taps are commonly used for tapping pipe fittings and couplings in a wide variety of materials. Assembly requires the use of a thread sealant to ensure a tight seal.

 

Irwin Industrial Tools 1924 HSS Cut Thread Taper Pipe Tap Set 6-Piece #ad

Irwin Industrial Tools 1924 HSS Cut Thread Taper Pipe Tap Set, 6-Piece

Irwin Industrial Tools 1924 HSS Cut Thread Taper Pipe Tap Set, 6-Piece #ad - Tapered at a rate of 3/4 inch per foot. Comes with a wooden set case. Cuts internal threads in pipes. This pipe taper tap set cuts internal threads in pipes. Ideal for pipe fittings. Tapered at a rate of 3/4-inch per foot. Set includes 1/8″, 27 npt, 1/4″, 18 npt, 3/8″, 18 npt, 1/2″, 14 npt, 3/4″, 14 npt and 1″, 11-1/2 npt pieces. Comes in a convenient wooden carrying case.

 

YG-1 Q6 Series Vanadium Alloy HSS Spiral Flute High Performance Taper Pipe Tap Hardslick Coated Round Shank with Square End Taper Chamfer 12-14 Thread Size #ad

YG-1 Q6 Series Vanadium Alloy HSS Spiral Flute High Performance Taper Pipe Tap, Hardslick Coated, Round Shank with Square End, Taper Chamfer, 1/2″-14 Thread Size

YG-1 Q6 Series Vanadium Alloy HSS Spiral Flute High Performance Taper Pipe Tap, Hardslick Coated, Round Shank with Square End, Taper Chamfer, 1/2″-14 Thread Size #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Hardslick coated. Round shanks allow use with a wide variety of toolholding systems. 1375-inches thread length.

 

116-27 NPT HIGH SPEED STEEL REGULAR THREAD TAPER PIPE TAP #ad

1/16″-27 NPT HIGH SPEED STEEL REGULAR THREAD TAPER PIPE TAP

1/16″-27 NPT HIGH SPEED STEEL REGULAR THREAD TAPER PIPE TAP #ad - High speed steel regular thread taper pipe tap, national pipe thread tapered thread, commonly used for hand and machine tapping of taper pipe threads. .

 

2-12-8 NPTF Taper Pipe Taps - HSS #ad

2-1/2″-8 NPTF Taper Pipe Taps – HSS

2-1/2″-8 NPTF Taper Pipe Taps – HSS #ad - Their nominal size is of the pipe being threaded. Taper pipe taps are utilized to thread pipe fittings.

 

38 - 18 NPTF HIGH SPEED STEEL REGULAR THREAD DRYSEAL TAPER PIPE TAP #ad

3/8″ – 18 NPTF HIGH SPEED STEEL REGULAR THREAD DRYSEAL TAPER PIPE TAP

3/8″ – 18 NPTF HIGH SPEED STEEL REGULAR THREAD DRYSEAL TAPER PIPE TAP #ad - High speed steel regular thread taper pipe tap, national pipe thread tapered fine (dryseal), designed for use where the assembled product must withstand high fluid or gas pressure without the use of a sealing compound, or where sealer cannot be applied. .

 

High Carbon Steel Taper Pipe Taps - tap 18npt pipe hanson #ad

High Carbon Steel Taper Pipe Taps – tap 1/8npt pipe hanson

High Carbon Steel Taper Pipe Taps – tap 1/8npt pipe hanson #ad - -Tapered at a rate of 3/4” per foot. -Nominal size of the tap is that of the pipe fitting being tapped. -available in national pipe taper (npt) and british standard pipe taper (bsp). -Type pipe tap. -Cutting direction right. 585-1902 this item features -cuts internal threads in pipes. -Packing type bulk. -Material high carbon steel. -Ideal for pipe fittings. -Style taper. -Applicable materials most metals.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.