Top 19 Best Miter Clamps

 

Woodtek 815268 Clamps And Vises Specialty Vises Picture Frame Miter Vise

Woodtek 815268, Clamps And Vises, Specialty Vises, Picture Frame Miter Vise

Woodtek 815268, Clamps And Vises, Specialty Vises, Picture Frame Miter Vise - Woodtek 815268, clamps and vises, specialty vises, picture frame miter vise. Use to clamp mitered corners. Replacement clamps for big horn 19680 25-piece miter clamp set (sold separately).

 

Quint Graphics Miter Clamps Set of 4

Quint Graphics Miter Clamps, Set of 4

Quint Graphics Miter Clamps, Set of 4 - Packaged 4 clamps in a set. The sharp points pierce the wood without cutting wood fibers so it’s easy to clean up the marks. . These little spring miter clamps are perfect for keeping the pressure on while gluing miters, and when the glue is dry the tips will still be tight. When you see the superior results, you’ll never stop using these clamps. Miter clamps are the only way you can pressurize compound miters and these clamps will hold any compound miter as well as all awkward shapes and profiles. When miters are glued together they tend to open at the tips because end grain has been cut on the diagonal.

 

Ryobi TS1553DXL MiterSaw Miter Clamp Assembly2 Pk  089100302052-2pk by Ryobi

Ryobi TS1553DXL MiterSaw Miter Clamp Assembly(2 Pk) # 089100302052-2pk by Ryobi

Ryobi TS1553DXL MiterSaw Miter Clamp Assembly(2 Pk) # 089100302052-2pk by Ryobi - Replacement clamps for big horn 19680 25-piece miter clamp set (sold separately). Ryobi ts1553dxl mitersaw miter clamp assembly(2 pk) # 089100302052-2pk. Use to clamp mitered corners.

 

Collins Miter Spring Pliers and 4 Miter Clamps Kit by Collins

Collins Miter Spring Pliers and 4 Miter Clamps Kit by Collins

Collins Miter Spring Pliers and 4 Miter Clamps Kit by Collins - Clamps are of heavy duty metal construction with coated plastic handleseasily apply and remove miter clampsopens to almost two inches and open to almost two inchesclamps sharp points pierce the wood without cutting wood fibers and keep the pressure onclamps hold any compound miter as well as all awkward shapes and profilesmade in usa.

 

Ulmia B Size Miter Clamp Ring 10 Pack Model 170-b Tools Hardware store

Ulmia B Size Miter Clamp Ring 10 Pack, Model: 170-b, Tools & Hardware store

Ulmia B Size Miter Clamp Ring 10 Pack, Model: 170-b, Tools & Hardware store - The application tool allows for precise alignment and clamping of all sizes of miter joints. Miter clamp pliers (sold separately) are required to apply and remove these rings. B-size rings are the second smallest size in the a-f range. The clamp rings are available in six sizes a-f as well as a pinch clamp for smaller work. Search ulmia clamp to see all of the different sizes. Useful for clamping and glueing crown moulding, base trim, chair rail, picture frames, cabinets, etc. Distance between points is 3/4 inch. For use with mouldings with a width of 5/8 to 1 inch.

 

Miter Clip 003027 Corner Clamp for Tight Glue Joints Yellow

Miter Clip 003027 Corner Clamp for Tight Glue Joints, Yellow

Miter Clip 003027 Corner Clamp for Tight Glue Joints, Yellow - The metal spurs hold the wood firmly and allow the clamp to be rotated, while leaving minimal marks. Made in the usa. Clamping miters couldn’t get much easier than with the miter clip. Once clamped, you can also rotate the clamp handle up and out of the way, providing access so you can nail the miter and move on to the next corner. Just position the miter clip and squeeze-the reverse cam mechanism applies pressure and holds the miter clamp firmly shut, while the notch keeps the tips of the miters neatly aligned.

 

Big Horn 19687 Miter Clamps 2-12-Inch x 3-38-Inch by Big Horn

Big Horn 19687 Miter Clamps, 2-1/2-Inch x 3-3/8-Inch, by Big Horn

Big Horn 19687 Miter Clamps, 2-1/2-Inch x 3-3/8-Inch, by Big Horn - Use to clamp mitered corners. Big horn 19687 miter clamps, 2-1/2-inch x 3-3/8-inch,. Replacement clamps for big horn 19680 25-piece miter clamp set (sold separately).

 

Ulmia Miter Clamp Set

Ulmia Miter Clamp Set

Ulmia Miter Clamp Set - Step up to quality this set by ulmia is the original german version of an incredibly useful type of clamp that has been cheaply-and badly-copied by lesser suppliers. The clamp puts just enough pressure on your miters to create a perfect glue joint that won’t fail. Get the best quality tool for best quality results. Works great for mitered joints such as casing, crown moldings, picture frames as well as holding parts together for assembly. Comes in a nicely fitted plastic carrier to keep everything organized. A woodworker’s best friend, a tool that should be in every trim carpenter or cabinet maker’s toolbox. You’ll be impressed how easily you can clamp and align many types of joints. Set includes 1 pair pliers, 8 rings each size a to f, total of 48 rings. Spring steel rings are available in 6 different sizes, applied with the special pliers.

 

Ulmia B Size Miter Clamp Ring 10 Pack

Ulmia “B” Size Miter Clamp Ring 10 Pack

Ulmia “B” Size Miter Clamp Ring 10 Pack - Miter clamp pliers (sold separately) are required to apply and remove these rings. Useful for clamping and glueing crown moulding, base trim, chair rail, picture frames, cabinets, etc. For use with mouldings with a width of 5/8 to 1 inch. “B”-size rings are the second smallest size in the a-f range. The clamp rings are available in six sizes a-f as well as a “pinch clamp” for smaller work. Search “ulmia clamp” to see all of the different sizes. The application tool allows for precise alignment and clamping of all sizes of miter joints. Distance between points is 3/4 inch.

