Top 23 Best Steel Bandsaws in 2020

 

Magnate M72C12H6 Carbon Tool Steel Bandsaw Blade 72 Long - 12 Width 6 Hook Tooth #ad

Magnate M72C12H6 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/2″ Width; 6 Hook Tooth

Magnate M72C12H6 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/2″ Width; 6 Hook Tooth #ad - E. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72 inch ( 6 ft. Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Pine, polar, fir and spruce. In order to cut metal materials, the following is a guideline for choosing the adequate tooth pattern of a carbon tool steel bandsaw blade. , 6′ ) bandsaw blades suit the following models shopsmith 10. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Use 24 raker to cut 1/16″ to 1/4″ thick material, use 18 raker to cut 1/8″ to 3/8″ thick material, use 14 raker to cut 3/16″ to 7/16″ thick material, use 10 raker to cut 1/4″ to 5/8″ thick material, use 6 hook to cut 3/8″ to 2″ thick material, use 4 hook to cut 3/4″ to 4-1/2″ thick material, use 3 hook to cut 1″ to 6″ thick material, use 2 hook to cut 2″ to 12″ thick material, note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It is also used for cutting plastics, aluminum, metals, and mild steel. E. All bandsaw blades are folded into 3 rings to avoid bulky packaging, the picture depicted represents one blade the pricing is for one blade/package. It can cut all types of woods and is especially ideal for soft woods i. Steel). The type of tooth pattern used depends on the thickness of metal material to be cut.

 

Magnate M80C14R24 Carbon Tool Steel Bandsaw Blade 80 Long - 14 Width 24 Raker Tooth #ad

Magnate M80C14R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/4″ Width; 24 Raker Tooth

Magnate M80C14R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/4″ Width; 24 Raker Tooth #ad - Steel). Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 2, if the owner’s manual is not available, refer to previous invoices. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft. E. Carbon tool steel bandsaw blades are made from high end carbon steel. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. It can cut all types of woods and is especially ideal for soft woods i. Pine, polar, fir and spruce. It is also used for cutting plastics, aluminum, metals, and mild steel. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. The picture depicted represents one blade the pricing is for one blade/package.

 

Magnate M9975C34H2 Carbon Tool Steel Bandsaw Blade 99-34 Long - 34 Width 2 Hook Tooth #ad

Magnate M99.75C34H2 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 3/4″ Width; 2 Hook Tooth

Magnate M99.75C34H2 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 3/4″ Width; 2 Hook Tooth #ad - 3-3/4 inch, 8′ 3-3/4″ ) bandsaw blades suit the following models craftsman professional 14 general international 90-100 m1 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 99-3/4 inch ( 8 ft. Carbon tool steel bandsaw blades are made from high end carbon steel. It is also used for cutting plastics, aluminum, metals, and mild steel. Steel). Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. 3, cut your old bandsaw blade so that it lies flat on a level surf. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. The picture depicted represents one blade the pricing is for one blade/package. It can cut all types of woods and is especially ideal for soft woods i. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Pine, polar, fir and spruce. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 2, if the owner’s manual is not available, refer to previous invoices.

 

Magnate M675C14H4 Carbon Tool Steel Bandsaw Blade 67-12 Long - 14 Width 4 Hook Tooth #ad

Magnate M67.5C14H4 Carbon Tool Steel Bandsaw Blade, 67-1/2″ Long – 1/4″ Width; 4 Hook Tooth

Magnate M67.5C14H4 Carbon Tool Steel Bandsaw Blade, 67-1/2″ Long – 1/4″ Width; 4 Hook Tooth #ad - There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 67-1/2 inch ( 5 ft. E. It can cut all types of woods and is especially ideal for soft woods i. In order to cut metal materials, the following is a guideline for choosing the adequate tooth pattern of a carbon tool steel bandsaw blade. Carbon tool steel bandsaw blades are made from high end carbon steel. The type of tooth pattern used depends on the thickness of metal material to be cut. E. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It is also used for cutting plastics, aluminum, metals, and mild steel. All bandsaw blades are folded into 3 rings to avoid bulky packaging, the picture depicted represents one blade the pricing is for one blade/package. Use 24 raker to cut 1/16″ to 1/4″ thick material, use 18 raker to cut 1/8″ to 3/8″ thick material, use 14 raker to cut 3/16″ to 7/16″ thick material, use 10 raker to cut 1/4″ to 5/8″ thick material, use 6 hook to cut 3/8″ to 2″ thick material, use 4 hook to cut 3/4″ to 4-1/2″ thick material, use 3 hook to cut 1″ to 6″ thick material, use 2 hook to cut 2″ to 12″ thick material, note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 7-1/2 inch, 5′ 7-1/2″ ) bandsaw blades suit the following models 10″ rikon 10-300 jet jwbs-10os. Pine, polar, fir and spruce. Steel). Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced.

