Top 15 Sds Max Shanks for 2020

 

SPKLINE 4-12 Inch Wide Tile Thinset Scaling Chisel SDS-Max Shank 45 x 14 Thinset Scraper and Floor Scraper Works with 34 Shank SDS-Max Rotary Hammers and Demolition Hammers #ad

SPKLINE 4-1/2 Inch Wide Tile & Thinset Scaling Chisel SDS-Max Shank 4.5″ x 14″ Thinset Scraper and Floor Scraper Works with 3/4″ Shank SDS-Max Rotary Hammers and Demolition Hammers

SPKLINE 4-1/2 Inch Wide Tile & Thinset Scaling Chisel SDS-Max Shank 4.5″ x 14″ Thinset Scraper and Floor Scraper Works with 3/4″ Shank SDS-Max Rotary Hammers and Demolition Hammers #ad - Specialist tile & thinset removal tool —— designed particularly for the job of removing tiles, thinset, mortar, old linoleum glued to the concrete slab and other stubborn adhesives with completely clean finish without damaging the concrete subfloor it can also be used as an ice scraper to remove ice from deck and sidewalk with perfect result in winter this scaling chisel is for 3/4″ shank sds-max hammers it does not fit into sds-plus hammers and spline hammers. High efficiency and time saving —— the extra wide 45″ blade (50% more width than normal 3″ scaling chisel) removes more tile and thinset per pass it also allows you to reach into the corners or along the wall where the grinder may not be easy to reach more length (14″ long) than normal chisel is much easier and more comfortable for operation it offers you great efficiency and save you a lot of time and effort. Super quality and practical design —— made of high quality hardened steel alloy this chisel is designed with optimal geometry specifically for high impact stresses, durability and long life time. This scaling chisel is the perfect choice for removing and cleaning tiles, thinset, mortar and other stubborn adhesives ideal tool for foyer floor, kitchen and bathroom renovation used by home owners and professional contractors. This scaling chisel is for 3/4″ shank sds-max hammers it does not fit into sds-plus hammers and spline hammers standard sds-max 3/4″ shank is compatible with bosch, dewalt, milwaukee, hilti, makita, hitachi and other brand 3/4″ shank sds-max system rotary hammers and demolition hammers with chipping or chiseling function.

 

Metabo 676520000 SDS-Max Shank 4-Cutter Drill Bit 58 x 13 1per Pack #ad

Metabo 676520000 SDS-Max Shank 4-Cutter Drill Bit 5/8″ x 13″ (1per Pack)

Metabo 676520000 SDS-Max Shank 4-Cutter Drill Bit 5/8″ x 13″ (1per Pack) #ad - Drills precise round holes for ease of anchor installation and stronger anchor holding. Large volume double spiral flutes provide rapid dust removal further enhancing bit life and drilling speed. Diameter 5/8″ working length 8″ overall length 13″. Patented flute design minimizes vibration and noise thus protecting both tool and operator. Unique head design reduces friction in the hole resulting in faster drilling speed and maximum bit life.

 

DEWALT DW5832B15 12-Inch Bull Point Chisel SDS Max Shank #ad

DEWALT DW5832B15 12-Inch Bull Point Chisel SDS Max Shank

DEWALT DW5832B15 12-Inch Bull Point Chisel SDS Max Shank #ad - Bulk packs of 10 or 15 available for the most common products. Fully hardened steel body delivers increased life and durability.

 

DEWALT DW5837 12-Inch by 2-Inch Scaling Chisel SDS Max Shank #ad

DEWALT DW5837 12-Inch by 2-Inch Scaling Chisel SDS Max Shank

DEWALT DW5837 12-Inch by 2-Inch Scaling Chisel SDS Max Shank #ad - Scaling chisel (wide chisel) is used for removing tile, concrete splatter, and other excess material. For light chipping and chiseling of tile, mortar, glazing compounds, and other masonry products. For use with all brands of sds max demolition hammers and rotary hammers with chipping function. Fully hardened steel body delivers increased life and durability.

