Top 19 Flooring Nails

 

1lb Box of 2 12 8d Hardened Steel Flooring Nails

1lb Box of 2 1/2″ (8d) Hardened Steel Flooring Nails.

1lb Box of 2 1/2″ (8d) Hardened Steel Flooring Nails. - Made in the usa. Once you’ve experienced the quality and performance of our vintage reproductions, they’ll surely become your preferred choice for a variety of applications. These solid-steel nails are recommended for laying tongue-and-groove hardwood flooring (not recommended for face-nailing softwood flooring as the head is too small). Rooted in age-old tradition, our wide array of period restoration nails are cut much the same way they were 150 years ago. The result outstanding durability and holding power, designed to last a lifetime.

 

Porta-Nails 4702 16 Gauge 2-Inch Flooring Nails 1000 per Box

Porta-Nails 4702 16 Gauge 2-Inch Flooring Nails (1,000 per Box)

Porta-Nails 4702 16 Gauge 2-Inch Flooring Nails (1,000 per Box) - Well defined barbs to prevent the floor from moving. Full hard carbon steel construction to prevent the nail from bending during installation. 16 ga construction to prevent the nail from bending during installation. Covers 200 sq ft. Use for a variety of applications including t&g wood flooring, decorative paneling and ceiling, sub-flooring.

 

Porta-Nails 4703 16 Gauge 1-34-Inch Flooring Nails 1000 per Box

Porta-Nails 4703 16 Gauge 1-3/4-Inch Flooring Nails (1,000 per Box)

Porta-Nails 4703 16 Gauge 1-3/4-Inch Flooring Nails (1,000 per Box) - Full hard carbon steel construction to prevent the nail from bending during installation. Covers 200 sq ft. 16 ga construction to prevent the nail from bending during installation. Well defined barbs to prevent the floor from moving. Use for a variety of applications including t&g wood flooring, decorative paneling and ceiling, sub-flooring.

 

BOSTITCH FLN-150 1-12-Inch Flooring L-Nails 1000-Per Box

BOSTITCH FLN-150 1-1/2-Inch Flooring L-Nails, 1000-Per Box

BOSTITCH FLN-150 1-1/2-Inch Flooring L-Nails, 1000-Per Box - Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance. Our team of engineers leads the industry in innovation and design. Bostitch manufactures over 2000 types of fasteners. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the icc esr 2020, icc esr 1539 and icc er 5426 reports. Each fastener is engineered for optimal performance in bostitch tools, and for exceeding the performance expectations of our customers.

 

Grizzly H7826 Flooring Nailer

Grizzly H7826 Flooring Nailer

Grizzly H7826 Flooring Nailer - Includes extra base plate, mallet, bottle for oil, safety goggles and hex wrenches. Extended handle saves knee joints and leg muscles. Adjustable pneumatic control for variable material thickness and tongue position.

 

Freeman PDX50C 3-in-1 Flooring Cleat Nailer and Stapler

Freeman PDX50C 3-in-1 Flooring Cleat Nailer and Stapler

Freeman PDX50C 3-in-1 Flooring Cleat Nailer and Stapler - Uses 16-gauge t-cleats and l-cleats as well as, 155-gauge flooring staples ranging 1-1/2″ to 2″. Interchangeable base plates for 1/2 in, 3/4 in solid tongue and groove or engineered flooring. Fiberglass mallet included. The no-mar foot will protect the surface from scratches and is safe for pre-finished flooring. Ideal for 1/2″, 3/4″ solid tongue and groove flooring including hickory, maple, oak.

 

WEN 61953 3 in 1 Pneumatic Hardwood Flooring Nailer

WEN 61953 3 in 1 Pneumatic Hardwood Flooring Nailer

WEN 61953 3 in 1 Pneumatic Hardwood Flooring Nailer - Lightweight die cast aluminum construction-weighs 104-pound. Shoots 3 types of flooring fasteners-staples, l or t cleats. Operating pressure, 70-100 psi. Padded grip to limit hand fatigue. Includes, nailer, case, manual, mallet, wrenches, interchangeable base plate, lubricating oil, safety glasses, replacement bumper, gasket and o-rings.

