Top 21 Best Hss Hand Taps in 2020

 

North American Tool 20387 HSS Hand Tap Uncoated Bright Finish Bottom Chamfer 10-15 M Thread Type 294 Length #ad

North American Tool 20387 HSS Hand Tap, Uncoated Bright Finish, Bottom Chamfer, 10-1.5 M Thread Type, 2.94″ Length

North American Tool 20387 HSS Hand Tap, Uncoated Bright Finish, Bottom Chamfer, 10-1.5 M Thread Type, 2.94″ Length #ad - Plug chamfer is best suited for through holes or where there is sufficient room at the bottom in blind holes. For general purpose applications such as production tapping or hand tapping operations. Bottom chamfer is designed to tap to the bottom of the hole. Standard style hand taps have straight flutes. Made in the usa.

 

YG-1 A3 Series Vanadium Alloy HSS Hand Tap Uncoated Bright Finish Round Shank with Square End Taper Chamfer 6-40 Thread Size H2 Tolerance #ad

YG-1 A3 Series Vanadium Alloy HSS Hand Tap, Uncoated (Bright) Finish, Round Shank with Square End, Taper Chamfer, 6-40 Thread Size, H2 Tolerance

YG-1 A3 Series Vanadium Alloy HSS Hand Tap, Uncoated (Bright) Finish, Round Shank with Square End, Taper Chamfer, 6-40 Thread Size, H2 Tolerance #ad - Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

Ruko HSS Hand Tap Set DIN 2181 Ground Bright Finish Nr5 Nominal Thread Size 360 mm Length 2 Pieces R246050UNF #ad

Ruko HSS Hand Tap Set, DIN 2181, Ground, Bright Finish, Nr.5 Nominal Thread Size, 36.0 mm Length, 2 Pieces, R246050UNF

Ruko HSS Hand Tap Set, DIN 2181, Ground, Bright Finish, Nr.5 Nominal Thread Size, 36.0 mm Length, 2 Pieces, R246050UNF #ad - For through threads and bottoming threads in unalloyed and low-alloyed steels up to a strength of 800 n per square millimetre, malleable cast iron and non-ferrous metals. The hand tap consists of heavy-duty high-speed steel. The thread is cut in three operation.

 

Ruko HSS Hand Tap Set DIN 352 Ground Bright Finish 34 inches Nominal Thread Size 950 mm Length 3 Pieces R246034 #ad

Ruko HSS Hand Tap Set, DIN 352, Ground, Bright Finish, 3/4 inches Nominal Thread Size, 95.0 mm Length, 3 Pieces, R246034

Ruko HSS Hand Tap Set, DIN 352, Ground, Bright Finish, 3/4 inches Nominal Thread Size, 95.0 mm Length, 3 Pieces, R246034 #ad - For through threads and bottoming threads in unalloyed and low-alloyed steels up to a strength of 800 n per square millimetre, malleable cast iron and non-ferrous metals. The thread is cut in three operation. The hand tap consists of heavy-duty high-speed steel.

 

Special Size HSS Hand Tap 916 Size 27 Threads per Inch BOTTOMING #ad

Special Size, HSS Hand Tap, 9/16″ Size, 27 Threads per Inch, BOTTOMING

Special Size, HSS Hand Tap, 9/16″ Size, 27 Threads per Inch, BOTTOMING #ad - Shank square as per din 10. Thread angle 60 degree. Thread metric, din iso 13. Tenacity classes 800 n/ mm2. Cutting direction right hand cutting.

 

North American Tool 16554 HSS Hand Tap Uncoated Bright Finish Bottom Chamfer 34-20 NEF Thread Type 425 Length #ad

North American Tool 16554 HSS Hand Tap, Uncoated Bright Finish, Bottom Chamfer, 3/4″-20 NEF Thread Type, 4.25″ Length

North American Tool 16554 HSS Hand Tap, Uncoated Bright Finish, Bottom Chamfer, 3/4″-20 NEF Thread Type, 4.25″ Length #ad - Made in the usa. Standard style hand taps have straight flutes. For general purpose applications such as production tapping or hand tapping operations. Bottom chamfer is designed to tap to the bottom of the hole. Plug chamfer is best suited for through holes or where there is sufficient room at the bottom in blind holes.

