Top 25 Brass Wood Screws for 2019

 

Crown Bolt 23572 10 x 2 Inch Flat-Head Phillips Brass Wood Screws 50-Count #ad

Crown Bolt 23572 #10 x 2 Inch Flat-Head Phillips Brass Wood Screws, 50-Count

Crown Bolt 23572 #10 x 2 Inch Flat-Head Phillips Brass Wood Screws, 50-Count #ad - For general applications. Brass #10 x 2 inch wood screws flat head phillips. Brass finish. #10 body diameter. 2-inch fastener length.

 

14 x 2 Solid Brass Wood Screw Slotted Oval Head Qty 50 #ad

#14 x 2″ Solid Brass Wood Screw Slotted Oval Head Qty 50

#14 x 2″ Solid Brass Wood Screw Slotted Oval Head Qty 50 #ad - Tensile strength, a common measure to compare the strength of a fastener. Screw body size#14 (0. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. Yield30,000, 50,000 psipackage quantity50 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. It is the load needed to pull the fastener apart. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. . The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. 242″)body length2″drive typeslottedhead styleoval headmaterialsolid brasstensile strength50,000, 65,000 psidrive styleslottedhardness40-75 rockwell b min. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”.

 

4 x 1-14 Slotted Oval Head Solid Brass Wood Screw Qty 100 #ad

#4 x 1-1/4″ Slotted Oval Head Solid Brass Wood Screw Qty 100

#4 x 1-1/4″ Slotted Oval Head Solid Brass Wood Screw Qty 100 #ad - It is the load needed to pull the fastener apart. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. Tensile strength, a common measure to compare the strength of a fastener. 112″)body length1-1/4″drive typeslottedhead styleoval headmaterialsolid brasstensile strength50,000, 65,000 psidrive styleslottedhardness40-75 rockwell b min. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. Screw body size#4 (0. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. Yield30,000, 50,000 psipackage quantity100 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed.

 

8 x 1 Solid Brass Round Head Wood Screw Qty 100 Pieces Slotted Drive Number 8 Size x 1 Length #ad

#8 x 1″ Solid Brass Round Head Wood Screw Qty 100 Pieces, Slotted Drive, Number 8 Size x 1″ Length

#8 x 1″ Solid Brass Round Head Wood Screw Qty 100 Pieces, Slotted Drive, Number 8 Size x 1″ Length #ad - . A screw designed for a wood or a similar material, with a point, a relatively coarse thread, a thick shank, and, usually, an unthreaded portion of the shank at the head end.

 

Phillips Flat Head Brass Wood Screw #ad

Phillips Flat Head Brass Wood Screw

Phillips Flat Head Brass Wood Screw #ad - No 10 x 1-1/2 , brass. Hillman brass wood screw. Boxed/100. Wood screws. Phillips ,flat head.

 

2x34 PHIL FLAT HEAD Brass Wood Screw 100box #ad

#2×3/4″ PHIL FLAT HEAD Brass Wood Screw (100/box)

#2×3/4″ PHIL FLAT HEAD Brass Wood Screw (100/box) #ad - Screws, solid brass. Head diameter 0303″. Tensile strength 50,000, 60,000 psi. # 6 x 2″ brass flat head phillips wood screws (pack of 12). Head height 0123″.

 

3 x 38 Slotted Round Head Solid Brass Wood Screw Qty 100 #ad

#3 x 3/8″ Slotted Round Head Solid Brass Wood Screw Qty 100

#3 x 3/8″ Slotted Round Head Solid Brass Wood Screw Qty 100 #ad - There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. 099″)body length3/8″drive typeslottedhead styleround headmaterialsolid brasstensile strength50,000, 65,000 psidrive styleslottedhardness40-75 rockwell b min. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. Screw body size#3 (0. It is the load needed to pull the fastener apart. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. Yield30,000, 50,000 psipackage quantity100 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. Tensile strength, a common measure to compare the strength of a fastener. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation.

 

10 x 12 Solid Brass Round Head Wood Screw Qty 50 Pieces Slotted Drive Number 10 Size x 12 Length #ad

#10 x 1/2″ Solid Brass Round Head Wood Screw Qty 50 Pieces, Slotted Drive, Number 10 Size x 1/2″ Length

#10 x 1/2″ Solid Brass Round Head Wood Screw Qty 50 Pieces, Slotted Drive, Number 10 Size x 1/2″ Length #ad - . A screw designed for a wood or a similar material, with a point, a relatively coarse thread, a thick shank, and, usually, an unthreaded portion of the shank at the head end.

 

 6 X 38 Brass Flat Head Phillips Wood Screws Box of 100 #ad

# 6 X 3/8″ Brass Flat Head Phillips Wood Screws (Box of 100)

# 6 X 3/8″ Brass Flat Head Phillips Wood Screws (Box of 100) #ad - # 6 x 3/8″ brass flat head phillips wood screws (box of 100). Oil rubbed bronze finish adds an authentic look. Solid brass construction good for exterior use.