 

Magnate M80C38R24 Carbon Tool Steel Bandsaw Blade 80 Long - 38 Width 24 Raker Tooth #ad

Magnate M80C38R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/8″ Width; 24 Raker Tooth

Magnate M80C38R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/8″ Width; 24 Raker Tooth #ad - Steel). Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft. 2, if the owner’s manual is not available, refer to previous invoices. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. It can cut all types of woods and is especially ideal for soft woods i. It is also used for cutting plastics, aluminum, metals, and mild steel. 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Pine, polar, fir and spruce. Carbon tool steel bandsaw blades are made from high end carbon steel. The picture depicted represents one blade the pricing is for one blade/package. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E.

 

Magnate M80C14R14 Carbon Tool Steel Bandsaw Blade 80 Long - 14 Width 14 Raker Tooth #ad

Magnate M80C14R14 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/4″ Width; 14 Raker Tooth

Magnate M80C14R14 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/4″ Width; 14 Raker Tooth #ad - It is also used for cutting plastics, aluminum, metals, and mild steel. Steel). Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Carbon tool steel bandsaw blades are made from high end carbon steel. Pine, polar, fir and spruce. It can cut all types of woods and is especially ideal for soft woods i. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. The picture depicted represents one blade the pricing is for one blade/package. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. 2, if the owner’s manual is not available, refer to previous invoices. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results.

 

Magnate M72C12H3 Carbon Tool Steel Bandsaw Blade 72 Long - 12 Width 3 Hook Tooth #ad

Magnate M72C12H3 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/2″ Width; 3 Hook Tooth

Magnate M72C12H3 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/2″ Width; 3 Hook Tooth #ad - 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. 2, if the owner’s manual is not available, refer to previous invoices. E. The picture depicted represents one blade the pricing is for one blade/package. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. , 6′ ) bandsaw blades suit the following models shopsmith 10 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It is also used for cutting plastics, aluminum, metals, and mild steel. Pine, polar, fir and spruce. E. It can cut all types of woods and is especially ideal for soft woods i. Carbon tool steel bandsaw blades are made from high end carbon steel. Steel). This method will provide the most possible. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72 inch ( 6 ft.

 

Magnate M64C38H3 Carbon Tool Steel Bandsaw Blade 64 Long - 38 Width 3 Hook Tooth #ad

Magnate M64C38H3 Carbon Tool Steel Bandsaw Blade, 64″ Long – 3/8″ Width; 3 Hook Tooth

Magnate M64C38H3 Carbon Tool Steel Bandsaw Blade, 64″ Long – 3/8″ Width; 3 Hook Tooth #ad - Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. This method will provide th. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. The picture depicted represents one blade the pricing is for one blade/package. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 64 inch ( 5 ft. It can cut all types of woods and is especially ideal for soft woods i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Carbon tool steel bandsaw blades are made from high end carbon steel. 4 inch, 5′ 4″ ) bandsaw blades suit the following model grizzly g1052 9″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. It is also used for cutting plastics, aluminum, metals, and mild steel. 2, if the owner’s manual is not available, refer to previous invoices. Steel). Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Pine, polar, fir and spruce. E. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length.

 

Magnate M705C14R24 Carbon Tool Steel Bandsaw Blade 70-12 Long - 14 Width 24 Raker Tooth #ad

Magnate M70.5C14R24 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/4″ Width; 24 Raker Tooth

Magnate M70.5C14R24 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/4″ Width; 24 Raker Tooth #ad - E. Carbon tool steel bandsaw blades are made from high end carbon steel. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Pine, polar, fir and spruce. 3, cut your old bandsaw blade so that it lies flat on a level sur. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. It is also used for cutting plastics, aluminum, metals, and mild steel. Steel). It can cut all types of woods and is especially ideal for soft woods i. The picture depicted represents one blade the pricing is for one blade/package. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 2, if the owner’s manual is not available, refer to previous invoices. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft.