 

Special Size HSS Hand Tap 916 Size 28 Threads per Inch BOTTOMING #ad

Special Size, HSS Hand Tap, 9/16″ Size, 28 Threads per Inch, BOTTOMING

Special Size, HSS Hand Tap, 9/16″ Size, 28 Threads per Inch, BOTTOMING #ad - High speed steel (hss) pipe taps are designed to clean and or re-thread damaged or jam pipe threads. Rh (right hand), bright (uncoated), hand taps, machine taps. Package include 1 x hand tap bsp british standard pipe threads. Round shank with square end material hss, ground thread. Bsp british standard pipe hss hand taps, available sizes g1/8, g¼, g3/8, g½, g¾, g1″.

 

Ruko HSS Hand Tap Set DIN 352 Left-Handed Thread Ground Bright Finish M 10 x 150 mm Nominal Thread Size 700 mm Length 3 Pieces R230100LI #ad

Ruko HSS Hand Tap Set, DIN 352, Left-Handed Thread, Ground, Bright Finish, M 10 x 1.50 mm Nominal Thread Size, 70.0 mm Length, 3 Pieces, R230100LI

Ruko HSS Hand Tap Set, DIN 352, Left-Handed Thread, Ground, Bright Finish, M 10 x 1.50 mm Nominal Thread Size, 70.0 mm Length, 3 Pieces, R230100LI #ad - The thread is cut in three operation. For through threads and bottoming threads in unalloyed and low-alloyed steels up to a strength of 800 n per square millimetre, malleable cast iron and non-ferrous metals. The hand tap consists of heavy-duty high-speed steel.

 

Special Size HSS Hand Tap 58 Size 28 Threads per Inch PLUG #ad

Special Size, HSS Hand Tap, 5/8″ Size, 28 Threads per Inch, PLUG

Special Size, HSS Hand Tap, 5/8″ Size, 28 Threads per Inch, PLUG #ad - High speed steel, ground thread.

 

Special Size HSS Hand Tap 1316 Size 14 Threads per Inch BOTTOMING #ad

Special Size, HSS Hand Tap, 13/16″ Size, 14 Threads per Inch, BOTTOMING

Special Size, HSS Hand Tap, 13/16″ Size, 14 Threads per Inch, BOTTOMING #ad - High speed steel, ground thread.

 

Special Size HSS Hand Tap 516 Size 32 Threads per Inch BOTTOMING #ad

Special Size, HSS Hand Tap, 5/16″ Size, 32 Threads per Inch, BOTTOMING

Special Size, HSS Hand Tap, 5/16″ Size, 32 Threads per Inch, BOTTOMING #ad - High speed steel, ground thread.

 

Special Size HSS Hand Tap 34 Size 27 Threads per Inch Bottoming #ad

Special Size, HSS Hand Tap, 3/4″ Size, 27 Threads per Inch, Bottoming

Special Size, HSS Hand Tap, 3/4″ Size, 27 Threads per Inch, Bottoming #ad - Bottom chamfer is designed to tap to the bottom of the hole. For general purpose applications such as production tapping or hand tapping operations. Standard style hand taps have straight flutes. Made in the usa. Plug chamfer is best suited for through holes or where there is sufficient room at the bottom in blind holes.

 

Special Size HSS Hand Tap 1532 Size 32 Threads per Inch Plug #ad

Special Size, HSS Hand Tap, 15/32″ Size, 32 Threads per Inch, Plug

Special Size, HSS Hand Tap, 15/32″ Size, 32 Threads per Inch, Plug #ad - High speed steel, ground thread.

 

Alfa Tools HTP170052 1-14 HSS Hand Tap-Plug 3 Pack #ad

Alfa Tools HTP170052 1-14 HSS Hand Tap-Plug (3 Pack)

Alfa Tools HTP170052 1-14 HSS Hand Tap-Plug (3 Pack) #ad - Quantity 3 per pack. Alfa usa tools hand tap. 1-inch by 14 tap size, 4 flutes. Plug taps (3 to 5 threads) most common chamfer used in through or blind holes. General purpose taps can be used by hand or under power, in through (open both ends) or blind holes (closed one end).

