Top 18 Best Steel Band Saws

 

Magnate M925C316R10 Carbon Tool Steel Bandsaw Blade 92-12 Long - 316 Width 10 Raker Tooth

Magnate M92.5C316R10 Carbon Tool Steel Bandsaw Blade, 92-1/2″ Long – 3/16″ Width; 10 Raker Tooth

Magnate M92.5C316R10 Carbon Tool Steel Bandsaw Blade, 92-1/2″ Long – 3/16″ Width; 10 Raker Tooth - Steel). E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92-1/2 inch ( 7 ft. E. 8-1/2 inch, 7′ 8-1/2″ ) bandsaw blades suit the following models jet j-8203k powerline mark 1 shopcraft 28-283f mit 5125 american industrial amt 4113 enco 505-1372 (models 8201, 8203, 8201vs and 8203vs), 199-9013, 199-9011, 199-9001 dayton 3z981 central machinery 32206-ocea, 32208-ocea, 5687-ocea, 2146-3bmf, 00580-ocea nu-mark 14″ united 14″ wilton tradesman 8201, 8203, 8201vs, 8203vs grizzly g0580x g0555x (92-1/2″ to 93-1/2″) 14″ ohio fo. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It can cut all types of woods and is especially ideal for soft woods i. Pine, polar, fir and spruce. The picture depicted represents one blade the pricing is for one blade/package. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Carbon tool steel bandsaw blades are made from high end carbon steel. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It is also used for cutting plastics, aluminum, metals, and mild steel.

 

Magnate M72C12R24 Carbon Tool Steel Bandsaw Blade 72 Long - 12 Width 24 Raker Tooth

Magnate M72C12R24 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/2″ Width; 24 Raker Tooth

Magnate M72C12R24 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/2″ Width; 24 Raker Tooth - Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Carbon tool steel bandsaw blades are made from high end carbon steel. The picture depicted represents one blade the pricing is for one blade/package. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel). 2, if the owner’s manual is not available, refer to previous invoices. It is also used for cutting plastics, aluminum, metals, and mild steel. E. Pine, polar, fir and spruce. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. , 6′ ) bandsaw blades suit the following models shopsmith 10 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72 inch ( 6 ft. E. This method will provide the most possible. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. It can cut all types of woods and is especially ideal for soft woods i.

 

Magnate M72C14R10 Carbon Tool Steel Bandsaw Blade 72 Long - 14 Width 10 Raker Tooth

Magnate M72C14R10 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/4″ Width; 10 Raker Tooth

Magnate M72C14R10 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/4″ Width; 10 Raker Tooth - Carbon tool steel bandsaw blades are made from high end carbon steel. Pine, polar, fir and spruce. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 2, if the owner’s manual is not available, refer to previous invoices. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. This method will provide the most possible. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Steel). Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72 inch ( 6 ft. E. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. E. It can cut all types of woods and is especially ideal for soft woods i. It is also used for cutting plastics, aluminum, metals, and mild steel. The picture depicted represents one blade the pricing is for one blade/package. , 6′ ) bandsaw blades suit the following models shopsmith 10 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness.

 

Magnate M137C18R18 Carbon Tool Steel Bandsaw Blade 137 Long - 18 Width 18 Raker Tooth

Magnate M137C18R18 Carbon Tool Steel Bandsaw Blade, 137″ Long – 1/8″ Width; 18 Raker Tooth

Magnate M137C18R18 Carbon Tool Steel Bandsaw Blade, 137″ Long – 1/8″ Width; 18 Raker Tooth - Blade has 4-teeth per inch. Replacement blade for hitachi cb75f 14-1/2inch resaw band saw. For wood or metal cutting 1/2″ width 6 hook tooth 0025″ thickness 0049″ kerf. For wood or metal cutting 3/8″ width 18 raker tooth 0025″ thickness 0049″ kerf. Comes with a 30-day limited warranty. For wood or metal cutting 1/8″ width 18 raker tooth 0025″ thickness 0047″ kerf. For wood or metal cutting 3/8″ width 8 raker tooth 0025″ thickness 0049″ kerf. For wood or metal cutting 1/4″ width 24 raker tooth 0025″ thickness.