 

Magnate M80C38R10 Carbon Tool Steel Bandsaw Blade 80 Long - 38 Width 10 Raker Tooth #ad

Magnate M80C38R10 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/8″ Width; 10 Raker Tooth

Magnate M80C38R10 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/8″ Width; 10 Raker Tooth #ad - The picture depicted represents one blade the pricing is for one blade/package. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It is also used for cutting plastics, aluminum, metals, and mild steel. 2, if the owner’s manual is not available, refer to previous invoices. E. Pine, polar, fir and spruce. 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Steel). Carbon tool steel bandsaw blades are made from high end carbon steel. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft. E. It can cut all types of woods and is especially ideal for soft woods i.

 

Magnate M705C38R24 Carbon Tool Steel Bandsaw Blade 70-12 Long - 38 Width 24 Raker Tooth #ad

Magnate M70.5C38R24 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 3/8″ Width; 24 Raker Tooth

Magnate M70.5C38R24 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 3/8″ Width; 24 Raker Tooth #ad - Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. It can cut all types of woods and is especially ideal for soft woods i. It is also used for cutting plastics, aluminum, metals, and mild steel. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360, 912 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 3, cut your old bandsaw blade so that it lies flat on a level sur. 2, if the owner’s manual is not available, refer to previous invoices. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. E. Pine, polar, fir and spruce. Steel).

 

Magnate M9975C14R14 Carbon Tool Steel Bandsaw Blade 99-34 Long - 14 Width 14 Raker Tooth #ad

Magnate M99.75C14R14 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/4″ Width; 14 Raker Tooth

Magnate M99.75C14R14 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/4″ Width; 14 Raker Tooth #ad - It is also used for cutting plastics, aluminum, metals, and mild steel. 3-3/4 inch, 8′ 3-3/4″ ) bandsaw blades suit the following models craftsman professional 14 general international 90-100 m1 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. E. Pine, polar, fir and spruce. The picture depicted represents one blade the pricing is for one blade/package. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 99-3/4 inch ( 8 ft. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It can cut all types of woods and is especially ideal for soft woods i. 2, if the owner’s manual is not available, refer to previous invoices. Steel). 3, cut your old bandsaw blade so that it lies flat on a level surf. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced.

 

Magnate M9975C34H3 Carbon Tool Steel Bandsaw Blade 99-34 Long - 34 Width 3 Hook Tooth #ad

Magnate M99.75C34H3 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 3/4″ Width; 3 Hook Tooth

Magnate M99.75C34H3 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 3/4″ Width; 3 Hook Tooth #ad - 3-3/4 inch, 8′ 3-3/4″ ) bandsaw blades suit the following models craftsman professional 14 general international 90-100 m1 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. It can cut all types of woods and is especially ideal for soft woods i. Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. E. Steel). Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It is also used for cutting plastics, aluminum, metals, and mild steel. 3, cut your old bandsaw blade so that it lies flat on a level surf. The picture depicted represents one blade the pricing is for one blade/package. Pine, polar, fir and spruce. E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 99-3/4 inch ( 8 ft. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 2, if the owner’s manual is not available, refer to previous invoices.

 

Magnate M72C14R10 Carbon Tool Steel Bandsaw Blade 72 Long - 14 Width 10 Raker Tooth #ad

Magnate M72C14R10 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/4″ Width; 10 Raker Tooth

Magnate M72C14R10 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/4″ Width; 10 Raker Tooth #ad - Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72 inch ( 6 ft. , 6′ ) bandsaw blades suit the following models shopsmith 10 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Carbon tool steel bandsaw blades are made from high end carbon steel. This method will provide the most possible. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. 2, if the owner’s manual is not available, refer to previous invoices. E. It can cut all types of woods and is especially ideal for soft woods i. E. Pine, polar, fir and spruce. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. The picture depicted represents one blade the pricing is for one blade/package. Steel). It is also used for cutting plastics, aluminum, metals, and mild steel.

 

Magnate M80C34H2 Carbon Tool Steel Bandsaw Blade 80 Long - 34 Width 2 Hook Tooth #ad

Magnate M80C34H2 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/4″ Width; 2 Hook Tooth

Magnate M80C34H2 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/4″ Width; 2 Hook Tooth #ad - E. A carbon tool steel bandsaw blade is made from high carbon steel. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. It is also suitable for cutting plastics, aluminum, metals, and mild steel. All bandsaw blades are folded into 3 rings to avoid bulky packaging, the picture depicted represents one blade the pricing is for one blade/package. It can cut all types of woods, especially ideal for soft woods i. 2, if the owner’s manual is not available, refer to previous invoices.  8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications - not only the length, but also the range of the width and thickness. . This method will provide the most possible accurate length. Pine, polar, fir and spruce. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft. For best results, cut mild steel at  speeds under 200 fpm (feet per minute), with liquid coolant running along the back of the blade.