 

Hilti TE-YX Hammer Drill Bit with SDS-Max Shanks - 58 x 36 - 206515 #ad

Hilti TE-YX Hammer Drill Bit with SDS-Max Shanks – 5/8″ x 36″ – 206515

Hilti TE-YX Hammer Drill Bit with SDS-Max Shanks – 5/8″ x 36″ – 206515 #ad - Solid metal carbide headtop performance and reliability, less jamming when hitting rebar heat treated flute for less wear, ductile core, and more efficient dust removal for faster drilling te-y (sds max) connection end diameter 5/8 in working length 30 in length 36 in for use with reinforced concrete, concrete, brick, masonry, some sand-lime stone connection typete-y (sds max) working mode hammer drilling hilti pn 206515.

 

Hitachi 725793 Spline to Hitachi SDS Max Shank Adapter #ad

Hitachi 725793 Spline to Hitachi SDS Max Shank Adapter

Hitachi 725793 Spline to Hitachi SDS Max Shank Adapter #ad - Hitachi 725793 spline to sds-max rotary hammer shank extension adapter.

 

Bosch HC5023 Wild Bore Head SDS-max Shank Bit 58 x 31 x 36-Inch #ad

Bosch HC5023 Wild Bore Head SDS-max Shank Bit 5/8 x 31 x 36-Inch

Bosch HC5023 Wild Bore Head SDS-max Shank Bit 5/8 x 31 x 36-Inch #ad - Rotary hammer bit, shank shape sds max, number of cutter heads 4, bit dia. , Drilling length 31 in. 5/8 in. , overall length 36 in.

 

Metabo 676620000 SDS-Max Shank 4-Cutter Drill Bit 58 x 12 x 17 1per Pack #ad

Metabo 676620000 SDS-Max Shank 4-Cutter Drill Bit 5/8″ x 12″ x 17″ (1per Pack)

Metabo 676620000 SDS-Max Shank 4-Cutter Drill Bit 5/8″ x 12″ x 17″ (1per Pack) #ad - Patented flute design minimizes vibration and noise thus protecting both tool and operator. Drills precise round holes for ease of anchor installation and stronger anchor holding. Large volume double spiral flutes provide rapid dust removal further enhancing bit life and drilling speed. Unique head design reduces friction in the hole resulting in faster drilling speed and maximum bit life. Diameter 5/8″ working length 12″ overall length 17″.

 

Bosch HS1922 4-12 x 17 Clay Spade SDS-Max shank #ad

Bosch HS1922 4-1/2″ x 17″ Clay Spade SDS-Max shank

Bosch HS1922 4-1/2″ x 17″ Clay Spade SDS-Max shank #ad - All bosch chisels are manufactured with a proprietary heat-treat process. Ideal for general gardening and landscaping. Bosch brings innovation to concrete and masonry drilling with increased efficiency and higher durability. Bosch offers a full assortment of hammer steel points and chisels.

 

DEWALT DW5834 1-Inch by 12-Inch Cold Chisel SDS Max Shank #ad

DEWALT DW5834 1-Inch by 12-Inch Cold Chisel SDS Max Shank

DEWALT DW5834 1-Inch by 12-Inch Cold Chisel SDS Max Shank #ad - Fully hardened steel body delivers increased life and durability. 16-inches in length. Fits all brands of sds max chipping and demolition hammers. For light chipping and chiseling of tile, mortar, glazing compounds, and other masonry products. Bulk packs of 10 or 15 available for the most common products.

 

SPKLINE Demolition Bushing Tool Bit SDS-Max Shank Hammer Chisel For Concrete Masonry and Natural Stone 16-Tooth Square Bushing Head1-34 Inches Square and 9-12 Inches in Length #ad

SPKLINE Demolition Bushing Tool Bit, SDS-Max Shank Hammer Chisel For Concrete Masonry and Natural Stone, 16-Tooth Square Bushing Head,1-3/4 Inches Square and 9-1/2 Inches in Length