 

Adjustable Clamp 9170 Pony Rapid Acting Miter Clamp by Adjustable Clamp

Adjustable Clamp 9170 Pony Rapid Acting Miter Clamp by Adjustable Clamp

Adjustable Clamp 9170 Pony Rapid Acting Miter Clamp by Adjustable Clamp - Clamp will miter or butt joints and leaves joint fully exposed for miter correction, doweling, gluing or nailingquick release for fast adjustments2-3/4 material capacity, 2-3/4 jaw width, 1 heightdie cast frame for strengthlarge comfortable handle and acme threads for strength.

 

Ulmia Miter Clamp Set by Ulmia

Ulmia Miter Clamp Set by Ulmia

Ulmia Miter Clamp Set by Ulmia - Made in germanya time saver for any mitered jointplier tool allows for easy and precise setting of ringsset contains 8 each of 6 different size clamping ringsspring steel rings will never lost their shape.

 

Ulmia Miter Clamp Set with Wooden Box

Ulmia Miter Clamp Set with Wooden Box

Ulmia Miter Clamp Set with Wooden Box - Set contains 8 each of 6 different size clamping rings. Spring steel rings will never lost their shape. Wooden box with plastic liner keeps all parts organized. Made in germany, a time saver for any mitered joint. Plier tool allows for easy and precise setting of rings.

 

Adjustable Clamp 9170 Pony Rapid Acting Miter Clamp

Adjustable Clamp 9170 Pony Rapid Acting Miter Clamp

Adjustable Clamp 9170 Pony Rapid Acting Miter Clamp - 2-3/4″ material capacity, 2-3/4″ jaw width, 1″ height. Clamp will miter or butt joints and leaves joint fully exposed for miter correction, doweling, gluing or nailing. Quick release for fast adjustments. Large comfortable handle and acme threads for strength. Die cast frame for strength.

 

Ulmia D Size Miter Clamp Ring 10 Pack

Ulmia “D” Size Miter Clamp Ring 10 Pack

Ulmia “D” Size Miter Clamp Ring 10 Pack - Distance between points is 1 1/4 inch. The clamp rings are available in six sizes a-f as well as a “pinch clamp” for smaller work. “d”-size rings are the fourth smallest size in the a-f range. Useful for clamping and glueing crown moulding, base trim, chair rail, picture frames, cabinets, etc. The application tool allows for precise alignment and clamping of all sizes of miter joints. They are the largest size which is applied by the smaller pins on the plier tool. Search “ulmia clamp” to see all of the different sizes. Miter clamp pliers (sold separately) are required to apply and remove these rings. For use with mouldings with a width of 1 to 1 3/4 inch.

 

Collins Tool Miter Spring Clamps - 12 Pack

Collins Tool Miter Spring Clamps – 12 Pack

Collins Tool Miter Spring Clamps – 12 Pack - Clamps sharp points pierce the wood without cutting wood fibers and keep the pressure on. Clamps hold any compound miter as well as all awkward shapes and profiles. The clamps spread up to approximately 2 in. Made in usa. Easy to clean up the marks.

 

Big Horn 19685 Miter Clamps 1-Inch x 1-58-Inch 4-Pack Model 19685 Tools Hardware store

Big Horn 19685 Miter Clamps, 1-Inch x 1-5/8-Inch, 4-Pack, Model: 19685, Tools & Hardware store

Big Horn 19685 Miter Clamps, 1-Inch x 1-5/8-Inch, 4-Pack, Model: 19685, Tools & Hardware store - Big horn’s 1-inch-1-5/8-inch miter clamps are designed to be used with big horn 19680 25-piece miter clamp set (sold separately). 4-pack.

 

Big Horn 19686 Miter Clamps 1-34-Inch x 2-38-Inch 4-Pack

Big Horn 19686 Miter Clamps. 1-3/4-Inch x 2-3/8-Inch, 4-Pack

Big Horn 19686 Miter Clamps. 1-3/4-Inch x 2-3/8-Inch, 4-Pack - Big horn’s 1-3/4-inch-2-3/8-inch miter clamps are designed to be used with big horn 19680 25-piece miter clamp set (sold separately). 4-pack. .

 

Big Horn 19675 Miter Clamp Pliers

Big Horn 19675 Miter Clamp Pliers

Big Horn 19675 Miter Clamp Pliers - Use these pliers with big horn 19676 (1-1/4-inch), big horn 19677 (2-inch), big horn 19678 (2-3/4-inch), big horn 19679 (3-1/2-inch) spring clamps. These big horn pliers are the same quality pliers that come with big horn’s 19674 17-piece miter clamp set.

 

SPRING MITER CLAMP SET BY PEACHTREE WOODWORKING PW608

SPRING MITER CLAMP SET BY PEACHTREE WOODWORKING PW608

SPRING MITER CLAMP SET BY PEACHTREE WOODWORKING PW608 - Use the spreader to open and position the spring clamp. 1/2″ to 3/4″, 11/16″ to 1″, 1″ to 1-3/8″, 7/8″ to 1-3/16″, 1-3/4″ to 2-3/16″, 2-1/2″ to 3″. Kit includes form fitted storage case & spreader plus 4 each the following spring clamps. The quickest and easiest way to clamp mitered corners. Great for moldings, trim and frames.