 

2x12 PHIL FLAT HEAD Brass Wood Screw 100box #ad

#2×1/2″ PHIL FLAT HEAD Brass Wood Screw (100/box)

#2×1/2″ PHIL FLAT HEAD Brass Wood Screw (100/box) #ad - Head height 0123″. Screws, solid brass. # 6 x 2″ brass flat head phillips wood screws (pack of 12). Head diameter 0303″. Tensile strength 50,000, 60,000 psi.

 

Brass Wood Screw Plain Finish Flat Head Slotted Drive 34 Length 10 Threads Pack of 100 #ad

Brass Wood Screw, Plain Finish, Flat Head, Slotted Drive, 3/4″ Length, #10 Threads (Pack of 100)

Brass Wood Screw, Plain Finish, Flat Head, Slotted Drive, 3/4″ Length, #10 Threads (Pack of 100) #ad - Threads specially designed for use in wood effectively resist pulling out. The typical composition is 70% copper and 30% zinc. Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. They generally feature a smooth, unthreaded shank below the head which ensures a tight attachment, and the threaded portion of the shank is tapered to increase the holding power. Wood screws are designed to attach two pieces of wood together. Strength increases with a higher percentage of zinc. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers. Length is measured from the top of the head. Brass is easily soldered and brazed and accepts plating readily.

 

3 x 58 Solid Brass Round Head Wood Screw Qty 100 Pieces Slotted Drive Number 3 Size x 58 Length #ad

#3 x 5/8″ Solid Brass Round Head Wood Screw Qty 100 Pieces, Slotted Drive, Number 3 Size x 5/8″ Length

#3 x 5/8″ Solid Brass Round Head Wood Screw Qty 100 Pieces, Slotted Drive, Number 3 Size x 5/8″ Length #ad - A screw designed for a wood or a similar material, with a point, a relatively coarse thread, a thick shank, and, usually, an unthreaded portion of the shank at the head end. .

 

Deltana SCWB1010 1 10 Solid Brass Wood Screw Oil Rubbed Bronze #ad

Deltana SCWB1010 1″ #10 Solid Brass Wood Screw, Oil Rubbed Bronze

Deltana SCWB1010 1″ #10 Solid Brass Wood Screw, Oil Rubbed Bronze #ad - Size 1 in. Color oil rubbed bronze. Limited 1 year mechanical and 1 year finish warrantyspecifications. A good selection of hinges bolts stops including kitchen and bath hardware built with continuous improvement in design has resulted in quality products which last a long time the products are developed after a good deal of research in order to ensure that the best of material is used and is weather proof and corrosion proof and is ideal for any environment features. Material solid brass.

 

Brass Wood Screw Plain Finish Flat Head Slotted Drive 14 Length 2 Threads Pack of 100 #ad

Brass Wood Screw, Plain Finish, Flat Head, Slotted Drive, 1/4″ Length, #2 Threads (Pack of 100)

Brass Wood Screw, Plain Finish, Flat Head, Slotted Drive, 1/4″ Length, #2 Threads (Pack of 100) #ad - Brass is easily soldered and brazed and accepts plating readily. Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Strength increases with a higher percentage of zinc. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers. The typical composition is 70% copper and 30% zinc. They generally feature a smooth, unthreaded shank below the head which ensures a tight attachment, and the threaded portion of the shank is tapered to increase the holding power. Threads specially designed for use in wood effectively resist pulling out. Wood screws are designed to attach two pieces of wood together.

 

Deltana SCWB1025 2-12 10 Solid Brass Wood Screw Oil Rubbed Bronze #ad

Deltana SCWB1025 2-1/2″ #10 Solid Brass Wood Screw, Oil Rubbed Bronze

Deltana SCWB1025 2-1/2″ #10 Solid Brass Wood Screw, Oil Rubbed Bronze #ad - Limited 1 year mechanical and 1 year finish warrantyspecifications. Size 25 in. Material solid brass. Color oil rubbed bronze. A good selection of hinges bolts stops including kitchen and bath hardware built with continuous improvement in design has resulted in quality products which last a long time the products are developed after a good deal of research in order to ensure that the best of material is used and is weather proof and corrosion proof and is ideal for any environment features.

 

Hillman Fasteners 385700 8 x 075 in Flat Head Brass Wood Screw 100 Pack #ad

Hillman Fasteners 385700 8 x 0.75 in. Flat Head Brass Wood Screw, 100 Pack

Hillman Fasteners 385700 8 x 0.75 in. Flat Head Brass Wood Screw, 100 Pack #ad - 41 in. 4 x 2. Finish, brass. 41 lbs. Features. . 100 pack. Size, 8 x 34 in. 4 x 0. . Dimension, 2. Phillips flat head wood screw. Item weight, 0.