 

Magnate M925C38R10 Carbon Tool Steel Bandsaw Blade 92-12 Long - 38 Width 10 Raker Tooth #ad

Magnate M92.5C38R10 Carbon Tool Steel Bandsaw Blade, 92-1/2″ Long – 3/8″ Width; 10 Raker Tooth

Magnate M92.5C38R10 Carbon Tool Steel Bandsaw Blade, 92-1/2″ Long – 3/8″ Width; 10 Raker Tooth #ad - 8-1/2 inch, 7′ 8-1/2″ ) bandsaw blades suit the following models jet j-8203k powerline mark 1 shopcraft 28-283f mit 5125 american industrial amt 4113 enco 505-1372 (models 8201, 8203, 8201vs and 8203vs), 199-9013, 199-9011, 199-9001 dayton 3z981 central machinery 32206-ocea, 32208-ocea, 5687-ocea, 2146-3bmf, 00580-ocea nu-mark 14″ united 14″ wilton tradesman 8201, 8203, 8201vs, 8203vs grizzly g0580x g0555x (92-1/2″ to 93-1/2″) 14″ ohio fo. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It is also used for cutting plastics, aluminum, metals, and mild steel. Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It can cut all types of woods and is especially ideal for soft woods i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Pine, polar, fir and spruce. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92-1/2 inch ( 7 ft. The picture depicted represents one blade the pricing is for one blade/package. Steel). E. E.

 

Magnate M80C12R14 Carbon Tool Steel Bandsaw Blade 80 Long - 12 Width 14 Raker Tooth #ad

Magnate M80C12R14 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/2″ Width; 14 Raker Tooth

Magnate M80C12R14 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/2″ Width; 14 Raker Tooth #ad - E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel). Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. It is also used for cutting plastics, aluminum, metals, and mild steel. 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. 2, if the owner’s manual is not available, refer to previous invoices. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It can cut all types of woods and is especially ideal for soft woods i. Pine, polar, fir and spruce. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Carbon tool steel bandsaw blades are made from high end carbon steel. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft.

 

Magnate M93C34R14 Carbon Tool Steel Bandsaw Blade 93 Long - 34 Width 14 Raker Tooth #ad

Magnate M93C34R14 Carbon Tool Steel Bandsaw Blade, 93″ Long – 3/4″ Width; 14 Raker Tooth

Magnate M93C34R14 Carbon Tool Steel Bandsaw Blade, 93″ Long – 3/4″ Width; 14 Raker Tooth #ad - 9 inch, 7′ 9″ ) bandsaw blades suit the following models sears craftsman professional 7″ x 12″ dayton 5z412 6″ x 10″, wilton 3400 6″ x 10″ grizzly g0580x, g0555x (92-1/2″ to 93-1/2″), g1758 7″ x 12″,g9978 7″ x 12″ enco 137-3163, 137-3167, 137-3169, 137-3171, 137-3175, 137-3178, 137-3190, 137-3195, 137-2000, swivel head, 240-7179 black and decker 1752delta 28-243, 28-283,28-203, 28-303, 28-240 jet hvbs-7m, hvbs-7mw, j-3410 7″ x 12″ dake se712 general. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. E. Carbon tool steel bandsaw blades are made from high end carbon steel. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Pine, polar, fir and spruce. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. It can cut all types of woods and is especially ideal for soft woods i. It is also used for cutting plastics, aluminum, metals, and mild steel. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 93 inch ( 7 ft. The picture depicted represents one blade the pricing is for one blade/package. Steel).