 

Do it Hardened Flooring Nail

Do it Hardened Flooring Nail

Do it Hardened Flooring Nail - The oscillating multi-function tool will help trim molding and cabinets, cut door jambs, scrape away remnants from old flooring and sand in those hard-to-reach areas. The multi-tool comes with a scraper blade, cutting blade, sanding pad with paper, 6-foot power cord, allan wrench and a convenient carrying bag. Country of origin tw. The flooring nailer uses 15-1/2 gauge 1/2″ crown flooring staples and 16 gauge flooring l cleats. Flooring kit includes both a 2-1 flooring nailer and a multi-function oscillating tool.

 

Freeman 1-12 in 18-Gauge L-Cleat Flooring Nails

Freeman 1-1/2 in. 18-Gauge L-Cleat Flooring Nails

Freeman 1-1/2 in. 18-Gauge L-Cleat Flooring Nails - Glue collated 500 count box. Dimension. Steel bodies ensure a strong, long lasting connection. Freemans 1. 5 inch 18-gauge l-cleats are made of steel for strength and durability. Height12,li>width10. These nails fit most 18-gauge l-cleat flooring nailers. Length3. They feature serrated edges for superior grip to help prevent squeaking floors.

 

Powernail- Powercleats 16 Gauge Flooring Nails 2inches- 5000 Nails

Powernail- Powercleats 16 Gauge Flooring Nails 2inches- 5,000 Nails

Powernail- Powercleats 16 Gauge Flooring Nails 2inches- 5,000 Nails - Stainless steel nail for use with application requiring a non-corrosive nail. Approved for use on acq treated materials. 2inches- 5,000 nails. Well defined barbs to prevent the floor from moving. Cupped point which virtually eliminates splitting even with very hard species.

 

Freeman PF20GLCN 20 Gauge Flooring Nailer L Cleat

Freeman PF20GLCN 20 Gauge Flooring Nailer L Cleat

Freeman PF20GLCN 20 Gauge Flooring Nailer L Cleat - Lightweight tool great for extended use. The flooring base is interchangeable to allow for 90 degree nailing for staring courses and ending courses of flooring. Ideal for 5/16″, 9/16″ engineered or solid tongue and groove flooring including all types of bamboo and exotic hardwoods. Equipped with a quick release nose for easy jam clearing, tool-free depth adjust. Drives 20 gauge flooring cleats from 1″ to 1-1/4″ in length.

 

Freeman PFL618BR 3-in-1 Pneumatic Flooring Nailer

Freeman PFL618BR 3-in-1 Pneumatic Flooring Nailer

Freeman PFL618BR 3-in-1 Pneumatic Flooring Nailer - Ideal for ½”, ¾” solid tongue and groove flooring including hickory, maple, oak. Drives 15 ½” gauge ½” crown flooring staples, 16 gauge t and l cleats, loads 120 staples or 100 cleats. Drives three types of fasteners without changing magazine t-cleats l-cleats and staples. Two interchangeable floor plates to use for ½” and ¾” tongue and grove flooring the no-mar interchangeable base plates add stability and protection against scratches to floor surfaces. Durable plastic carrying case and wooden mallet included.

 

Freeman P50MTCK Flooring Nailer Kit with Oscillating Tool

Freeman P50MTCK Flooring Nailer Kit with Oscillating Tool

Freeman P50MTCK Flooring Nailer Kit with Oscillating Tool - Lightweight 2-in-1 flooring nailer is the ideal for 1/2-inch, 5/8-inch and 3/4-inch solid hardwood flooring projects including cherry, oak, maple, walnut and other nail down tongue and groove flooring. Flooring kit includes both a 2-1 flooring nailer and a multi-function oscillating tool. The multi-tool comes with a scraper blade, cutting blade, sanding pad with paper, 6-foot power cord, allan wrench and a convenient carrying bag. The oscillating multi-function tool will help trim molding and cabinets, cut door jambs, scrape away remnants from old flooring and sand in those hard-to-reach areas. The flooring nailer uses 15-1/2 gauge 1/2″ crown flooring staples and 16 gauge flooring l cleats.