 

Magnate M92C14R10 Carbon Tool Steel Bandsaw Blade 92 Long - 14 Width 10 Raker Tooth

Magnate M92C14R10 Carbon Tool Steel Bandsaw Blade, 92″ Long – 1/4″ Width; 10 Raker Tooth

Magnate M92C14R10 Carbon Tool Steel Bandsaw Blade, 92″ Long – 1/4″ Width; 10 Raker Tooth - This method will provide the mos. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Steel). Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Carbon tool steel bandsaw blades are made from high end carbon steel. The picture depicted represents one blade the pricing is for one blade/package. Pine, polar, fir and spruce. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92 inch ( 7 ft. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. It is also used for cutting plastics, aluminum, metals, and mild steel. E. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 8 inch, 7′ 8″ ) bandsaw blades suit the following models enco 199-9001 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. It can cut all types of woods and is especially ideal for soft woods i. 2, if the owner’s manual is not available, refer to previous invoices.

 

Magnate M725C14H6 Carbon Tool Steel Bandsaw Blade 72-12 Long - 14 Width 6 Hook Tooth

Magnate M72.5C14H6 Carbon Tool Steel Bandsaw Blade, 72-1/2″ Long – 1/4″ Width; 6 Hook Tooth

Magnate M72.5C14H6 Carbon Tool Steel Bandsaw Blade, 72-1/2″ Long – 1/4″ Width; 6 Hook Tooth - Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72-1/2 inch ( 6 ft. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. 1/2 inch, 6′ 1/2″ ) bandsaw blades suit the following models delta 28-195, bs150ls skil hd 3640 ryobi bs50n dremel 1120 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. It is also used for cutting plastics, aluminum, metals, and mild steel. It can cut all types of woods and is especially ideal for soft woods i. Pine, polar, fir and spruce. 2, if the owner’s manual is not available, refer to previous invoices. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. The picture depicted represents one blade the pricing is for one blade/package. Carbon tool steel bandsaw blades are made from high end carbon steel. 3, cut your old bandsaw blade so that it lies flat on a level surface,. Steel). Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.

 

Magnate M895C14H6 Carbon Tool Steel Bandsaw Blade 89-12 Long - 14 Width 6 Hook Tooth

Magnate M89.5C14H6 Carbon Tool Steel Bandsaw Blade, 89-1/2″ Long – 1/4″ Width; 6 Hook Tooth

Magnate M89.5C14H6 Carbon Tool Steel Bandsaw Blade, 89-1/2″ Long – 1/4″ Width; 6 Hook Tooth - It can cut all types of woods and is especially ideal for soft woods i. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. This method wi. E. Carbon tool steel bandsaw blades are made from high end carbon steel. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Steel). Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Pine, polar, fir and spruce. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 89-1/2 inch ( 7 ft. E. 2, if the owner’s manual is not available, refer to previous invoices. It is also used for cutting plastics, aluminum, metals, and mild steel. The picture depicted represents one blade the pricing is for one blade/package. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. 5-1/2 inch, 7′ 5-1/2″ ) bandsaw blades suit the following models sears craftsman 12″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness.

 

Magnate M92C38H3 Carbon Tool Steel Bandsaw Blade 92 Long - 38 Width 3 Hook Tooth

Magnate M92C38H3 Carbon Tool Steel Bandsaw Blade, 92″ Long – 3/8″ Width; 3 Hook Tooth

Magnate M92C38H3 Carbon Tool Steel Bandsaw Blade, 92″ Long – 3/8″ Width; 3 Hook Tooth - 2, if the owner’s manual is not available, refer to previous invoices. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. The picture depicted represents one blade the pricing is for one blade/package. E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92 inch ( 7 ft. Steel). Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 8 inch, 7′ 8″ ) bandsaw blades suit the following models enco 199-9001 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Pine, polar, fir and spruce. It can cut all types of woods and is especially ideal for soft woods i. It is also used for cutting plastics, aluminum, metals, and mild steel. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. This method will provide the mos. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.

 

Magnate M895C12H4 Carbon Tool Steel Bandsaw Blade 89-12 Long - 12 Width 4 Hook Tooth

Magnate M89.5C12H4 Carbon Tool Steel Bandsaw Blade, 89-1/2″ Long – 1/2″ Width; 4 Hook Tooth

Magnate M89.5C12H4 Carbon Tool Steel Bandsaw Blade, 89-1/2″ Long – 1/2″ Width; 4 Hook Tooth - E. It is also used for cutting plastics, aluminum, metals, and mild steel. 2, if the owner’s manual is not available, refer to previous invoices. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 89-1/2 inch ( 7 ft. This method wi. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It can cut all types of woods and is especially ideal for soft woods i. Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. 5-1/2 inch, 7′ 5-1/2″ ) bandsaw blades suit the following models sears craftsman 12″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Pine, polar, fir and spruce. The picture depicted represents one blade the pricing is for one blade/package. Steel). E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results.