SPKLINE Demolition Bushing Tool Bit, SDS-Max Shank Hammer Chisel For Concrete Masonry and Natural Stone, 16-Tooth Square Bushing Head,1-3/4 Inches Square and 9-1/2 Inches in Length #ad - Sds-max shank, compatible with all brands of sds-max chipping and demolition hammers. One-piece design, 9-1/2 inches (240mm) long and 1-3/4 inches (45mm) wide at the tip. Professional tool for removing excess concrete, roughing up concrete prior to a surface treatment, or shaping concrete, masonry and natural stone. 16-tooth square head, optimized cutting edge geometry for best removal rate, fully hardened steel body increases durability and prevents breakage. Easy operation, when use for leveling concrete walls or floors, or leveling a high spot, or producing an exterior finish, is less dustier than grinding the concrete or slab with a grinder and cup wheel.

 

1316 x 14 Long Relton MX-13-14 Single Cutter Hammer Bits SDS-Max Shank #ad

13/16″ x 14″ Long Relton MX-13-14 Single Cutter Hammer Bits SDS-Max Shank

13/16″ x 14″ Long Relton MX-13-14 Single Cutter Hammer Bits SDS-Max Shank #ad - Point diameter 13/16″ overall length 14″ drilling depth 8″ minimum order 1 each. Unique double flute design removes dust quickly. Carbide tip designed for rotary percussion action high grade alloy tool steel body, heat treated for exceptional strength.

 

Hilti TE-YX Hammer Drill Bit with SDS-Max Shanks - 34 x 13 - 293472 #ad

Hilti TE-YX Hammer Drill Bit with SDS-Max Shanks – 3/4″ x 13″ – 293472

Hilti TE-YX Hammer Drill Bit with SDS-Max Shanks – 3/4″ x 13″ – 293472 #ad - 3)standard sds-max shank is compatible with bosch, dewalt, milwaukee, hitachi, makita, hilti and other brand sds-max system rotary hammers and demolition hammers. 5) the drilling with this adapter is precise and effortless this adapter is worked best with sds-plus drill bits with diameter smaller than 5/8″ (16mm). 4) sds-plus quick change chuck can hold all sizes of sds-plus bits stably with easy plug in and take out. 2) industrial grade professional adapter made of high quality steel, ultra durable construction meets the demands of frequent use, packed in a handy white plastic tube that is durable and convenient to store and carry. 1) allows sds-plus bits to be used in a sds-max tool with this adapter you only need one sds-max hammer to use all sizes of sds-max drill bits as well as sds-plus drill bits without having to purchase another sds-plus hammer tool.

 

Superior Steel SC8917W 2 Inch Wide SDS Max Scaling Chisel 16 Inch Long Shank #ad

Superior Steel SC8917W 2 Inch Wide SDS Max Scaling Chisel 16 Inch Long Shank

Superior Steel SC8917W 2 Inch Wide SDS Max Scaling Chisel 16 Inch Long Shank #ad - Scaling chisel bit with two 60° cutting angles to clean concrete, scale, and rust. Demolition hammer steel is made from hardened steel to reduce breakage and provide long life. For light chipping and chiseling of tile, mortar, glazing compounds, and other masonry products. Fully hardened steel body delivers increases life and durability. Also cuts troughs and some asphalt, key features forged from alloy steel to give a harder blade with great resilience and durability | correctly hardened and tempered so blade will not shatter when struck hard | heat treated high carbon steel for necessary hardness and durability | for masonry and concrete demolition | hardened steel design stands up to the toughest daily use for concrete removal, hard surface break up and chiseling | fits most sds-max hammers, and sds-max driver hammers. Designed for use with most sds-max hammers. Superior steel sc8917w 2 inch wide sds max scaling chisel 16 inch long.

 

SDS Max to SDS plus Shank Adaptor Power Tools Accessories #ad

SDS Max to SDS plus Shank Adaptor Power Tools Accessories

SDS Max to SDS plus Shank Adaptor Power Tools Accessories #ad - Fits hitache , bosch, and makita etc. Sds max chuck cone design on head and shank, like drill press’s chuck, more tightly when rotating, anti-broken on neck converts sds max shank to sds+plus shank overall length 7-3/4″(197mm) net weight 1lb and 6oz.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.