 

Special Size HSS Hand Tap 732 Size 40 Threads per Inch TAPER #ad

Special Size, HSS Hand Tap, 7/32″ Size, 40 Threads per Inch, TAPER

Special Size, HSS Hand Tap, 7/32″ Size, 40 Threads per Inch, TAPER #ad - Made in the usa. Bottom chamfer is designed to tap to the bottom of the hole. For general purpose applications such as production tapping or hand tapping operations. Standard style hand taps have straight flutes. Plug chamfer is best suited for through holes or where there is sufficient room at the bottom in blind holes.

 

North American Tool 16166 HSS Hand Tap Uncoated Bright Finish Bottom Chamfer 12-28 NEF Thread Type 338 Length #ad

North American Tool 16166 HSS Hand Tap, Uncoated Bright Finish, Bottom Chamfer, 1/2″-28 NEF Thread Type, 3.38″ Length

North American Tool 16166 HSS Hand Tap, Uncoated Bright Finish, Bottom Chamfer, 1/2″-28 NEF Thread Type, 3.38″ Length #ad - Made in the usa. Plug chamfer is best suited for through holes or where there is sufficient room at the bottom in blind holes. Bottom chamfer is designed to tap to the bottom of the hole. For general purpose applications such as production tapping or hand tapping operations. Standard style hand taps have straight flutes.

 

12 - 28 UNEF HSS Machine Tap Right Hand Thread Tap Plug Tap #ad

1/2″ – 28 UNEF HSS Machine Tap, Right Hand Thread Tap, Plug Tap

1/2″ – 28 UNEF HSS Machine Tap, Right Hand Thread Tap, Plug Tap #ad - Bottom chamfer is designed to tap to the bottom of the hole. Standard style hand taps have straight flutes. For general purpose applications such as production tapping or hand tapping operations. Plug chamfer is best suited for through holes or where there is sufficient room at the bottom in blind holes. Made in the usa.

 

Exact 30107 DIN 352B M12 HSS Hand Taps Set of 3 #ad

Exact 30107 DIN 352B M12 HSS Hand Taps (Set of 3)

Exact 30107 DIN 352B M12 HSS Hand Taps (Set of 3) #ad - The hand tap consists of heavy-duty high-speed steel. -3. -1 second tap article no. Also available individually taper tap article no. The thread is cut in three operation. -2 final tap article no. For through threads and bottoming threads in unalloyed and low-alloyed steels up to a strength of 800 n/mm, malleable cast iron and non-ferrous metals.

 

North American Tool 20497 HSS Hand Tap Uncoated Bright Finish Plug Chamfer 12-125 M Thread Type 338 Length #ad

North American Tool 20497 HSS Hand Tap, Uncoated Bright Finish, Plug Chamfer, 12-1.25 M Thread Type, 3.38″ Length

North American Tool 20497 HSS Hand Tap, Uncoated Bright Finish, Plug Chamfer, 12-1.25 M Thread Type, 3.38″ Length #ad - Made in the usa. Plug chamfer is best suited for through holes or where there is sufficient room at the bottom in blind holes. Standard style hand taps have straight flutes. Bottom chamfer is designed to tap to the bottom of the hole. For general purpose applications such as production tapping or hand tapping operations.

 

Ruko HSS Hand Tap Set DIN 352 Ground Bright Finish Nr3 Nominal Thread Size 360 mm Length 3 Pieces R246030UNC #ad

Ruko HSS Hand Tap Set, DIN 352, Ground, Bright Finish, Nr.3 Nominal Thread Size, 36.0 mm Length, 3 Pieces, R246030UNC

Ruko HSS Hand Tap Set, DIN 352, Ground, Bright Finish, Nr.3 Nominal Thread Size, 36.0 mm Length, 3 Pieces, R246030UNC #ad - For through threads and bottoming threads in unalloyed and low-alloyed steels up to a strength of 800 n per square millimetre, malleable cast iron and non-ferrous metals. The thread is cut in three operation. The hand tap consists of heavy-duty high-speed steel.

 

YG-1 A7 Series Vanadium Alloy HSS Hand Tap Uncoated Bright Finish Round Shank with Square End Bottoming Chamfer 916-12 Thread Size H3 Tolerance #ad

YG-1 A7 Series Vanadium Alloy HSS Hand Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, 9/16″-12 Thread Size, H3 Tolerance

YG-1 A7 Series Vanadium Alloy HSS Hand Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, 9/16″-12 Thread Size, H3 Tolerance #ad - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.