Top 18 Toolmakers Vises for 2020

 

Palmgren Toolmakers Vise 4 #ad

Palmgren Toolmakers Vise, 4″

Palmgren Toolmakers Vise, 4″ #ad - Ground “v” way. Clamping slots are provided and jaws are easily replaced. All surfaces are hardened (52-58 hrc) and precision ground. Square and parallel to an accuracy of +/- 0002″.

 

TTC 466-000TM 2-38 Jaw Width Precision Toolmakers Vise #ad

TTC 466-000TM 2-3/8″ Jaw Width Precision Toolmakers Vise

TTC 466-000TM 2-3/8″ Jaw Width Precision Toolmakers Vise #ad - Ground “v” way. Overall height 1-3/4″. Base and front jaw are of one piece all steel construction. Hardened and ground dovetail slide eliminates “lift” and ensures consistent accuracy. Overall length 6-1/4″.

 

HHIP 3900-2012 2 Ultra Precision Toolmakers Vise #ad

HHIP 3900-2012 2″ Ultra Precision Toolmaker’s Vise

HHIP 3900-2012 2″ Ultra Precision Toolmaker’s Vise #ad - Hardened and precision ground, hrc5560 degree. Jaw width is 50mm. The “no-rise” jaw construction exerts a continual downward pressure to the jaw, eliminating tilting & lifting. Jaw can be opened and closed without unbolting the vise from the work surface. Tolerance is within 00012″(parallelism) and 0002″ (squareness).

 

SHARS 3 X 4 Precision Toolmaker Grinding Ground Steel Vise 0002 New 202-1124 M #ad

SHARS 3 X 4″ Precision Toolmaker Grinding Ground Steel Vise .0002″ New 202-1124 M

SHARS 3 X 4″ Precision Toolmaker Grinding Ground Steel Vise .0002″ New 202-1124 M #ad - High precision one-piece steel construction. Square and parallel to within 0002″. Jaw opening 4″ jaw width 3″ jaw depth 1-3/8″ overall length 7-9/32″ height 2-3/4″, width 3″. Body and jaws hardened to rc 58-62. “no-rise” jaw construction exerts continual downward force, avoiding the raise common to most vises.

 

Precision 2-38 Toolmaker Vise Machinist Tookmaking Clamp Vice Replacement Jaw #ad

Precision 2-3/8” Toolmaker Vise Machinist Tookmaking Clamp Vice Replacement Jaw

Precision 2-3/8” Toolmaker Vise Machinist Tookmaking Clamp Vice Replacement Jaw #ad - 2-3/8” toolmaker vise jaw width 2-3/8” jaw depth 1-1/4” jaw open (max opening) 3-3/8” has ground “v” way clamping slot and 3/8” hole in base detachable replacement jaws unit overall dimension (fully open) 2-3/8”l x 13”w x 2-1/2”h .

 

Precision Toolmakers Vise 2-38 Jaw Width and 3-38 Jaw Opening #ad

Precision Toolmakers Vise 2-3/8″ Jaw Width and 3-3/8 Jaw Opening

Precision Toolmakers Vise 2-3/8″ Jaw Width and 3-3/8 Jaw Opening #ad - Has v groove clamping slot and 3/8” hole in base detachable replacement jaws. Toolmaker vise. Jaw width 2-3/8” jaw depth 1-1/4” jaw opening 3-3/8”. Quantity 1 set unit weight 7-3/4 lbs. Unit dimension 2-3/8” x 7-3/4” x 2-1/2”.

 

Precision Toolmakers Vise 00002 #ad

Precision Toolmakers Vise 0.0002

Precision Toolmakers Vise 0.0002 #ad - This precision toolmakers vise is a high carbon steel with jaw width of 5″, jaw depth of 2″ and jaw opening of 6-3/8″ and vise length of 12″. Hardness is in 58-62 hcr and tolerance is within 0. 005mm/0. 0002″ of parallelism, flatness and squareness.

 

PROLINEMAX 1 Precision Grinding Screwless Mini Insert Vise Toolmaker Steel 0002 #ad

PROLINEMAX 1” Precision Grinding Screwless Mini Insert Vise Toolmaker Steel .0002”

PROLINEMAX 1” Precision Grinding Screwless Mini Insert Vise Toolmaker Steel .0002” #ad - 0002″ overall dimension 2-1/2”l x 1”w x 1-1/8”h weight 8 ounce. 1” mini insert toolmaker vise jaw width 1″ jaw opening 13/16″ maximum jaw depth 3/8″ vise length 2-1/2″ vise height 1-1/8″ base hardened and ground squareness and parallelism to within.

 

SHARS 4-78 X 4 Best Toolmaker Grinding Ground Steel Vise 0002 New 202-1123 R #ad

SHARS 4-7/8 X 4″ Best Toolmaker Grinding Ground Steel Vise .0002″ New 202-1123 R

SHARS 4-7/8 X 4″ Best Toolmaker Grinding Ground Steel Vise .0002″ New 202-1123 R #ad - “No-rise” jaw construction exerts continual downward force, avoiding the raise common to most vises. High precision one-piece steel construction. Square and parallel to within 0002″. Body and jaws hardened to rc 58-62. Jaw opening 4-7/8″ jaw depth 1-3/4″ overall length 9-29/64″ height 3-35/64″, width 4″.

 

SHARS 2 X 3-14 Precision Toolmakers Vise New 202-1210 P #ad

SHARS 2 X 3-1/4″ Precision Toolmakers Vise New 202-1210 P

SHARS 2 X 3-1/4″ Precision Toolmakers Vise New 202-1210 P #ad - “No-rise” jaw construction exerts continual downward force, avoiding the raise common to most vises. Jaw opening 3-1/4″ jaw depth 1″ overall length 5-7/8″ height 2″, width 2″. High precision one-piece steel construction. Square and parallel to within 0002″. Body and jaws hardened to rc 58-62.