 

Magnate M62C12H3 Carbon Tool Steel Bandsaw Blade 62 Long - 12 Width 3 Hook Tooth #ad

Magnate M62C12H3 Carbon Tool Steel Bandsaw Blade, 62″ Long – 1/2″ Width; 3 Hook Tooth

Magnate M62C12H3 Carbon Tool Steel Bandsaw Blade, 62″ Long – 1/2″ Width; 3 Hook Tooth #ad - Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Pine, polar, fir and spruce. It is also used for cutting plastics, aluminum, metals, and mild steel. 2 inch, 5′ 2″ ) bandsaw blades suit the following models skil 3104 sears craftsman 103-24556, 2442 9ht2442n central machinery d0686-4bmf, 01629-icea mark 1 rexon bs-12 alltrade 1996bbr powerline dbs-12 jet dbs-12 black & decker (some models) grizzly g8976 12″ walker-turner 10″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Carbon tool steel bandsaw blades are made from high end carbon steel. The picture depicted represents one blade the pricing is for one blade/package. It can cut all types of woods and is especially ideal for soft woods i. Steel). Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 62 inch ( 5 ft. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E.

 

Magnate M62C38R24 Carbon Tool Steel Bandsaw Blade 62 Long - 38 Width 24 Raker Tooth #ad

Magnate M62C38R24 Carbon Tool Steel Bandsaw Blade, 62″ Long – 3/8″ Width; 24 Raker Tooth

Magnate M62C38R24 Carbon Tool Steel Bandsaw Blade, 62″ Long – 3/8″ Width; 24 Raker Tooth #ad - Steel). Carbon tool steel bandsaw blades are made from high end carbon steel. Pine, polar, fir and spruce. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 62 inch ( 5 ft. 2 inch, 5′ 2″ ) bandsaw blades suit the following models skil 3104 sears craftsman 103-24556, 2442 9ht2442n central machinery d0686-4bmf, 01629-icea mark 1 rexon bs-12 alltrade 1996bbr powerline dbs-12 jet dbs-12 black & decker (some models) grizzly g8976 12″ walker-turner 10″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. The picture depicted represents one blade the pricing is for one blade/package. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It can cut all types of woods and is especially ideal for soft woods i. E. It is also used for cutting plastics, aluminum, metals, and mild steel.

 

Magnate M92C12H3 Carbon Tool Steel Bandsaw Blade 92 Long - 12 Width 3 Hook Tooth #ad

Magnate M92C12H3 Carbon Tool Steel Bandsaw Blade, 92″ Long – 1/2″ Width; 3 Hook Tooth

Magnate M92C12H3 Carbon Tool Steel Bandsaw Blade, 92″ Long – 1/2″ Width; 3 Hook Tooth #ad - It is also used for cutting plastics, aluminum, metals, and mild steel. It can cut all types of woods and is especially ideal for soft woods i. The picture depicted represents one blade the pricing is for one blade/package. 2, if the owner’s manual is not available, refer to previous invoices. Steel). Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. E. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 8 inch, 7′ 8″ ) bandsaw blades suit the following models enco 199-9001 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Carbon tool steel bandsaw blades are made from high end carbon steel. Pine, polar, fir and spruce. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This method will provide the mos. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92 inch ( 7 ft.

 

Magnate M705C14R18 Carbon Tool Steel Bandsaw Blade 70-12 Long - 14 Width 18 Raker Tooth #ad

Magnate M70.5C14R18 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/4″ Width; 18 Raker Tooth

Magnate M70.5C14R18 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/4″ Width; 18 Raker Tooth #ad - 3, cut your old bandsaw blade so that it lies flat on a level sur. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It can cut all types of woods and is especially ideal for soft woods i. It is also used for cutting plastics, aluminum, metals, and mild steel. Carbon tool steel bandsaw blades are made from high end carbon steel. Steel). Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. Pine, polar, fir and spruce. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360, 912 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 2, if the owner’s manual is not available, refer to previous invoices. E.

 

Magnate M91C38H6 Carbon Tool Steel Bandsaw Blade 91 Long - 38 Width 6 Hook Tooth #ad

Magnate M91C38H6 Carbon Tool Steel Bandsaw Blade, 91″ Long – 3/8″ Width; 6 Hook Tooth

Magnate M91C38H6 Carbon Tool Steel Bandsaw Blade, 91″ Long – 3/8″ Width; 6 Hook Tooth #ad - Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Steel). It can cut all types of woods and is especially ideal for soft woods i. 7 inch, 7′ 7″ ) bandsaw blades suit the following models sears 12″ craftman if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. The picture depicted represents one blade the pricing is for one blade/package. It is also used for cutting plastics, aluminum, metals, and mild steel. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. This method will provide. E. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 2, if the owner’s manual is not available, refer to previous invoices. Carbon tool steel bandsaw blades are made from high end carbon steel. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 91 inch ( 7 ft. Pine, polar, fir and spruce.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.