 

Magnate M80C12R24 Carbon Tool Steel Bandsaw Blade 80 Long - 12 Width 24 Raker Tooth

Magnate M80C12R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/2″ Width; 24 Raker Tooth

Magnate M80C12R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/2″ Width; 24 Raker Tooth - It can cut all types of woods and is especially ideal for soft woods i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Pine, polar, fir and spruce. E. It is also used for cutting plastics, aluminum, metals, and mild steel. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft. 2, if the owner’s manual is not available, refer to previous invoices. The picture depicted represents one blade the pricing is for one blade/package. Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Steel). Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc.

 

Magnate M9975C38H6 Carbon Tool Steel Bandsaw Blade 99-34 Long - 38 Width 6 Hook Tooth

Magnate M99.75C38H6 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 3/8″ Width; 6 Hook Tooth

Magnate M99.75C38H6 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 3/8″ Width; 6 Hook Tooth - For wood or metal cutting 3/8″ width 8 raker tooth 0025″ thickness 0049″ kerf. For wood or metal cutting 1/8″ width 18 raker tooth 0025″ thickness 0047″ kerf. For wood or metal cutting 1/4″ width 14 raker tooth 0025″ thickness 0047″ kerf. Blade has 4-teeth per inch. For wood or metal cutting 3/8″ width 24 raker tooth 0025″ thickness 0049″ kerf. For wood or metal cutting 1/4″ width 24 raker tooth 0025″ thickness. For wood or metal cutting 3/8″ width 18 raker tooth 0025″ thickness 0049″ kerf. For wood or metal cutting 3/8″ width 6 hook tooth 0025″ thickness 0049″ kerf.

 

Magnate M133C114H2 Carbon Tool Steel Bandsaw Blade 133 Long - 1-14 Width 2 Hook Tooth

Magnate M133C114H2 Carbon Tool Steel Bandsaw Blade, 133″ Long – 1-1/4″ Width; 2 Hook Tooth

Magnate M133C114H2 Carbon Tool Steel Bandsaw Blade, 133″ Long – 1-1/4″ Width; 2 Hook Tooth - Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. Pine, polar, fir and spruce. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel). 3, cut your old bandsaw blade so that it lies flat. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. The picture depicted represents one blade the pricing is for one blade/package. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 1 inch, 11′ 1″ ) bandsaw blades suit the following models jet jwbs-18 18″ dayton 2ac29 18″ rikon 10-336 grizzly g8146z (133-3/4″ to 136-1/4″) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 133 inch ( 11 ft. It can cut all types of woods and is especially ideal for soft woods i. It is also used for cutting plastics, aluminum, metals, and mild steel. 2, if the owner’s manual is not available, refer to previous invoices. E. Carbon tool steel bandsaw blades are made from high end carbon steel.

 

Magnate M62C38R24 Carbon Tool Steel Bandsaw Blade 62 Long - 38 Width 24 Raker Tooth

Magnate M62C38R24 Carbon Tool Steel Bandsaw Blade, 62″ Long – 3/8″ Width; 24 Raker Tooth

Magnate M62C38R24 Carbon Tool Steel Bandsaw Blade, 62″ Long – 3/8″ Width; 24 Raker Tooth - Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 2 inch, 5′ 2″ ) bandsaw blades suit the following models skil 3104 sears craftsman 103-24556, 2442 9ht2442n central machinery d0686-4bmf, 01629-icea mark 1 rexon bs-12 alltrade 1996bbr powerline dbs-12 jet dbs-12 black & decker (some models) grizzly g8976 12″ walker-turner 10″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the. It can cut all types of woods and is especially ideal for soft woods i. Carbon tool steel bandsaw blades are made from high end carbon steel. E. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Pine, polar, fir and spruce. E. Steel). The picture depicted represents one blade the pricing is for one blade/package. It is also used for cutting plastics, aluminum, metals, and mild steel. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 62 inch ( 5 ft. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced.

 

Magnate M9975C14R14 Carbon Tool Steel Bandsaw Blade 99-34 Long - 14 Width 14 Raker Tooth

Magnate M99.75C14R14 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/4″ Width; 14 Raker Tooth

Magnate M99.75C14R14 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/4″ Width; 14 Raker Tooth - For wood or metal cutting 1/8″ width 18 raker tooth 0025″ thickness 0047″ kerf. Blade has 4-teeth per inch. For wood or metal cutting 1/4″ width 24 raker tooth 0025″ thickness. For wood or metal cutting 3/8″ width 18 raker tooth 0025″ thickness 0049″ kerf. For wood or metal cutting 3/8″ width 24 raker tooth 0025″ thickness 0049″ kerf. For wood or metal cutting 3/8″ width 8 raker tooth 0025″ thickness 0049″ kerf. Comes with a 30-day limited warranty. For wood or metal cutting 1/4″ width 14 raker tooth 0025″ thickness 0047″ kerf.