 

Shars 2-12 x 3-38 Precision Toolmakers Grinding Ground Steel Vise 0002 New 202-1110 L #ad

Shars 2-1/2″ x 3-3/8″ Precision Toolmakers Grinding Ground Steel Vise .0002″ New 202-1110 L

Shars 2-1/2″ x 3-3/8″ Precision Toolmakers Grinding Ground Steel Vise .0002″ New 202-1110 L #ad - Hardened and ground rc 58-62. One-piece body construction. Square and parallel within. 0002″. V-groove allows for holding of square and round parts, vertically and horizontally. Precision ground on the front end, rear end, both sides, top and bottom.

 

Precision Toolmakers Vise 2-12 for Holding of Square and Round Parts Vertically and Horizontally #ad

Precision Toolmakers Vise 2-1/2″ for Holding of Square and Round Parts, Vertically and Horizontally

Precision Toolmakers Vise 2-1/2″ for Holding of Square and Round Parts, Vertically and Horizontally #ad - 0002″ (tolerance on handbook is metric) clamping slots are provided and jaws are easily replaced. V-groove allows for holding of square and round parts, vertically and horizontally square and parallel within.

 

Precision 2-38 Toolmaker Vise Machinist Tookmaking Clamp Vice Replacement Jaw #ad

Precision 2-3/8” Toolmaker Vise Machinist Tookmaking Clamp Vice Replacement Jaw

Precision 2-3/8” Toolmaker Vise Machinist Tookmaking Clamp Vice Replacement Jaw #ad - Hardened v-groove jaws hold round shapes in either a vertical or a horizontal position. Jaws and parts are interchangeable with wilton. Body and slide are made of selected fine grain cast iron. Slip handle allows for easy turning and added leverage. Precision 2-3/8” toolmaker vise machinist tookmaking clamp vice replacement jaw.

 

Palmgren Toolmakers Vise 4 x 4-5964 x 1-34 In - 13164 #ad

Palmgren Toolmakers Vise, 4 x 4-59/64 x 1-3/4 In – 13164

Palmgren Toolmakers Vise, 4 x 4-59/64 x 1-3/4 In – 13164 #ad - ) 4-59/64, throat depth (in. ), 4-3/4 max. 00012″, squareness 0. 0060″, jaw plate hardened and ground, bed/base hardened and ground, features one piece body construction hardened and ground, parallelism 0. ) 1-3/4, overall length (in. ) 10, overall height (in. ) 4, jaw opening (in. 0060″ jaw plate, hardened and ground bed/base, hardened and ground features, one piece body construction hardened and ground, parallelismwarning california residents this product can expose you to chemicals including styrene, which is known to the state of california to cause cancer and birth defects or other reproductive harm. ) 4-3/4, max. Angle vise, base stationary, jaw width (in. ), 10 overall height (in. 0002″, vise mounted onto precison hinged bottom plate, vise angles up to 45 degreesfeatures, overall length (in. Travel, 4-59/64 jaw deflection, 0. Travel 4-59/64, jaw deflection 0.

 

MH GLOBAL 2 x 3-18 inch High Precision Toolmakers Vise 0002 inch Square and Parallel #ad

MH GLOBAL 2 x 3-1/8 inch High Precision Toolmakers Vise .0002 inch Square and Parallel

MH GLOBAL 2 x 3-1/8 inch High Precision Toolmakers Vise .0002 inch Square and Parallel #ad - Square and parallel to within 0002 inch. 2 x 3-1/8 inch high precision toolmakers vise 0002 inch square and parallel. Jaw width (inch) 2 jaw opening (inch) 3-1/8 jaw depth (inch) 1. Vise dimension 6 in l x 2 in w x 2 in h rough estimation plastic case dimension 10 in l x 4-1/2 in w x 3-1/2 in h rough estimation unit weight 355 pounds rough estimation shipping weight 5 pounds rough estimation. Vise category toolmakers vise high precision one-piece steel construction ground flat supplied with plastic case when purchase.

 

Fowler 52-466-000 Steel Toolmaker Vise 125 Wx 2375 H x 4375 L #ad

Fowler 52-466-000 Steel Toolmaker Vise, 1.25″ Wx 2.375″ H x 4.375″ L

Fowler 52-466-000 Steel Toolmaker Vise, 1.25″ Wx 2.375″ H x 4.375″ L #ad - Trust your best work with these quality milling vises. Made from the highest quality ductile iron 80000 psi for minimum bending. Premium quality swiveling milling vises features perfectly aligned precision gowned jaws. Designed so horizontal force pushed the jaws downward, keeping your piece in the right spot. 1 year warranty offered by fowler high precision.

 

Precision Toolmakers Vise 00002 #ad

Precision Toolmakers Vise 0.0002

Precision Toolmakers Vise 0.0002 #ad - This precision toolmakers vise has jaw width of 3-1/2″, jaw depth of 1-5/8″, jaw opening of 5″, vise length of 10″, hardness of 58-62 hcr, tolerance of within 0. 0002″ of parallelism, flatness and squareness. It comes in high carbon steel. 005mm/0.

 

HHIP 3900-0067 2 Inch Toolmakers Vise #ad

HHIP 3900-0067 2 Inch Toolmaker’s Vise

HHIP 3900-0067 2 Inch Toolmaker’s Vise #ad - Jaw width 2″ jaw depth 100″. Clamping slots are provided and jaws are easily replaced. Jaw opening 25″. All surfaces are hardened and precision ground square and parallel to accuracy of ±0002″.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.