 

Porta-Nail 42620 Flooring NailStaple Setting Tool

Porta-Nail 42620 Flooring Nail/Staple Setting Tool

Porta-Nail 42620 Flooring Nail/Staple Setting Tool - Wide striking head surface. Precision point for optimal placement. Durable construction for long lasting usability. Single handed design allows for precise alignment. Sets porta-nails.

 

Estwing EFL50Q 2-in-1 Pneumatic Flooring Nailer and Stapler

Estwing EFL50Q 2-in-1 Pneumatic Flooring Nailer and Stapler

Estwing EFL50Q 2-in-1 Pneumatic Flooring Nailer and Stapler - Light strike bumper and lightweight fiberglass mallet make installing flooring a breeze. Tool-free quick release lets you clear jams and get back to work quickly. Durable construction with lightweight aluminum body, 1-piece drive blade, and rubber o-rings. Padded bag has front and interior pockets to hold the included nailer, wrenches, oil, and white rubber head mallet. The flooring nailer uses 16 gauge l-cleats from 1-1/2″ to 2″ long and 15- ½” gauge ½” crown flooring staples from 1-1/2″ to 2″ long interchangeable base plates let you install 3/8″, 3/4″ solid hardwood including cherry, oak, maple, walnut and other nail down tongue and groove flooring.

 

NuMax SFL618 3-in-1 Pneumatic Flooring StaplerNailer with White Rubber Mallet

NuMax SFL618 3-in-1 Pneumatic Flooring Stapler/Nailer with White Rubber Mallet

NuMax SFL618 3-in-1 Pneumatic Flooring Stapler/Nailer with White Rubber Mallet - Uses any brand 155 gauge flooring staples and 16 gauge t and l cleats from 1-1/2″ to 2″ in length. Longer magazine for additional nail capacity. Long reach handle to relieve back strain. Includes wooden no-mar rubber mallet. Interchangeable base plates for ½”, 5/8″ and ¾” solid t&g flooring.

 

2 PACK BOSTITCH FLN-200 2-Inch Flooring L-Nail 1000-Per Box

2 PACK BOSTITCH FLN-200 2-Inch Flooring L-Nail, 1000-Per Box

2 PACK BOSTITCH FLN-200 2-Inch Flooring L-Nail, 1000-Per Box - Multiple blow design reduces user fatigue by requiring less force to drive a cleat. Preferred seating system provides accurate placement of fasteners at the proper angle and depth. 2 boxes two-inch l-shaped flooring cleats for the bostitch miiifn-industrial flooring cleat nailer. Ratcheting ram ensures the cleats are set properly by returning the ram after the cleat is completely set. Non-marring accessory shoes allow tongue and face nailing in a variety of sizes while preventing damage to the floor.

 

Powernail Model 445 16 Gauge Flooring Nailer

Powernail Model 445 16 Gauge Flooring Nailer

Powernail Model 445 16 Gauge Flooring Nailer - The standard configuration is a long handle with a short channel (l/s). The model 445 is a pneumatic powernailer® which uses 16 gage cleats for the installation of tongue & groove hardwood flooring. The model 445 is recommended for use on 5/8″, 3/4″ and 33/32″ flooring. . Nailer package includes a choice of black or white 3mi mallet, lube oil, 2 box wrenches, 2 allen wrenches, extra driving blade, 3/4″ & 5/8″ adapter pads and 2 shims.

 

Vaughan 192-06 SFM32 Flooring Nailer Mallet 32-Ounce Hickory Handle

Vaughan 192-06 SFM32 Flooring Nailer Mallet, 32-Ounce, Hickory Handle

Vaughan 192-06 SFM32 Flooring Nailer Mallet, 32-Ounce, Hickory Handle - Triple wedged hickory handle. Vaughan’s 32-ounce drop forged steel head provides extra driving power. Tapered end ideal for aligning. Replacement, non-marring 2-inch diameter rubber tips.