 

Magnate M705C38R18 Carbon Tool Steel Bandsaw Blade 70-12 Long - 38 Width 18 Raker Tooth

Magnate M70.5C38R18 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 3/8″ Width; 18 Raker Tooth

Magnate M70.5C38R18 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 3/8″ Width; 18 Raker Tooth - For wood or metal cutting 3/8″ width 18 raker tooth 0025″ thickness 0049″ kerf. For wood or metal cutting 1/2″ width 6 hook tooth 0025″ thickness 0049″ kerf. For wood or metal cutting 1/4″ width 18 raker tooth 0025″ thickness 0047″ kerf. Blade has 4-teeth per inch. Replacement blade for hitachi cb75f 14-1/2inch resaw band saw. Replacement blade for hitachi model cb75f 14-1/2-inch resaw band saw. Comes with a 30-day limited warranty. For wood or metal cutting 1/4″ width 24 raker tooth 0025″ thickness.

 

Magnate M5275C316R14 Carbon Tool Steel Bandsaw Blade 52-34 Long - 316 Width 14 Raker Tooth

Magnate M52.75C316R14 Carbon Tool Steel Bandsaw Blade, 52-3/4″ Long – 3/16″ Width; 14 Raker Tooth

Magnate M52.75C316R14 Carbon Tool Steel Bandsaw Blade, 52-3/4″ Long – 3/16″ Width; 14 Raker Tooth - Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It is also used for cutting plastics, aluminum, metals, and mild steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. It can cut all types of woods and is especially ideal for soft woods i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. 2, if the owner’s manual is not available, refer to previous invoices. This method will provide the most possibl. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, 52-3/4 inch ( 4 ft. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. The picture depicted represents one blade the pricing is for one blade/package. 4-3/4 inch, 4′ 4-3/4″ ) bandsaw blades suit the following models black & decker 74-4800, 9442 three wheelers and sears 10″ delta 28160, 28180 ohio forge 59613 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Pine, polar, fir and spruce. Carbon tool steel bandsaw blades are made from high end carbon steel. Steel).

 

Magnate M1315C14H6 Carbon Tool Steel Bandsaw Blade 131-12 Long - 14 Width 6 Hook Tooth

Magnate M131.5C14H6 Carbon Tool Steel Bandsaw Blade, 131-1/2″ Long – 1/4″ Width; 6 Hook Tooth

Magnate M131.5C14H6 Carbon Tool Steel Bandsaw Blade, 131-1/2″ Long – 1/4″ Width; 6 Hook Tooth - E. 3, cut your old bandsaw blade so t. 11-1/2 inch, 10′ 11-1/2″ ) bandsaw blades suit the following modelsgrizzly g0513 g0513x2 g0513b g0640x 17″ general international 90-320 m1 (metalcutting) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 131-1/2 inch ( 10 ft. The picture depicted represents one blade the pricing is for one blade/package. Carbon tool steel bandsaw blades are made from high end carbon steel. Pine, polar, fir and spruce. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It can cut all types of woods and is especially ideal for soft woods i. E. 2, if the owner’s manual is not available, refer to previous invoices. Steel). Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It is also used for cutting plastics, aluminum, metals, and mild steel.

 

Magnate M5925C38R24 Carbon Tool Steel Bandsaw Blade 59-14 Long - 38 Width 24 Raker Tooth

Magnate M59.25C38R24 Carbon Tool Steel Bandsaw Blade, 59-1/4″ Long – 3/8″ Width; 24 Raker Tooth

Magnate M59.25C38R24 Carbon Tool Steel Bandsaw Blade, 59-1/4″ Long – 3/8″ Width; 24 Raker Tooth - E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 59-1/4 inch ( 4 ft. It can cut all types of woods and is especially ideal for soft woods i. E. 2, if the owner’s manual is not available,. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 11-1/4 inch, 4′ 11-1/4″ ) bandsaw blades suit the following models ryobi bs903 (59-1/4″ to 59-1/2 ) black & decker, 9411 sears craftsman skil 9″, 3381-01 tradesman 9″pro-tech 9″ collins 9″ toolkraft 4500, 4502 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Steel). Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Pine, polar, fir and spruce. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. It is also used for cutting plastics, aluminum, metals, and mild steel. Carbon tool steel bandsaw blades are made from high end carbon steel. The picture depicted represents one blade the pricing is for one blade/package.