 

8x3 PHIL FLAT HEAD Brass Wood Screw 100box #ad

#8×3″ PHIL FLAT HEAD Brass Wood Screw (100/box)

#8×3″ PHIL FLAT HEAD Brass Wood Screw (100/box) #ad - Please choose the size that you want from the dropdown menu above. Colorbronze tone. Material alloy(cadmium free).

 

4 x 34 Slotted Oval Head Solid Brass Wood Screw Qty 100 #ad

#4 x 3/4″ Slotted Oval Head Solid Brass Wood Screw Qty 100

#4 x 3/4″ Slotted Oval Head Solid Brass Wood Screw Qty 100 #ad - Yield30,000, 50,000 psipackage quantity100 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. 112″)body length3/4″drive typeslottedhead styleoval headmaterialsolid brasstensile strength50,000, 65,000 psidrive styleslottedhardness40-75 rockwell b min. It is the load needed to pull the fastener apart. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. Screw body size#4 (0. Tensile strength, a common measure to compare the strength of a fastener. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions.

 

 5 X 34 Brass Flat Head Phillips Wood Screws Box of 100 #ad

# 5 X 3/4″ Brass Flat Head Phillips Wood Screws (Box of 100)

# 5 X 3/4″ Brass Flat Head Phillips Wood Screws (Box of 100) #ad - Business and industrial. Fasteners and hardware. # 5 x 3/4″ brass flat head phillips wood screws (box of 100). Screws.

 

Brass Wood Screw Plain Finish Round Head Phillips Drive 38 Length 5 Threads Pack of 100 #ad

Brass Wood Screw, Plain Finish, Round Head, Phillips Drive, 3/8″ Length, #5 Threads (Pack of 100)

Brass Wood Screw, Plain Finish, Round Head, Phillips Drive, 3/8″ Length, #5 Threads (Pack of 100) #ad - They generally feature a smooth, unthreaded shank below the head which ensures a tight attachment, and the threaded portion of the shank is tapered to increase the holding power. Brass is easily soldered and brazed and accepts plating readily. Round head fasteners have a dome-shaped head. Threads specially designed for use in wood effectively resist pulling out. Strength increases with a higher percentage of zinc. Brass is rust proof, corrosion resistant and polishes to a rich, golden color. The typical composition is 70% copper and 30% zinc. An older style of head, it is typically used when replacing existing round-head fasteners where an exact match is desired. The phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material. Wood screws are designed to attach two pieces of wood together.

 

4 x 38034 Slotted Round Head Solid Brass Wood Screw Qty 100 #ad

#4 x 3/8034; Slotted Round Head Solid Brass Wood Screw Qty 100

#4 x 3/8034; Slotted Round Head Solid Brass Wood Screw Qty 100 #ad - There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. Yield30,000, 50,000 psipackage quantity100 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. It is the load needed to pull the fastener apart. 112″)body length3/8″drive typeslottedhead styleround headmaterialsolid brasstensile strength50,000, 65,000 psidrive styleslottedhardness40-75 rockwell b min. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. Screw body size#4 (0. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. Tensile strength, a common measure to compare the strength of a fastener. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel.

 

100 Piece No5 Brass Wood Screws 58 Flathead Slotted #ad

100 Piece No.5 Brass Wood Screws 5/8″ Flathead Slotted

100 Piece No.5 Brass Wood Screws 5/8″ Flathead Slotted #ad - Slotted head ideal for authentic restoration work. Solid brass construction good for exterior use. #5 x 5/8″ great for small crafts and woodworking.

 

 6 X 2 Brass Flat Head Phillips Wood Screws Pack of 12 #ad

# 6 X 2″ Brass Flat Head Phillips Wood Screws (Pack of 12)

# 6 X 2″ Brass Flat Head Phillips Wood Screws (Pack of 12) #ad - Head height 0123″. Head diameter 0303″. # 6 x 2″ brass flat head phillips wood screws (pack of 12). Tensile strength 50,000, 60,000 psi. Screw size #8 (0164″).

 

 8 X 2-12 Brass Flat Head Phillips Wood Screws Pack of 12 #ad

# 8 X 2-1/2″ Brass Flat Head Phillips Wood Screws (Pack of 12)

# 8 X 2-1/2″ Brass Flat Head Phillips Wood Screws (Pack of 12) #ad - Screws. Fasteners and hardware. # 8 x 2-1/2″ brass flat head phillips wood screws (pack of 12). Business and industrial.

 

7x12 PHIL FLAT HEAD Brass Wood Screw 100box #ad

#7×1/2″ PHIL FLAT HEAD Brass Wood Screw (100/box)

#7×1/2″ PHIL FLAT HEAD Brass Wood Screw (100/box) #ad - Fastener length 1-1/4″. Tensile strength 50,000, 60,000 psi. Head diameter 0435″. Head height 0184″. Screw size #14 (0242″).





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.